Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹43.3 LSame as L1Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹43.8 L+₹51,171.17 (1.18%)Rejected-AOC 728 1 JOGIWARA VISHAVKARMA MANDIR ROAD AMBALA CITY | AMBALA CITY | AMBALA | HARYANA | 134003 | L3 | Rejected-AOC L3 | |
| 4 | L4₹45.1 L+₹1.8 L (4.15%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹44.8 L
EMD Value
₹89,600
Closing Date
8 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Hakimpet
Secunderabad
PROVN OF BELL MOUNTING AND SHIFTING OF SUB GUARD ROOM GATE, PROVN OF POL STORE AND WASHROOM AT KIRAN CR AND SS AND ADDN/ALTN TO SEWAGE SYSTEM AND PROVN OF GREASE TRAPS AT CERTAIN LOCATIONS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET
2023_MES_581985_2
8479/E8
Open Tender
Civil Works
Item Rate
180 days
Hakimpet
As per NIT
6 documents required · 6 mandatory
₹500
GE (AF) Hakimpet
₹89,600
Yes
18 May 2023
24 Mar 2023
10 Apr 2023
24 Mar 2023
8 Apr 2023
25 Mar 2023
Amount
Dismantiling of mild steel work of any description not otherwise provided for completed all as specified and as directed.
S&F MS Angle/flat iron/channel framed work such as iron gate, ladder, SWT frame, grills, gratings, framed guard bards, etc., with ends of bars shouldered and/or riveted, or forged into spikes for portion framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Fixing only MS work retrieved from old dimantling complete all as specified and as directed.
S&F mild steel plates 2mm thick (plain) channels, square cut or or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachement FE-410-W (Gde-E-250) quality-A complete all as specified and as directed.
M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified.
M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.
Dismantling fencing posts or struts (steel ) any section, including taking out embedded portion and making good disturbed ground, post embedded in cement concrete/natural ground complete all as speciifed and directed.
S&F MS angle iron conforming to Fe-290 (Gde E-165 as in fencing post complete all as specified and as directed.
Excavation in post holes each n.exc 0.50 cum getting out, return, filling and removing surplus soil to a distance n.exc 50 mt and making good disturbed ground complete all as speicifed and directed.
M&L for PCC 1:2:4 type B2 (using 40 mm graded aggregate) for angle iron post complete all as specified and directed.
Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. Note: Sample shall be kept in the B/R office duly labelled and signed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.
Material & labour for MS Flat iron (for securing wire mesh etc.) including all necessary drilling. bolting or riveting, etc., and similar work conforming to Fe- 290(Gde E 165) Complete all as specified and as directed
Supply & fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10cm long and dia of neck 11 to 15 mm complete all as specified and as directed
Excavation in trenches not exceeding 1.5m in depth and getting out in hard/ dense including cutting of roots/ branches below ground level where ever required complete all as directed.
Excavating in trenches, or each additional 1.5m or part thereof in depth beyond the first 1.5 m® and getting out in any type of soil all as specified and as directed
M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 for 200mm dia drain pipe
M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 for 150mm dia drain pipe
M&L for Reinforced concrete pipes, 200mm dia class NP2, laid and jointed commplete ith collars all as specified and directed.
M&L for Reinforced concrete pipes, 150mm dia class NP3, laid and jointed complete with collars all as specified and directed.
M&L for Cutting into existing manholes for removing existing branch drain,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-I smooth finished, and reforming benching as required 200mm dia pipe all as directed.
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 150mm dia pipe all as directed.
M&L Reinforced precast cement concrete cover slabs set in CM 1:6, type B1 1:2:4 (20mm graded aggregate)as in drain covers and etc. where ever required complete ali as directed.
M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete all as specified and directed by Engineer In charge.
M&L for RCC Type B1 1:2:4 using 20mm graded aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, ramps and mass concrete complete all as directed
M&L for Formwork flat to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as directed
M&L for RCC Type B1 1:2:4 using 20mm graded aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, chajjas, canopies, deck slabs and in shelves and the like complete all as directed
M&L for Formwork flat to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick complete all as directed
M&L for RCC Type B1 1:2:4 using 20mm graded aggregate Roof Beams, cantilevers, bressummers, lintels over 1.5m span complete all as directed
M&L for Formwork flat to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, Overhangs, etc. also splays between floors and beams, etc. complete all as directed
M&L for Formwork in square, rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions complete all as directed
M&L for RCC Type B1 1:2:4 using 20mm graded aggregate Columns, pillars, piers, posts and struts complete all as directed
M&L TMT bars 10 mm dia and over ,cut to length bent to shape required incl cranking bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete.
