REPAIR TO SUNKEN FLOOR OF TOILETS IN MD ACCN OF WO IN NORTH CAMP AT ATS BELAGAVI UNDER GE(AF) SAMBRA

Amount

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good in cement mortar 1:4 complete all as specified & directed.

Taking down chowkhats or frames exceeding 1.5 Sqm each but not exc 4 Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good in cement mortar 1:4 complete all as specified & directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified & directed.

Dismantling and breaking up drain pipes (salt glazed ware, AC, reinforced concrete, PVC or Cast iron) set in cement mortar of size 100mm/75mm fixed over wall or in floor including clamps etc., complete all as specified & directed.

Demolition of reinforced cement concrete of any description and in any position (below or above ground level), complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), cement slurry/paste of any thickness and in any position and rubbish off the premises complete all as specified & directed.

Supply, hoisting and fixing of triple layer wall construction, 500 Litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) fixed in position all as specified in SSR Part -I including two nos PTMT/UPVC tank nipple and 25mm bore PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball including dismantling of existing water storage tanks of any capcity & any type complete all as specified & directed.

M&L for providing and laying cement concrete (1:2:4), type B-1 (using 20mm nominal size crushed and graded stone aggregate) for in mud stops, roof kerbs, rounded or chamfered or similar items finished fair and even including necessary form work complete all as specified & directed.

M&L for providing and laying cement concrete, 25mm thick, (1:2:4), type B-0 (using 12.5mm nominal size crushed and graded stone aggregates) for levelling/to receive screed for laying floor finish, finished even and smooth without using extra cement complete all as specified & directed.

M&L for 15mm thick cement plaster in CM 1:6 over walls surface of any description and material, finished even & smooth without using extra cement including taking down of existing plaster complete all as specified & directed.

M&L for 15mm thick cement plaster in CM 1:4 over walls surface of any description and material, finished even & smooth without using extra cement including taking down of existing plaster complete all as specified & directed.

M&L for 10mm thick cement plaster in CM 1:3 over ceiling surface of any description and material, finished even & smooth without using extra cement including taking down of existing plaster complete all as specified & directed.

M&L for applying evenly a tack coat of industrial bitumen of grade 85/25 @ 1.2 kg per Sqm without leaving the pores/voids in the surface over primed including cleaning the surfaces & taking down existing water proofing treatment complete all as specified and directed.

M&L for applying bitumen based primer for use in waterproofing and damp-proofing treatments applied @ 0.30 liter per Sqm in two coats over concrete/plastered surface including cleaning the surface complete all as specified and directed.

Supplying and laying of 20mm nominal size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete all as specified and directed.

Supplying and laying of 32mm nominal size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete all as specified and directed.

S&F in repairs 32mm nominal bore bore dia CPVC, globe or gate valves, connected with pipe with solvent of any material complete all as specified & directed.

M&L for two coats of oil bound distemper over a coat of primer on walls, pillasters, cornices, etc., on newly plastered surfaces using spunge roller including one coat of primer over 2mm thick wall care putty in two coats complete all as specified & directed.

M&L for three coats of white wash on newly plasterd ceiling surfaces including necessary filling of voids with wall care putty complete all as specified & directed.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm² , modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed.

S&F 125mm long cast type anodised aluminium handle complete all as specified & directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid one side decorated and other side plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified & directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including necessary PCC bedding, "P" or "S" PVC trap connected to PVC/CI pipes completeall as specified and directed.

S&F wall mounted Sheet glass shelf assembly consisting of acrylic sheet shelf 12cm wide with chromium plated bracket guard and railing, 60cm long complete all as specified & directed. Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

M&L for coloured non-skid ceramic tiles 6mm to 7mm thick (square/rectangular) area of each tiles exceeding 0.08 sqm but not exc 0.36 sqm in floor, set and jointed in neat cement slury and pointed in white cement with pigment to match the shade of tiles including cement screed bed or bedding layer of 15mm thick in cement mortar 1:4 complete all as specified & directed. Make: Somany, Kajaria, Johnson, Orient or equivalent make as specified in list of makes of Particular Specifications

M&L for coloured glazed ceramic tiles joint less/edge cutted of size area of each tiles exceeding 0.08 sqm but not exc 0.18 Sqm, 6mm to 8mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick backing/rendering in cement mortar (1:4) complete all as specified & directed. Note:- Those tiles fixed right angled to each other, the each tile should be chamfered/trim/sharp at 45 degrees at joint/corner/edge, the quoted rates are inclusive of this. Make: Somany, Kajaria, Johnson, Orient or equivalent make as specified in list of makes of Particular Specifications

