REPAIR / MAINT TO SANITARY FITTINGS, PLUMBING, FLOORING, PLINTH PROTECTION, JOINERY, ROOF TREATMEN, PERIODICALS AND CONNECTED ITEMS IN ZONE-IIB AREA UNDER AGE B/R-II OF GE JAIPUR

Amount

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L glazed coloured ceramic tiles 50x 250x 7 mm/ 450X 350X 7mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

M&L joint free non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L ultracharge virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L ultracharge virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as on vertical surfaces of wall such as dado, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S & F in repair 15mm bore GI tubing medium grade with all necessary fitting, fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed

S & F in repair 20mm bore GI tubing medium grade with all necessary fitting, fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed

S & F in repair 25mm bore GI tubing medium grade with all necessary fitting, fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed

S&F in repair 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repair vitreous china wash hand basin, white, flat back, size 450x300mm including brackets with PVC waste pipe, brass chromium plated waste coupling, basins etc with long screw shank and fly nuts flanged incl fixing only of pillar taps and bedded in red lead in cement and other end fixed, complete all as specified

S&F in repair 32mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) complete all as specified and directed

Supply only 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and directed

S&F in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch as butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and including waste pipe) complete all as specified and directed.

S&F in repair 32mm bore Waste coupling of PTMT (half or full threaded) suitable for urinals (Minimum weight 32mm-45gms) complete all as specified and directed.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F in repair vitreous china urinal partition white of size 310x700 mm urinal partitions slabs terminating about 40cm above floor line, fixed in repairs complete all as specified and directed.

M & L for WPT in sunken floors as described here under:- (i) Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 3 mm thick and weighing not less than 3.0 kg/ sqm as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm, torching overlaps with a propane or a butane gas torch, with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface and filling lime concrete 1:5:10 type E2 using brick bats, including demolition existing sunken treatment complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately Note : Slab area only will be measured for payment purpose.

S&F in repair vitreous china squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern, pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete but including trap set in concrete incl seat and cover for pedestal pan, flush pipes to pedestal pan, including all joints complete all as specified & directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete incl seat and cover for pedestal pan including trap set in and including concrete complete all as specified & directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level or high level 10 ltr capacity, white, with intel, ball valve, float and handle including brackets, flushing pipe complete all as specified & directed.

S&F in repair SS grating 125mm dia with or without waste hole complete all as specified and directed.

S&F in repair 15mm bore chromium plated, two way Bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or brass ferrule complete all as specified and directed.

S&F as in repair 15mm bore bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Taking down eaves gutters,sanitry PVC pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 110mm PVC (SWR) pipes double socketed, in any length with rubber ring joints fixed to wall with and incl suitable SS clamp complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes, single socketed in length with rubber ring joints fixed to wall with and incl suitable SS clamp complete all as specified and as directed.

S&F 75 mm PVC (SWR) pipes double socketed, in any length with rubber ring joints laid in trenches or in floors with and incl suitable SS clamp complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single (Single Tee) with access door equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR), junction single (Single T) equal or unequal with access door complete all as specified and directed.

S&F 110 mm PVC (SWR) branch piece,double (double Y) equal or unequal complete all as specified and directed.

S&F in repair 75mm diameter outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part including dismantling of old tank

S & F in repair 15mm bore wall mixer, brass, chromium plated, fancy type for mixing hot & cold water, with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down shutters of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S&F 30mm thick factory made flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F framed work as in doors or gates other places with angle, tee, channel or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and pintal hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe-290 Gde-E-165 complete all as specified and directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing given in SSR Part-I complete all as directed and specified.

S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash bars any numbers , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- S & F Glass/gauge shall be measured and paid for separately

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed to wodden door shutters and fixed with stainless steel wire staples complete all as specified and directed.

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with and incl EPDM gasket in Aluminium/ uPVC window/ventilator in square n exc 0.5 sq. m in each pane complete all as directed and specified.

M&L for running welding in repairs thickness of metal to be welded n exc 6mm thick incl cleaning and preparing the surfaces to be welded together complete all as directed and specified.

