MISC REPAIRS OF WOODEN FURNITURE INCLUDING CANNING AND REPAIR TO BED PLY TOP, TABLES AT AFS, REPAIR TO STEEL FURNITURE, GI CHARPOY, MISC TP FURNITURE AND PAINTING OF STEEL FURNITURE AT AFS AND 5 AFH UNDER GE (AF) JORHAT

Amount

TABLE 900 x 600MM WITH DRAWER (DRG NO. FD-283) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Table 900x600mm with drawer and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished with finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Table Top 900x600mm with 18mm thick prelaminated particle board and around 4mm thick 2nd class hard wood edging.

Legs made out of 2nd class hard wood.

Side Long Rail made of 2nd class hard wood.

Side Short Rail made of 2nd class hard wood.

Stiffener 25x40mm made out of 2nd class hard wood.

Drawer all as specified and shown on drawing.

CHAIR DINING (DRG NO. FD-279) Removing/taking out carefully old unserviceable worn out/broken/damaged parts chair dining and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished and finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Front Leg made out of 2nd class hard wood

Rear Leg made out of 2nd class hard wood

Stiffner made out of 2nd class hard wood

Front/Side Rail with necessary holes for canning made out of 2nd class hard wood.

CHAIR WRITING (DRG NO. FD-280) Removing/taking out carefully old unserviceable worn out/broken/damaged parts chair Writing and M&L as required of the same (as listed below) with new materials/ components of the same size, shape and fixing complete including polished and finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Front Leg made out of 2nd class hard wood

Rear Leg made out of 2nd class hard wood

Stiffner made out of 2nd class hard wood

Front/Side Rail with necessary holes for canning made out of 2nd class hard wood.

Arm Rest made out of 2nd class hard wood.

TABLE DINING 08 PERSONS (DRG NO. FD-273) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Table Dining 08 Pers and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished and finish to receive complete all as specified and as directed all as shown on drawing of the followings:-

Leg made out of 2nd class hard wood.

Table top of size 1800x900x18mm thick with prelaminated particle board with around 4mm thick 2nd class hard wood edging.

Side rail long of 2nd class hard wood.

Side rail short of 2nd class hard wood.

BED PLY TOP (DRG NO. FD-246) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Bed Ply Top and M&L as required of the same (as listed below) with new materials/ components of the same size, shape and fixing complete including polished and finish to receive complete all as shown and as specified on drawing and as directed of the followings:-

Head Board provided.

Foot Board provided

Long Rail made out of 2nd class hard wood

Short Rail made out of 2nd class hard wood

Leg made out of 2nd class hard wood

12 mm thick plywood of size 1890mm x 900mm bed top BWR commercial

S&F steel knobs suitable for drawers of wooden furniture complete all as specified and as directed

TABLE COMPUTER (TP) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Table Computer (TP) and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as shown and as specified on drawing and as directed of the followings:-

S&F with new one of Table Computer drawer sliding channels as per existing size, shape and model after removing the old unserviceable one .

S&F with with new one of Table Computer key board drawer as per existing size, shape and model after removing th old unserviceable one.

S&F with with new one of Table Computer Top as per existing size, shape and model after removing th old unserviceable one.

M&L for re-canning with new plastic cane, 2mm wide oval type in white colour and border with 4mm wide complete all as specified and as directed.

TABLE 900x900MM WITHOUT DRAWER (DRG NO. FD-291) M&L for Table Top of size 900x900mm with 18mm thick prelaminated particle board without drawer and around 4mm thick with 2nd class hard wood edging after removing/taking out carefully old unserviceable broken/damaged table top of the same size, shape and fixing complete including polished to finish to receive all as shown and as specified on drawing complete as directed.

CHAIR DINING LONG BACK (SPL) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Chair Dining Long Back (SPL) and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as shown and as specified on drawing and as directed of the followings:-

Cushion and rexine and as per existing shape and size.

Front leg made out of 2nd class hard wood.

Stiffener made out of 2nd class hard wood.