All as per item above but 8 mm dia TMT bars.
M&L hard core of broken stone of gauge n.exc 63mm deposited spread and leveled in layers ,water and rammed true surface in plinth protection/ hard standing all as directed by Engineer-in-charge
M&L PCC 1:3:6, type C-1 (40 mm graded agg ) for plinth protection 75 mm thick, finished without using extra cement complete all as specified and as directed
M&L PCC 1:4:8, type D-2 (40 mm graded agg) for sub base of floor 75 mm thick complete all as specified and as directed
M&L PCC 1:2:4, type B1 (20 mm graded agg) for 40 mm thick in floor finished even and smooth without using extra cement complete all as specified and as directed
M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, for 200mm thk slab Grade 'A complete all as specified and as directed
M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying of floor finish complete all as specified and as directed
M&L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed
M&L Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with greyy cement and no pigment set ionted and pointed in neat cement slurry colour to match in floors complete all as specified and as directed
M&L PCC 1: 2:4 type B-1 (using 20mm graded crushed stone aggregate) laid in base, cement concrete filling mass covered complete all as specified and as directed
M&L for non skid ceramic coloured /printed tiles of area exc 0.06 sqm andn.exc 0.11 sqm, 6 to 7 mm thick, in floors etc set and jointed in neat cement slurry and pointod in coloured cement to match the tiles. (Screed bed shall be measured and paid for separately) complete all as specified and as directed
M&L for glazed ceramic coloured / printed tiles 300mmx 200mm/450x350mm, 7mm thick, as in skirting/ dado set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles. (Screed bed shall be measured and paid for separately) complete all as specified and as directed
M &L Non - skid Ceramic tiles 7 to 8 mm thick (squarel rectangular)of any colour area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors complete all as specified and as directed.
M&L Providing precast cement concretetype B1 1:2:4(20mm aggregate) in CM 1:4 in window or door cills, lintels ,bressumers, steps, quoin blocks (for use with masonry), string courses, copings.kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets,shelves etc. (of any section indicated) , with plain fair faces,including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and as directed
Removing excavated/ demolished material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point.
Returning. filling in/ filling under floors wherever required including spreading, leveling, wateringand well ramming in layers n.exc 25cm in hard/dense soil complete all as
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. all as specified and directed. .
S&F 5.5mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified
S&F Mortise lock vertical type 100mm size, 4 levers complete all as specified.
Material and labour brick work with fly ash bricks straight or curved on plan exceeding 6 M mean radius built in CM 1:4 etc Complete all as specified and as directed
M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 in internal walls finished even and smooth (with out using extra cement) all as specified & directed by the Engr-in-Charge.
M&L Rendering 5 mm thick on fair faces of brick work or concrete sufaces in CM 1:3 in ceilings finished even and smooth (vith out using extra cement) all as Specified & directed by the Engr-in-Charge.
M&L for 15 mm thick rendering in CM (1:4) on external suriaces finished even and smooth without using extra cement and using WPC all as specified directed. (Note: WPC shall be measured and paid seperately under relevant tem)
Supply only integral water proofing compound
M&L dismantling Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars completed all as specified and as directed
Material & labour walling of random rubble masonry uncoursed, Secunderabad type well bonded, bedded and solidly hearted in cement mortar 1:6 etc completed all as specified and as directed
All as per item above but except stones (serviceable stone obtained from dismantling shall be made use of under this item) completed all as specified and as directed
Material and labour PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in copings completed all as specified and as directed
M&L for Flush pointing to block in course or ashlar masonry or concrete block waling in 10 Sqm cement mortar 1:4 completed all as specified and as directed
S & F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 90mm to 110mm spacing and straing and fixing to any type of standard rails straining bolts, incluing securing or typing a crossings with an provision of galvanize mild steel wire, staples or steel pins, etc all as directed (each line wire to be measured) in repairs completed all as specified and as directed
S&F in repairs Concertina coils super barbed bladed profile of dia 600 mm of and wt of coil for 50 spiral turns shall not be less than 9.0 kg and one coil (50 spiral) shall not be stretched to more than 6.0 mt. blade shall be 0.50mm th galvanised steel strip and 2.5mm dia core wire fixed to angle iron brackets or masonry surfaces with necessary accessories like straining wires, fixing clips etc complete all as specified and as directed by Engineer-in-charge
Material and labour for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by the Engineer-in-Charge.