M&L for powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as directed and specified.

M&L for Anodised aluminium for powder coating of any colour (Thickness or powder coating not less than 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples in window and door either via welding or any means as specified and directed by engg-in-charge.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as directed and specified.

Distmantling of ceiling boards (fibre, pulp, insulation etc.) or insulation bords/ slab/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L anodized aluminium snap grid frame work of size 605 x 605 mm for false ceiling complete all as directed and specified.

M&L for 8mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/aluminium frame work with screws in ceiling complete all as directed and specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Taking down wall panelling and smilar work complete all as directed and specified.

Supply and fix Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing ,complete all as specification all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing in SSR complete all as directed and specified.

S & F 18 mm thick HDHMR (High density high moisture resistant) board one side white laminate and other side decorative as in modular kitchen/ cabinets/door shutter fixed with and incl minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of pearlwood or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer,fixed to wall etc complete all as directed

S & F stainless steel Auto clove hinge fancy type of approved make complete all as specified & directed.

S&F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick, 18 guage of Grade SS-304, kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F for 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F for 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F in repair for 100mm width of recess between flanges (when open) parliament hinges, cast brass, bright polished and fixed complete all as specified and directed.

S&F in repair for 30mm width of flaps (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repair for 100mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and directed.

S&F in repair for 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F brass mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified fixed

S&F in repair mild steel Hat pegs, solid body, 125mm to 175 mm complete all as specified and as directed.

S&F in repair 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed complete all as specified and as directed.

S&F in repair Door closer aluminium anodized extruded section body hydraulically regulated designation No-3 universal type suitable for door shutter of 700mm in width and of weight not more than 35 kg complete all as specified and as directed by Engineer in Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, ceiling incl raking out joints hacking for key scrubbing down with water and removal of rubbish off outside complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

S&F in repair 25 mm dia SS drapery rod grade 304 medium weight incl taking down old one with finials, brackets etc complete all as specified and directed

S&F SS Finials suitable for 25mm dia SS 304 grade drapery rod as approved complete all as specified and directed.

S&F SS -304 grade brackets/ end brackets for holding drapery rod complete all as specified and directed.

M & L for preparation of new plastered wall surfaces and applying two coat of oil bound distemper (Ist quality) of approved tint over and including priming plastered surfaces with alkali resistant priming paint complete all as specified and directed .

M&L for removing of air blockage or air locking in existing water pipe line of any dia through manual or pressure motor or any other means complete all as specified and directed.

Taking down existing roof treatment complete including demolition of PCC, Mud phuskas, lime concrete etc any description upto mother slab, and properly cleaning the surface to remove loose particles with wire brushes and removing the debris out side of MoD land complete all as specified and as directed by Eng- In-Charge.

M&L screed plaster 15mm thick in cement mortar (1:4) on concrete surfaces of roof to receive water proofing treatment and finished the surface even and smooth without using extra cement etc incl mixing of WPC as per manufacturers instruction complete all as specified and directed. Note:- Integral water proofing compound paid seperately as supply only

Supply only Integral water proofing compound ISI marked complete all as specified and directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) finished even & smooth without using extra cement to cover negative slope into prop complete all as specified and directed

M & L For The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS: 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric (weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions. and finally applying one coat of bitumen @ 1.2 kg/sqm on APP membrane including two coats of aluminium paint complete all as specified and directed by Engr-in-Charge. Note: roof treatment to be done through authorised applicator only

M&L for disconnecting existing tanks having capacity exc500 & nexc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. Note : Cleaning repairing, etc. measured separately

M&L for cleaning and removing all scale and dirt, etc, from tanks having capacity exc500 & n exc 1000 ltrs and from mouths of circulating pipes etc. complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in plinth protections, finished even and fair with joints 10 mm wide and in full depth at corners and @ 3m c/c filled with mastic mortar including necessary formwork complete all as specified and directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

S.R.Enterprises (BID ID -3102416)

M/S JALANDRA CONSTRUCTIONS (BID ID -3100424)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3101407)

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3097430)