S&F 75mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with necessary clamps complete all as specified & directed. Make: Astral, Prince, Finolex or equivalent make as specified in list of makes of Particular Specifications

S&F 75mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified & directed. Make: Astral, Prince, Finolex or equivalent make as specified in list of makes of Particular Specifications

S&F 110mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with necessary clamps complete all as specified & directed. Make: Astral, Prince, Finolex

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified & directed. Make: Astral, Prince, Finolex or equivalent make as specified in list of makes of Particular Specifications

S&F PVC (SWR) floor trap of outlet dia 75mm, plain with SS gratings 125X125mm size with openable circular grating with or without hole including jointing with solvent cement including fixing to pipe properly with solvent complete all as specified & directed. Make: Astral, Prince, Finolex or equivalent make as specified in list of makes of Particular Specifications

S&F PVC (SWR) bends with access door for 75 mm bore pipe complete all as specified & directed. Make: Astral, Prince, Finolex or equivalent make as specified in list of makes of Particular Specifications

S&F PVC (SWR) bends with access door for 110 mm bore pipe complete all as specified & directed.Make: Astral, Prince, Finolex or equivalent make as specified in list of makes of Particular Specifications

S&F PVC (SWR) junction single, (Single T) equal or unequal size with access door for 75 mm bore pipe complete all as specified & directed. Make: Astral, Prince, Finolex or equivalent make as specified in list of makes of Particular Specifications

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door for 110mm bore pipe complete all as specified & directed. Make: Astral, Prince, Finolex or equivalent make as specified in list of makes of Particular Specifications

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified & directed. Make: Astral, Prince, Finolex or equivalent make as specified in list of makes of Particular Specifications

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified & directed.Make: Astral, Prince, Finolex or equivalent make as specified in list of makes of Particular Specifications

M&L for 50mm bore dia high density polyethylene pipes (HDPE) and fittings of pressure rating 6kgf/cm² fixed complete to walls, ceilings or in floors as drain out pipe etc., including necessary cutting and chasing in wall or floor of any description complete all as specified & directed.

M&L for mirror polishing on Marble/ Granite/ Kota stone/ stone work where ever required to give high gloss finish including necessary T & P, filling compound like Teenax or equivalent to fill in the gap/cracks etc. complete all as specified and directed.

M&L for Golden colour epoxy filling in Granite stone joints of size 3mm widthX12mm depth including cutting joints in existing/new granite floor complete all as specified and directed.

S&F in repairs fancy type 15mm bore dia long body fancy type bib tap chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified & directed. Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

S&F in repairs fancy type 15mm bore dia short body fancy type bib tap chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified & directed. Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

S&F in repairs 15mm bore dia fancy angle stop valve, chromium plated, cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified & directed. Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed. Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

S&F in repairs 10 liter PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, and handle/push type, including 32mm bore dia PVC long/short flusing pipe and brackets complete all as specified & directed. Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

S&F in repairs 15mm bore dia fancy concealed long body stop valve, chromium plated, cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified & directed. Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

S&F in repairs Fancy type square shape of minimum size 100mmX100mm swivel shower of cast stainless steel, including CP finish shower rod (long) and cup washer/wall flange for fixing with 15mm bore dia pipe/fittings complete all as specified & directed. Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

S&F in repairs vitreous china wash hand basin, white in colour, flat back of size 550mmX400mmX200mm including pedestal, and 32mm bore dia CP finish copper alloy waste fitting/coupling, 32mm bore dia PVC waste pipe including cutting for and pinning in ends of brackets or erecting stand brackets complete all as specified & directed. Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

S&F in repairs fancy swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified & directed. Make: Cera, Hindware, Jaquar, Prayag or equivalent make as specified in list of makes of Particular Specifications

M&L for preparing, washing, rubbing down and complete removal of existing treatment for applying two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on old decorated surfaces of walls including necessary filling of voids with wall care putty complete all as specified & directed.

S&F in repairs tubular brass chromium plated Towel rail 20mm dia "D" type 60cm long between flanges complete all as specified & directed.Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

S&F in repair CP finish soap dish cast stainless steel fixed to plugs complete all as specified & directed. Make: Jaquar, Cera, Hindware, Prayag or equivalent make as specified in list of makes of Particular Specifications

S&F aluminium body pegs, solid body, 125mm to 175 mm complete all as specified & directed.