TABLE DRESSING LADIES (DRG NO. FD-251) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Table Dressing Ladies and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as shown and as specified and as specified on drawing and as diorected of the followings:-

Looking mirror with frame and 8mm thick plywood BWR grade on back of frame mirror of size 1220x380x5mm thick and applying one or more coats of french polish to the frame after preparation of surfaces.

Back with 12mm thick ply commercial type.

4mm thick ply teak face.

Drawer all as existing and specified size.

SOFA SET SINGLE SEATER (DRG NO. FD-281) Taking down old unserviceable following components parts of single seater sofa and M&L 2nd class hard wood (as per existing shape and size) and applying one or more coats of french polish after preparation of surfaces complete all as shown and as specified on drawing and as directed of the followings:-

Back rail of single seater sofa.

Front rail of single seater sofa.

Leg of single seater sofa.

Side rail of single seater sofa.

Arm rest.

M&L for sofa foam cushion of size 530x560mm, 100mm thick, 40mm density and covered with new tepastry cloth with superior quality (as approved from GE) after and including taking out old unserviceable foam cushion with cover from sofa set single seater.

Wooden bearers of size 40x40mm.

BIN LINEN MULTIPURPOSE (DRG NO. FD/E6/MAP/09) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Bin Linen Multipurpose and M&L as required of the same (as listed below) with new materials/components of the same as existing size, shape and fixing complete including polished to finish to receive complete all as shown and specified on drawing and as directed of the followings:-

Top of with 18mm thick prelaminated partilce board, interior grade.

Magnetic Catcher

Shutter.

Drawer.

Handle.

TABLE CENTRE (DRG NO. FD-274) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Table Centre and M&L as required of the same (as listed below) with new materials/components of the same as existing size, shape and fixing complete including polished to finish to receive complete all as shown and as specified on drawing and as directed of the followings :-

Table top of size 900x450x18mm thick prelaminated particle board with around 4mm thick with 2nd class hard wood edging.

Leg made out of 2nd class hard wood

Side rail long of 2nd class hard wood

Side rail short of 2nd class hard wood

CHAIR WOODEN BOTTOM (DRG NO. FD-285) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Chair Wooden Bottom and M&L as required of the same (as listed below) with new materials/components of the same as existing size, shape and fixing complete including polished to finish to receive complete all as shown and as specified on drawing and as directed of the followings:-

Front Leg made out of 2nd class hard wood.

Rear Leg made out of 2nd class hard wood.

Stiffner made out of 2nd class hard wood.

Seat 6mm thick with plywood commercial type.

BED HARD (MAP) (DRG NO. FD/E6/MAP/08(R) M&L bed hard top of size 1890mmx900mm with new 12mm thick plywood, BWR commercial type and fixing to receive complete all as shown and as specified on drawing after and including removing/taking out carefully old unserviceable broken/damaged parts of bed hard (MAP) complete all as shown and as specified on drwaing and as directed.

SOFA SET 05 SEATER (DRG NO. FD-281) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Sofa set 05 seater and M&L as required with 2nd class hard wood of the same as existing size, shape and fixing complete including polished to finish to receive complete all as shown and as specified on drawing and as directed of the followings:-

Back rail of single seater sofa.

Back Rail of 03 Seater Sofa.

Front rail of single seater sofa.

Front Rail of 03 Seater Sofa.

Side Rail.

Arm Rest.

Wooden bearers of size 40x40mm

PEG TABLE (DRG NO. FD-277) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Peg Table and M&L as required of the same with new materials/components of the same as existing size, shape and fixing complete including polished to finish to receive complete all as shown and as specified on drawing and as directed of the followings:-

Table Top of size 450x300x18mm thick with prelaminated particle board and around 4mm thick 2nd class hard wood edging.

Legs made out of 2nd class hard wood.

Side rail long with 2nd class hard wood.

Side rail short with 2nd class hard wood.