Supply and fix factory made 35 mm thick second class hard wood plain framed paneled shutters (one panel) without interlocking rail & panel of 9 mm BWP commercial ply or 12 mm veneered particle board for others with commericial veneering on both faces and size of members of door shutters as per IS :1003(part I ) as specified in SSR part section 3 clause 8.20 (a) fitted to chowkats, kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge
Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 30 mm thick factory made PVC rigid frame panel door shutter made from MS tubular frame of gauge 19 x 19 mm style and 15 mm x 15 mm top and bottom rails MS frame to be covered with 5 mm thick heat moulded PVC 'C' channel of size 50mmx 30mm for stiles with 5mm thick PVC sheet (50 mm wide for top rail, 75 mm wide tor lock rail and bottom rail on either side). Paneling of 5 mm thick PVC sheet to be fitted in the MS frame, sealed to the styles and rails with 25 mm thick PVC sheet beading on either side and joined together with cement solvent adhesive complete all as specified and as directed by the Engineer-in-Charge
S&F 100 mm long mild steel butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge
Suppy and fix factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded ventilator with top hung shutter including hinges, steel peg stay, complete all as specified
S &F Pressed steel frames of size 125mmx60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed
Material and labour salt glazed stone ware drain pipes grade 'A' laid in trenches and jointed with cement mortar 200 mm bore of pipe complete all as specified and as directed
Material and labour cement concrete bed in 1:3:6 type C2 (Using 40 mm graded stone aggregate) to drain pipe including packing under and haunching against the sides of the pipe after they are laid and tested for the 200 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) 'S' trap 125/110mm dia bore in repairs for WC Connector or where ever required complete all as specified and directed by Engineer-ln-Charge
M&L PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls including all fitting & fextures complete all as directed.
Supply and fix vitreous china wash down water closet pan (Pedestal type), whitel Each coloured with PVC seat covers including removing the existing one complete and making good all connections as in repairs all as specified and directed. Cat No. 20044, Make: Hindware
M&L for applying two coats of oil bound distemper on new surfaces of walls over a coat of primer complete all as specified and as directed by Engineer-In-Charge.
All as per item No above but on Ceiling.
M&L for preparing of new surfaces and applying two coats of cement based paint on walls and ceilings all as specified & directed by the Engr-in-Charge.
S&F Sheet glass assembely consisting of 5.5 mm thick sheet glass shelf 12 cm wide with Each chromium plated bracket guard and railing 60cm long above WHB.
S&F 20 mm dia tubular towel rail brass cromium plated, D type, 60cm long between Each flanges complete all as directed. Cat No. F450024, Make: Hindware or equivalent
S&F stop valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed., Make: Hindware
S&F Two way taps 15 mm bore fancy type, chromium plated, screwed down, high pressure With crutch screwed both ends for iron pipe or for unions all as specified and directed. Make: Hindware or equivalent
S&F Health faucet 15 mm bore fancy type, chromium plated, inlucding pipe handle and all connected fittings, high pressure with crutch screwed both ends for iron pipe or foor unions all as specified and directed. Make: Hindware or equivalent
Supply and fix 15 mm bore bib tap brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe fixed Complete all as directed. Cat No. F330011 Make: Hindware or equivalent
Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe complete all as specified and directed.Make: Hindware, Sleek essence single flush, Star VWhite or equivalent
Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as specified and directed.
All as per item above but 60 cm long.
S&F Vitreous China urinals, half stall bowl type (back or corner wall type), completeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) all as specified and directed.
S &F Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line complete all as specified and directed.
S&F Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, but suitable for urinals, (Minimum weight15mm-50gms) all as specified and directed.
M&L PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.
Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors in repairs including concealed piping afier cutting in brick work/ stone masonry walls where ever required complete all as specified and directed.