M&L for 12mm thick in CM 1:4, cement mortar plaster over old/new RCC/PCC surfaces of wall and floor using 1% by weight of cement, liquid integral water proofing compound finished even and smooth without using extra cement. After curing and drying of surface, apply solution of one coat, grey cement mixed with chemical Tapecrete P-151(Make CICO)/Pidicrete URP (Make Dr Fixit)/or equivalent product of Fosroc mixed in 1:2(one part chemical two parts of grey cement) proportion, apply with painting brush/roller to seal the pores in wall, slab and floor. After drying providing and laying of fiber mesh cloth over entire area and apply solution in two coats, white cement mixed with chemical Tapecrete P-151(Make CICO)/Pidicrete URP (Make Dr Fixit)/or equivalent product of Fosroc , mixed in 1:2 (one part chemical two parts of white cement) proportion including preparation of surface, cleaning as per manufacturer’s instructions complete all as specified and directed.

M&L for providing pre-cast man hole cover/cover slab in reinforced cement concrete 1:2:4, type B-1 (using 20mm nominal size crushed and graded stone aggregates) set in cement mortar 1:6, complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape as required including cranking bending or hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F Aluminium ventilator shutters powder coated (minimum thickness of powder coating 50 micron including frame and aluminium louvered with frosted glass as fixed or in louvered sections of not less than 60mm width & 1.50mm thick including necessary joining cleats, glazing clips, EPDM rubber packing, snap beading, screws, peg stays complete all as specified & directed. , Hindalco or equivalent make as specified in list of makes of Particular Specifications

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium section of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium section of standard section around the opening complete all as specified and directed.

M&L for providing and laying cement concrete (1:5:10), type E-2, (using 40mm nominal size crushed and graded stone aggregate) for filling and work finished fair and even complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:4 over wall/floor surface finished fair and even surface to receive chemical slurry/paste. S & F 5-9mm thick glossy mosaic ceramic tile of size and appd cheque shade/colour not more than 40mmX40mm each duly fixed with compound MYK Laticrete, Ag Silver thin set adhesive or equivalent.as per manufacturers instructions, The joints shall be grouted with MYK Laticrete SP-100 or equivalent, cleaning the tile etc; complete in all respect.

M&L for providing and laying cement concrete, 75mm thick, 1:3:6, type C-1 (using 20mm nominal size crushed and graded stone aggregate) for plinth protection including filling of expansion joint with bituminous mixture finished fair and even complete all as specified & directed.

M&L for preparation of old decorated painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint duly filled the voids with enamel based putty complete all as specified & directed.

M&L for three coats of white wash on old decorated surfaces of ceiling including necessary filling of voids with wall care putty complete all as specified & directed.

M&L for preparing, washing, rubbing down and stopping of distempered surface and complete removal of existing treatment and painted surfaces and applying two coats of oil bound distemper using spunge roller including one coat of primer over 2mm thick wall care putty in two coats on walls, pillasters, cornices, etc., complete all as specified & directed.

S & F Aluminium sliding windows shutters powder coated (minimum thickness of powder coating 50 micron) including powder coated main frame, three track (two for glazed and one for wire mesh) without sash bars including necessary jointing cleats, glazing clips, EPDM rubber packing, powder coated aluminium snap beading, screws, wheels, locking arrangments, suitable handles for sliding purpose, 4mm thick plain glass and stainless steel wire mesh of dia 0.36mm and 1.40mm width of aperature, silicon chemical filling at gaps between section frame and wall surfaces complete all as specified and directed with the following sections of sliding window :- (a) Main Frame bottom section : Make:-Jindal section No 20798 or equivalent make as specified in list of makes of Particular Specifications (b) Main Frame top & sides section : Make:-Jindal section No 20678 or equivalent make as specified in list of makes of Particular Specifications (c) Sliding shutter section (handle ) : Make:-Jindal section No 20707 or equivalent make as specified in list of makes of Particular Specifications (d) Sliding shutter section for top & bottom : Make:-Jindal section No 20842 or equivalent make as specified in list of makes of Particular Specifications (e) Sliding shutter section for interlock : Make:-Jindal section No 21091 or equivalent make as specified in list of makes of Particular Specifications

M/S MAHADEV M PATIL (BID ID -3479839)

M/S ADITYA CONSTRUCTIONS (BID ID -3481055)