ADDN/ALTN AND SPECIAL REPAIR TO PARAPET/CHAJJAS IN MD OFFICERS ACCN AT SHANKAR VIHAR AND 03 NOs MINOR WORKS UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10

Amount

Demolition of reinforcement cement concrete of any discription and in any position including cutting of reinforcement from adjoining RCC component to faciliate demolition including removal of demolished concrete from site outside MoD land complete all as specified and as directed. Note:- All scaffolding & T&P up to three storey building required for demolition/dismantling of RCC shall be part of this item . All Demolished concrete/malba shall be removed same day after cutting of reinforcement from each & every block and same shall be shift from outside cantonment area as directed by Engr in charge and specified complete.

Demolition of cement concrete (unreiforced) of any description and in any position including removal of debrish out of MoD Land all as specified and directed (up to 2 or more story Building) complete all as specified and as directed.

M&L for brick work using sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M&L for Brick work with sub class "B" bricks, straight or curved on in half brick thick wall built in cement mortar (1:4), (up to two story bldgs) complete all as specified and as directed.

M&L for Reinforced cement concrete 1:2:4 (nominal mix) in type B-1, using 20 mm graded stone aggregate as in fins, fascias, slab, louvres, parapets, and railings in height, newels, balustrade, and the like upto three storey building complete all as specified and as directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F 8mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and as directed.

M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc., vertical or to better, upto two storey complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Dismantling of brick tiles (laid flat or on edge) on roof surface laid bedded and pointed in any mortar complete and Cutting or uprooting grass/shrubs/sappling etc on old mud phuska, removing rubbish off the premises complete all as specified and as directed.

Demolition of mud in roof in, any thickness, including plastering and leeping upto two storey bldg incl necessary scaffolding arrangement complete all as specified and directed (whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as specified and as directed.

M&L for Providing cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-0, using 12.5 mm graded stone aggregate with water proofing compund @ 3% of cement, as in roof, padding to maintain the uniform slope or to filling the depression in patches complete all as specified and as directed.

Supply only water proofing compound. (ISI Marked. Siko or equivalent)

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for Dubbing out average 20 mm thick on irregular face of walls/ Ceiling in cement mortor 1:4 complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4 upto 2 story building , to be finished even and fair complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1:3 on ceiling and finished fair even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall/ceiling and applying two coats of weather coat exterior grade over and incl wall care putty to make smooth surface including scaffolding arrangement, trestles, ladders etc upto two storey complete all as specified and as directed.

M&L for complete removal of existing treatment of walls/ceiling by electrical grinder/sand paper/steel patti thereafter prepartion of walls by filling of holes and cracks with cement mortar CM 1:4 and applying two coats of exterior emulsion paint over a coat of External wall care Putty specified for external surface as per manufacturer instruction complete all as specified and as directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down conrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layess of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thirteen) auth cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper gerometrics in cement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs complete all as specified and as directed.

Note:- Steel welded mesh is to be tightening /welding with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted.

Taking down eves gutter/rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc incl cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed.

S&F 110 mm uPVC pipes Type 'A' (for rain water), single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110 mm uPVC (SWR) Bends/ Tees/ Tapers (any radius), with or without oval access door as required complete all as specified and as directed.

Dismantling of water tanks of any type/pattern n.exc 1000 ltr and removing from site of work, complete all as specified and as directed.

M&L for rotational moulded polythylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut , tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and as directed.

Dismantling of water tanks of any type/pattern not exc 500 ltr and removing from site of work, complete all as specified and as directed.

M&L for rotational moulded polythylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut, tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and as directed.

Disconnecting existing tanks of capacity 500 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting at other place as directed and reconnecting, repair if required and re-fixing in position complete all as specified and as directed.

Disconnecting existing tanks of 1000 liter, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting at other place as directed and reconnecting, repair if required and re-fixing in position complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F 15mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

S&F 20mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

Fixing only 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed complete all as specified and as directed.

Fixing only 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting in roof covering (any shape and size), cleaning and making it good for refixng or removing it to store as per condition of sheet complete all as specified and as directed.

Fixing only for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet or any sheet with any thickness as in roof covering fixed with and including self tapping screws complete all as specified and as directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Cutting of sapling/bushes including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified and as directed.

Cutting holes in brick walls in built in cement mortar or cement lime mortar exc half brick but not exc one brick complete alll as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges or landings, steps, cills, sunshades, shelves, lintel, etc. and cutting in chases for concealed conduit wiring, etc and making good, cutting n.exc 10 cm girth complete all as specified and as directed.

M&L for steel work in tubuler trusses including special shaped washer, cleats etc complete using ERW or induction butt welded tubes confirming to IS : 1161-1979 grade st - 240 complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide , zinc chrome primer including preparation of new steel surfaces of any description, not it herwise described, over 10 cm width or girth complete all as specified and as directed.

M&L for 18 mm thick wood plastic composites (WPC) board, 100% solid, one side wood grain finished laminated for exposed/external surface, fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and as directed. Notes:- (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid in extra.

S&F Continuous (piano) hinges width of flap 30 mm, mild steel, bright finish or electrogalvanised fixed to steel chowkhat with welding or with screws complete all as specified and as directed.

S&F stainless steel AISI 304 grade handle of size 100 mm long, etc. complete all as specified and as directed.

S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

POONAM ENTERPRISES

P R Constructions