All as per item above. but 20mm dia
S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical Each shape with vertical top closed) hoisted and fixed in position all as specified and directed.
S&F in 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm- 142gms/20mm-210gms) all as specified and directed.
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.
Supply and fix vitreous china ware wash hand basin 550mm x 400 mm size flat back or angle with new bracket and all connections. Cat No. 10010 Ped 11027, Washbasin Starwhite, Make: Hindware or equivalent
Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fiy nuts flange and bedded in run lead cement and other end fixed including taking down the unserviceable waste fitting Complete
Supply and fix 15mm bore pillar taps CP brass chromium plated screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as dircted by the Engr-in-Charge.Cat No. F200001 Make: Hindware or equivalent
S&F Steel work as in tubuiar trusses, stanchions including special shaped washers etc complete using ERW or inducticn butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified.
S&F pre-painted galvalume aluminium zinc coated GI based corrugated sheet complete all as specified.
S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensiie strength of 550 Mpa as in roof covering fixed with seir tapping screws complete all as specified.
M &L rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement all as specified and directed.
Mild steel TMT bars of any dia as in stirrups cut to length, bent to shape requiredincl crencking bendding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips
M&L for 100 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) laid in floor sub base cement concrete surface even and smooth without using extra cement.
M& L Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M & L preparing new surfaces, including cornices and applying three coat of white wash on celling all as speicified and directed.
M & L preparing old surfaces, including cornices and applying three coat of white wash on wall all as speicified and directed.
M&L for Applying 3mm thick wall care putty on wall surfaces complete smooth finishing, rubbing with paper in two layers each n.exc 2mm thick complete all as specified and as directed
M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying one coats of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.
S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) Fe 410 -W (Gde- E- 250) quality- A and hanging; also fastening and fixing complete all as specified and directed.
S&F Mild Steel Ventilators with top hung shutter including hinges,steel peg stay complete all as specified and as directed by the Engineer-in-Charge.
Supply and fix sheet glass, ordinary quality black /white , 4 mm thick, in squares not exc 0.50 Sqm in each pane and glazing with oil putty complete all as specified and as directed by the Engineer-in-Charge.
M&L for Earth work excavation in trenches for sewage lines work in hard rock/road cutting including hard bed where ever required complete all as directed.
M&L for Taking down sewage lines where ever required (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc.,(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
M&L for Cement concrete type B2 1:2:4 (using 40mm grtaded aggregate) in foundations, filling and mass concrete and under road cuttings and where ever required including finishing smooth surface and match with the road surface complete all as directed
M&L for Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.
M&L for Pre-cast cement concrete block type B1 (1:2:4 )masonry set in CM 1:4 with solid blocks, exc. 10 cm in width andsetting in mortar,complete
M & L Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping including necessary form work complete all as directed
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopper ends etc all as specified and directed.
M&L PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls, at septic tanks including all fitting & fextures complete all as directed.
M & L PVC (SWR) Gully trap 125/110mm, setting and joining with solvent cement Complete all as specified and directed.
S &F75mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.
Construction of septic tank to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M- 25 baffle wall, PCC block masonry, RCC slab vent, vent shaft, connection etc., complete for 10 user as per drawing No. CWE/AF/TD/143/12 Sht No. 1/1, 2/2 dt 09.12.2022.
Soakage wells of size1.2 M dia X 1.5 M effective depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size all as specified and directed. As per drawing No. CWE/AF/TD/140/09 Sht No. 1/1, dt 17.07.2009.
M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through new concealed PVC conduit of suitable size but not less than 20 mm dia in surface of stone/concrete wall /roof etc all as per site requirement including concealed PVC conduit all as per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes made out of 1.6 mm thick MS sheet box 60mm deep covered with 3mm thick laminated hylam sheet fixed with cadmium plated screws for mounting switches,sockets,fan regulator etc including required tees, bends etc. and making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge. Note :-Making good the disturbed surface and matching with the existing surface with the help of distempering and other items. Rate of the cost of making goods deemed to be included in the unit quoted rate.
a) One light /bell /Exhaust fan/Fan Point controlled by one switch
b) One 3 pin 6 Amps socket point controlled by one switch on same board
c) One 3 pin 6 Amps socket point controlled by one switch on independent board
Supply and fix switch piano flush type 5 Amps, one way
Supply and fix Switch socket combination 2 in 1, 3 pin, 5 Amps flush type universal
Supply & Fix stepped type electronic fan regulator flush type
All as per ser item here-in-before but for one 15/16 Amps switch socket combination on independent board with 2.5 sqmm cables for phase and neutral and 2.5 sqmm cable green in colour as earth continuity conductor.