CHAIR EASY (DRG NO. FD-229) Removing/taking out carefully old unserviceable worn out/broken/damaged parts chair easy and M&L with 2nd class hard wood as required of the same with new materials/components of the same as existing size, shape and fixing complete including polished to finish to receive complete all as shown and as specified on drawing and as directed of the followings:-

Front Legs

Rear Legs.

Front/side rail with necessary holes for canning.

Arm rest.

TABLE 1520x860x760MM (DRG NO. FD-289) M&L for table top of size 1520x860mm with 18/19mm thick new prelaminated particle board as existing size and shape after and including removing/taking out carefully of old unserviceable broken/damaged parts of table 1520x860x760mm complete all as shown and as specified on drawing and as directed.

POLISHING Removing of old fade out polished by polish remover/ scrapper or by caustic soda or by any other means without damaging surfaces of furniture as listed below, making the surface smooth and free from dust and applying high class french spray polish till glossy/shine finish complete all as specified and as directed of the followings:-

Side Board (Drg No. FD-241)

Chair W/B without Arm. (Drg No. FD-285)

Peg Table (Drg No. FD 277)

Sofa Set 05 Seater (Drg No. FD-281)

Stool Dressing (Drg No. FD-282)

Teapoy (Drg No. FD-278)

Table Centre (Drg No. FD-274)

Table writing (Drg No. FD-275)

Chair Dining JCO/ORs (Drg No. FD/MAP-II/05)

Table of size 900x600x760 mm without drawer (Drg No. FD-284)

Table of size 900x600x760 mm with drawer (Drg No. FD-283)

Chair Dining Officers (Drg No. FD/MAP-II/04)

Chair Dining Long Back (SPL)

Table Bed Side (Drg No. FD 276)

Table Dining 06 Pers (Drg No. FD-273)

Table Dining 04 Pers (Drg No. FD/E6/MAP-II/03)

Table Dining 08 Pers (Drg No. FD-273)

Book Case (Drg No. FD-237)

Sofa set 04 Seater (Drg No. FD-281)

Sofa Single Seater (Drg No. FD-281)

Chair Easy (Drg No. FD-17 and FD-229)

Bed Ply top (Drg No. FD-246)

Chair Dining CB (Drg No. FD-279)

Table Centre 02 Tier (Drg No. FD/E6/MAP/08)

Chair Writing (Drg No. FD-280)

Table Dressing Ladies (Drg No. FD-378)

Table office clerk wooden (Drg No. FD-84M)

Table Office Officer Wooden (Drg No. FD-84M)

TABLE CLERK STEEL (DRG NO. FD-1004)

S&F drawer made out of 1m thick mild steel with all the necessary cutting, moulding, make hole, welding, etc. and applying two coats of synthetic enamel paint over and including one coat of red oxide primer with spray painting compressure after surface preparation by removing drawer complete all as shown on drawing and as directed.

S&F Lock 3 way, 6 lever for table clerk steel including removing unserviceable drawer lock complete all as shown on drawing and as specified and as directed.

S&F PVC recess handle of best quality including fixing with self tapping screw as shown in drawing,including removing unserviceable handle complete all as shown on drawing and as directed.

S&F hard rubber shoe including removing unserviceable rubber shoe complete as shown in drawing and as directed.

S&F as in repair top of table clerks steel 18mm thick pre-laminated particle board with 4mm thick around 2nd class hard wood edging all as specified all as shown on drawing and as directed.

TABLE OFFICER STEEL (DRG NO. FD-1003)

All as per Serial item No. 22.01 here-in-before but drawer.

S&F Lock 3 way, 6 lever for table officers steel including removing unserviceable drawer lock complete all as shown on drawing and as directed.

S&F PVC recess handle of best quality including fixing with self tappig screw as shown in drawing, including removing unserviceable hande complete all as specified all as shown on drawing and as directe.

S&F hard rubber shoe best quality, including removing unserviceable rubber shoe complete all as shown on drawing and as directed.

S&F as in repairs top of table officers steel 18mm thick pre-laminated particle board with 4mm thick around 2nd class hard wood edging complete all as specified all as shown on drawing and as directed.

ALMIRAH LARGE STEEL (DRG NO. FD-1031)

S&F Leg of Almirah large steel made out of 1mm thick mild steel sheet as shown on drawing and applying two coats of synthetic enamel paint over and including one coat of red oxide primer with a spray painting compressure after and including surface preparation and removing unserviceable legs complete all as shown on drawing and as directed.

All as per Serial item No. 24.01 here-in-before but shelves of almirah large steel

All as per Serial item No. 24.01 here-in-before but door of almirah large steel.

S&F Locking device including locking rods for almirah large steel including removing of unserviceable locking device complete all as shown on drawing and as directed.

S&F Handle 150 mm long, chromium plated for Almirah Large steel including removing of unservceable hande complete all as shown on drawing and as directed.

S&F Lock universal type 6 levber made out of mild steel, powder coated for Almirah Large steel including removing of unserviceable lock complete all as shown on drawing and as directed.

S&F butt hinges of existing Almirah Large steel complete all as shown on drawing and as directed.

ALMIRAH MEDIUM STEEL (DRG NO. FD-1032)

All as per Serial item No. 24.01 here-in-before but leg of almirah medium steel.

All as per Serial item No. 24.02 here-in-before but shleves of almirah medium steel.

All as per Serial item No. 24.03 here-in-before but door of almirah medium steel.

All as per Serial item No. 24.04 here-in-before but locking device of almirah medium steel.

All as per Serial item No. 24.05 here-in-before but handle of almirah medium steel.

All as per Serial item No. 24.06 here-in-before but lock for almirah medium steel.

S&F of butt hinges of existing almirah medium steel complete all as shown on drawing and as directed.

LOCKER BED SIDE STEEL (DRG NO. FD-1029)

All as per Serial item No. 24.01 here-in-before but leg of locker bed side steel.

All as per Serial item No. 24.02 here-in-before but shleves of Locker bed side steel.

All as per Serial item No. 24.03 here-in-before but door of Almiarh Medium Steel.

S&F handle 100mm long of mild steel chromium plated for locker bed side steel including removing of old unserviceable handle complete all as shown on drawing and as directed.

S&F hasp and staple 75mm long mild steel chromium plated for locker bed side steel including removing of unserviceable hasp and staple complete all as shown on drawing and as directed.

S&F butt hinges of existing Locker Bed Side steel complete all as shown on drawing and as directed.

CHAIR SCHOOL WITH HAND BOARD (DRG NO. FD/E6/MAP/05)

S&F writing pad made out of 18mm thick prelaminated particle board top openable with PVC edging (hinged on RHS screwed to 25mm dia hollow steel pipe inserted in 20mm MS rod welded to frame) including removing unserviceable top complete all as specified and shown on drawing and as directed.

S&F one piece PVC back and seat (blow plast or equivalent) complete all as specified and all as shown on drawing and as directed.

S&F frame of chair school as existing with hand board made out of 25mm dia mild steel pipe with all necessary workmanship like cutting, bending, making holes and welding, etc. including removing of unserviceable frame and applying two coats of synthetic enamal paint black with spray compressure rest after and including surface preparation complete all as specified and all as shown on drawing and as directed.

S&F hard plastic shoe in repair complete all as specified and all as shown on drawing and as directed.

RACK SHOE STEEL (DRG NO. FD/E6/MAP/02(R)

S&F frame of rack shoe steel as existing made out of 25mm dia mild steel pipe with all necessary workmanship like cutting, bending, making holes, welding, etc. including removing of unserviceable frame and applying two coats of synthetic enamal paint black with spray compressure rest after and including surface preparation complete all as specified and all as shown on drawing and as directed.

S&F shelves of rack shoe steel with all necessary workmanship like cutting, bending, making holes, welding, etc. including removing of unserviceable shelves and applying two coats of synthetic enamal paint black with spray compressure rest after and including surface preparation complete all as specified and all as shown on drawing and as directed.

S&F hard plastic shoe in repairs complete all as specified and all as shown on drawing and as directed.

CHAIR VERANDAH [DRG NO. FD-259]

Removing of old unserviceable plastic cane from seat and back of chair verandah and recanning of seat and back with 4 mm wide half round plastic cane of best quality complete all as specified and all as shown on drawing and as directed by Engr-in-charge.

S&F of leg of chair verandah made out of 20mm dia mild steel pipe with all necessary workmanship like cutting bending making holes and welding including removing of unserviceable leg and apply two coat of synthetic enamal paint black with spray compressure rest complete all as specified and all as shown on drawing and as directed by Engr-in-charge.

S&F hard plastic shoe in repair complete all as specified and all as shown on drawing and as directed by Engr-in-charge.

CHAIR CB STEEL WITHOUT ARM [FD-75(M)]

S&F seat of chair CB without arm made out of 2nd class hard wood including weaving of plastic cane, 2mm wide, bordered with 3mm, half round type white Godrej pattern, fitting shelf on frame with self tapping screw neatly. All wooden exposed parts shall be french polished up to a glossy finish or paint enamel black colour complete all as shown and specified on drawing and as directed.

All as per Serial item No. 30.01 above but back of chiar CB steel without arm.

CHAIR CB STEEL WITH ARM (DRG NO. FD-75(M)

All as per Serial item No. 30.01 here-in-before but for seat of chair CB steel with arm.

All as per Serial item No. 30.01 here-in-before but for back of chair CB steel with arm.

S&F handle for Chair CB steel with arm made out of 2nd class hard wood and applying french polish upto glossy finish or black paint complete all as shown and as specified on drawing and as directed.

GI CHARPOY (DRG NO. FD-220)

S&F GI charpoy long rail of GI Pipe, 32mm bore (dia), medium grade duly threaded both ends upto the required length and fitted to frame of charpoy including taking out old existing partially damaged long rail from 3 way elbow by unscrewing complete all as shown and as specified on drawing and as directed.

Cutting long rail to make short rail and threading both ends upto the rquired length including straightening whre required and fixing including taking out old existing partially damaged/unserviceable short rail by unscrewing from three way elbow complete all as shown and as specified and as directed. Note : Old serviceable long rail obtained from Serial item No. 32.01 shall re-used.

Cutting short rail (retrieved from Serial Item No. 32.01 here-in-before) to make legs and threading one ends including straightening whre required and fixing including providing 2 Nos mild steel flat iron of size 20x3mm clamps and providing mild steel flat iron or washer to bottom of mild steel clamps, welded to leg and appying one coat of black paint over and including one coat of red oxide zinc chrome primer including taking out old damaged/unserviceable legs by unscrewing from three way elbow complete all as shown and as specified on drawing and as directed. Note : Old serviceableshort rail obtained from Serial item No. 32.02 shall re-used.

S&F GI elbow 3-way, ISI marked suitable for GI pipe 32mm bore (dia) for GI charpoy including taking out old unserviceable GI elbow from the frame complete all as shown and as specified on drawing and as directed.

S&F GI check nut, ISI marked suitable for GI pipe 32mm bore (dia) for GI charpoy including taking out old unserviceable GI check nut from the frame complete all as shown and as specified on drawing and as directed.

S&F MS flat iron 6mm thick to charpoy GI pipe with nut and washer complete all as shown and as specified and on drawing and as directed.

S&F as in repairs plywood for charpoy GI pipe with 8 numbers of screw 65mm with nut and washer complete all as shown and as specified on drawing and as directed.

CHAIR EXECUTIVE REVOLVING LONG BACK TP

S&F PVC pedestal with castors (wheel) of chair executive revolving long back complete all as shown and as specified on drawing and as directed.

S&F of hydraulic piston (for height adjustment) of chair executive revolving long back complete all as shown and as specified on drawing and as directed.

S&F of castor wheel of chair execuitve revolving long back complete all as shown and as specified and on drawing and as directed.

S&F new tapestry cloth of superior quality for seat and back of chair executive revolving back duly stritched as per existing shape after and including removing old unserviceable tapestry cloth complete all as shown and as specified on drawing and as directed.