Supply and fix Ceiling rose, 3 terminal, PVC/ polycarbonate insulated body
Supply and fix Switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal
Supply & fixing wall mounted LED batten fittings extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 22W LED (4ft) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete including taking down old U/s fittings all as specified and directed by Engineer-in-Charge.
Supply and fix in repair LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant with driver and lamp. complete all as specified and directed by Engineer-in-Charge.
M&L in replacement of GI Pipe Bracket made out of Galvanised Iron Tubing 40mm bore (dia), light grade, 1.50 Metre long bent to shape as per specified for fixing Security Light Fitting including suitable size of clamps and applying Two coats of Aluminium Paint over a coat of Aluminium Primer including taking down old unserviceable GI Pipe Bracket with clamps, complete all as specified and as directed.
Supply and fix wall mounted fan with 230mm sweep, single phase, 230 volts, 50 Hz. Including making necessary arrangement of hole and fixing with clamp all specified and directed by Engr- in-Charge.
Supply and fix wall ceiling fan with 1200mm sweep, single phase, 230 volts, 50 Hz. Including making necessary arrangement of hanging hook and all specified and directed by engr in charge.
Supply and fix exhaust fan with metal body, 300 mm sweep, single phase, 230 volts, 50 Hz. Including making necessary arrangement for fixing with clamp all specified and directed by engr in charge.
M&L cutting existing steel tubing of size 50mm bore for alterations or additions done in position without taking down
Screwing existing steel tubing of size 50mm bore for alterations or additions (or lengthening screw on pipe to form connector) done in position without taking down
S&F GI pipe “Medium class”, supplied and laid complete including fittings 50 mm dia complete all as specified and as directed.
S&F GI pipes “Medium class”, supplied and laid complete including fittings 25 mm dia complete all as specified and directed.
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 25mm bore and fixed complete.
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 50mm bore and fixed complete.
Construction of valve chamber of size 450mm x 450mm x 700mm in 200mm thick Brick walls with sub class 'B' brick built in CM 1:4, rendering 10mm thick cement plaster on fair faces of brick work finished even and smooth (with out using extra cement) and providing 3mm thick MS plate hinged cover fixed to 25mmx25mmx3mm thick angle iron frame work on brick work chamber with locking arrangement including necessary earth work, excavation, PCC bedding & coping, applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and two coats of white wash on brick wall surfaces complete.
Boaring/ drilling (horizontally ) of holes under road, pavement, hard standing by trenchless technology suitable for passing GI/HDPE pipe 80mm dia all as specified and directed by Engineer in charge.
Supply and spread clean dry river sand in trenches for cushioning of cable complete all as specified and directed by Engineer-in-Charge. (Note: Punned down thickness only shall be measured for the purpose of payment)
Supply and laying sub class 'B' bricks laid dry and flat size 230 mm x 115mm x 75 mm across the length of cable for protection of cable complete all as specified and directed.
Material and labour for 80mm dia bore tubes, 'light grade' galvanised, with all fitting and fixed complete to walls/ poles or laid in trenches/ floors for cable protection complete all as specified and directed by Engineer-in-Charge. (Make: Jindal/TATA/Zenith)
Supply & fixing in replacement of LT underground cable of size 3.5 Core, 50 Sqmm in trenches or fixed on pole/wall or drawn through pipes including suitable size Lugs & Glands etc complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement of LT underground cable of size 4 Core, 16 Sqmm in trenches or fixed on pole/wall or drawn through pipes including suitable size Lugs & Glands etc complete all as specified and directed by Engineer-in-Charge.
M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead strip 32x6 mm size by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 5 of SSR part I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to LT panel board as indicated including testing complete all as specified and as directed.