S&F PVC handles of chair executive revolving long back of existing shape and size including removing of unserviceable handle complete all as shown and as specified on drawing and as directed.

CHAIR WRITING MAP (DRG NO. FD/E6/MAP/12)

S&F new tapestry cloth of superior quality for seat and back of chair writing MAP duly stritched as per existing shape including removing old unserviceable tapestry cloth complete all as shown and as specified on drawing and as directed.

TABLE BED SIDE (MAP) [DRG NO. FD/E6/MAP/15(R)]

S&F top of table bed side (MAP) including removing of unserviceable old existing top complete all as shown as specified on drawing and as directed.

S&F left/right side table bed side (MAP) including removing old existing unserviceable one complete all as shown and as specified on drawing and as directed.

S&F handle of table bed side (MAP) including removing of old unserviceable one complete all as shown and as specified on drawing and as directed.

S&F drawer of table bed side (MAP) including removing old unserviceable one complete all as shown and as specified on drawing and as directed.

TABLE 900X600X760 MM WITH DRAWER STEEL (DRG NO. FD-1008) S&F table top of size 900x600mm with 18/19mm thick prelaminated particle board including edges of table 900x600x760mm after and including taking up/removing old unserviceable one all as shown and specified on drawing and as directed.

ALMIRAH LARGE GLAZED STEEL [DRG NO. FD-104(M) ]

S&F door glass of Almirah large glaged steel including taking down/removing old brocken glass complete all as shown and as specified on drawing and as directed.

S&F locking device of Almirah large glaged steel including taking down/removing old unserviceable one complete all as shown and as specified on drawing and as directed.

S&F handle of Almirah large glaged steel including taking down/removing old unserviceable one complete all as shown and as specified on drawing and as directed.

ALMIRAH MEDIUM GLAZED STEEL [DRG NO. FD-104(M)]

S&F door glass of Almirah medium glaged steel including taking down/removing old brocken glass complete all as shown and as specified on drawing and as directed.

S&F locking device of Almirah medium glaged steel including taking down/removing old unserviceable one complete all as shown and as specified on drawing and as directed.

S&F handle of Almirahmedium glaged steel including taking down/removing old unserviceable one complete all as shown and as specified on drawing and as directed.

M&L for welding point not less then 25mmx5mm of existing steel furniture as required complete all as directed.

PAINTING OF STEEL FURNITURE M&L preparing external and internal surface of steel furnitures including de-rusting/scratching, paste putty, snading, etc. and applying two coats of synthetic enamel paint over and including one coat of red oxide primer with spray paint, 1st grade quality (as per existing colour/required colour) compressor complete all as specified and as directed of the following steel furnitures:-

Book Case steel

Locker Bed side steel

Rack steel enclosed back of size 1905x910x455mm

Rack six tier steel

Rack adjustable six tier of size 1905x910x455mm

Rack pigeon hole steel 18 holes of size 1905x915x540mm

Chair CB steel without arm

Chair CB steel with arm

Almirah Large steel

Almirah Medium steel

Locker six unit steel

Stool steel

Table clerk steel

Table office officer steel

Chair Verandah

Table 3' x 2' with drawer steel

Almirah Large glazed steel

Almirah Medium glazed steel

Chair school with hand board

Rack shoe steel NOTE:- The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ

M/S DHAR AND DHAR (BID ID -3187115)

M/S AJOY DUTTA CHOWDHURY & CO (BID ID -3186470)

A M CHOUDHURY AND CO (BID ID -3187059)

NIHAR ENTERPRISE (BID ID -3185176)

M/S SANTOSHI TRADERS (BID ID -3186019)

SANDHUSONS (BID ID -3186856)

Bidder Name

NIHAR ENTERPRISE

SANDHUSONS

A M CHOUDHURY AND CO

M/S GOSWAMI BROTHERS

M/S DHAR AND DHAR

M/S SANTOSHI TRADERS

M/S AJOY DUTTA CHOWDHURY & CO