Material and Labour painting with two coats of enamel paint Surfaces of any description of approved colour over one coat of red oxide metal primer after scraping thoroughly the existing corroded metal surface of the LT panel at installed position all as directed by Engineer-in-Charge.
M&L for submain wiring alongwith earth wire with 4 x 10.0 Sqmm + 2 x 10.0 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including new PVC Conduit in wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: six runs of 10.0 Sqmm copper cable shall be measured as one unit length.
Supply and fix distribution board double door type(for incoming MCCB & outgoing MCBs) TPN 4 way vertical type sheet steel powder painted with bus bar ,neutral link & earth bar etc. flushing in wall including fixing only of outgoing MCBs of various rating complete all as specified and directed by Engineer-in-Charge.
Supply and fix distribution board single door type (for incoming & outgoing MCBs) SPN 4 way vertical type sheet steel powder painted with neutral link & earth bar etc. flushing in wall including fixing only complete all as specified and directed by Engineer-in-Charge.
S&F Isolator Triple pole and Neutral (TPN) of capacity 100 Amps 415 volts ,breaking capacity 10 KA,'C' series ,fixed in proper position all as directed by the Engineer in charge .
S&F Isolator Triple pole and Neutral (TPN) of capacity 40 Amps 415 volts ,breaking capacity 10 KA,'C' series ,fixed in proper position all as directed by the Engineer in charge .
Supply and fix MCB, SPN, 30-63 Amps, 230 Volts
Supply and fix MCB, SP, 6-32 Amps, 230 Volts
M&L point wiring using approved colour coading as per IS with copper cable FRLS 1.5 sqmm (nominal area) single core insulated and unsheathed stranded cable 1100 volts grade and including (ERW) stove enamelled steel surface/concealed conduit (as per site condition) heavy duty ISI marked and unsheathed copper conductor FRLS 1.5 sqmm nominal area as earth wire as earth continuity conductor complete all as specified and directed by Engr-in-charge.
Supply and fixing LED light fitting 2X16 Watt flameproof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.
S&F switch flame proof rotary type with termination box in LM6 16A single pole 250 V, complete all as specified and directed by Engr-in-charge
Supply and fix Sheet metal enclosure MCB DB SPN 04 way with 200 amps Busbar 240 volts double door withflush type system complete all as specified
Supply and fix MCB SPN 40 Amps suitable for fixing in MCB DB
Supply and fix MCB SP 6-32 Amps Suitable for fixing in MCB DB
Supply and fix Flame proof Exhaust fan single phase of size (12"), SP, 0.25 HP, 1440 RPM, 230 volts single phase AC supply, with louvers complete with ,bolt,nuts,and washers,suitably embeded in the wall including making suitable opening and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to exhaust fan for giving connection complete all as specified and directed Engineer-in-charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core
Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure.
Supply & fix GI pipe light grade 40mm dia for cable protection including all fittings, fixed in poles/walls floors etc.
M & L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.
Material and Labour for earthing pit display boards made out of 3mm thick MS sheet of size 30 x 35cm welded to 75cm long 25 x 25 x 5 mm thick MS angle iron grouted in PCC 1:3:6(with 20mm stone aggregate) to a depth of 20 cm and applying two coats of synthetic enamel paint of approved color over a coat of red oxide primer and writing the letters on plate for showing the following details: 1. EARTHING PIT NO. : 2. DATE OF MEASUREMENT : 3. NEXT DUE DATE : 4. STANDARD VALUE : 5. VALUE OBTAINED : 6. MEASURED BY : 7. SUPERVISED BY :
Supply & fix single pointed air termination Aluminium rod, 12 mm dia, 300 mm long complete all as specified and directed.
S & F aluminum strip 25x 3 mm complete with saddles and fixing screws for fitting the strip complete all as specified and directed.
M & L test point terminal block made of gun metal or phosphorus bronze size 75X75X25 mm drilled and screwed including 3 no's 8 mm dia 25 mm long hex. head screw complete all as specified and directed.
S & F GI Tubing 32 mm dia, light grade with all fittings including fixing arrangement with screws, clamps complete all as specified and directed.
M & L for PCC Block 1x 1x2 Ft by using 20 mm graded aggregate for fixing of GI pipe 50 mm bore complete all as specified and directed.
M & L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.
M/s D.Krishna Varma
Saiansh Associates
SRI LALITHA CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .