Coal India

Financial BO

Works

Civil Works - Roads

Re-carpeting of Bituminous road at SBS colony under CWS-CS Korba.

South Eastern Coalfields Limited

SECL, CWS-CS | Korba, Chhattisgarh

Amount: ₹1.1 CrCloses: 13 Mar 2026Closed

Timeline

Published26 Feb 2026
Closed13 Mar 2026
Technical Evaluation29 May 2026
Financial Evaluation30 May 2026
Award—

Bids

Item Rate

3 Bids30 May 2026

#	Company	Amount	Rank	Status
1	DWABA CONSTRUCTION L1₹81.7 LAdmitted-Finance	₹81.7 L	L1	Admitted-Finance
2	Anmol Infrastructure L2₹1.3 Cr+₹47.6 L (58.3%)Admitted-Finance	₹1.3 Cr+₹47.6 L (58.3%)	L2	Admitted-Finance
3	BHAAVINI INFRATECH Rejected-Technical 154 INDIRA COMPLEX T P NAGAR KORBA CG 495447 \| KORBA \| KORBA \| CHHATTISGARH \| 495447	-	-	Rejected-Technical Not as per requirement of NIT

BoQ Comparative

Line Items (6)

Sl No	Description	Qty	Unit	DWABA CONSTRUCTION L1	Anmol Infrastructure L2
1.00Item Description/ Heading
1.01	Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. 0.30 kg per sqm (dry & hungry bituminous surfaces/granular surfaces treated with primer)	14,248.43	sqm	10 ₹1,42,484.3 Lowest	23 ₹3,27,713.89
1.02	Providing and laying bituminous macadam with 100-120TPH hot mix plant producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction	854.91	cum	4,200 ₹35,90,622 Lowest	6,000 ₹51,29,460
1.03	Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications.. @ 0.25 kg per sqm (normal bituminous surfaces)	14,248.43	sqm	9 ₹1,28,235.87 Lowest	19 ₹2,70,720.17
1.04	Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 507 of specification.a) Using Batch Mix Plant of appropriate capacity and Paver Finisher Hydraustatic with Sensor control. (iv) for Grading-II (30-45 mm thickness ) with 60/70 bitumen(VG-30	569.94	cum	4,900 ₹27,92,706 Lowest	8,000 ₹45,59,520
1.05	Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.	1,329.39	Sqm	200 ₹2,65,878 Lowest	500 ₹6,64,695
1.06	Total impact of GST for the purpose of CTC	1	Nos	12,45,586.71 ₹12,45,586.71 Lowest	19,71,379.63 ₹19,71,379.63

Tender Value

₹1.1 Cr

EMD Value

₹1.3 L

Closing Date

13 Mar 2026, 5:00 pmClosed

Tender Inviting Organisation

Name

INCHARGE (CIVIL), CWS-CS, KORBA

Address

OFFICE OF THE INCHARGE (CIVIL), CWS-CS, KORBA

Work Description

Re-carpeting of Bituminous road at SBS colony under CWS-CS Korba.

Tender Information

Tender ID

2026_SECL_354701_1

Reference Number

SECL/CWS/KB/SO(C)/ET/25-26/16 DTD.26.02.2026

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Item Rate

Period of Work

30 days

Location

SECL, CWS-CS

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer tender document

Documents Required

5 documents required · 5 mandatory

Fee/PreQual/Technical

RequiredWork experience (Ref. Clause No. 8(A) of NIT) (.pdf)

RequiredFinancial Turnover (Ref. Clause No. 8(B) of NIT) (.pdf)

RequiredDigital Signature Certificate (DSC) (.pdf)

RequiredUndertaking Annexure XV (.pdf)

Finance

RequiredPrice bid (.xls)

Fee & Financial Details

EMD Fee Amount

₹1.3 L

Important Dates

Last Activity

30 May 2026

Published

26 Feb 2026

Bid Opening

14 Mar 2026

Download Starts

27 Feb 2026

Download Ends

13 Mar 2026

Submission Starts

27 Feb 2026

Clarification Period

27 Feb 2026 - 7 Mar 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (6 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Item Description/ Heading
1.01	Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. 0.30 kg per sqm (dry & hungry bituminous surfaces/granular surfaces treated with primer)	14,248.43	sqm	12.6	₹1,79,530.22
1.02	Providing and laying bituminous macadam with 100-120TPH hot mix plant producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction	854.91	cum	5,157.6	₹44,09,283.82
1.03	Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications.. @ 0.25 kg per sqm (normal bituminous surfaces)	14,248.43	sqm	10.75	₹1,53,170.62
1.04	Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 507 of specification.a) Using Batch Mix Plant of appropriate capacity and Paver Finisher Hydraustatic with Sensor control. (iv) for Grading-II (30-45 mm thickness ) with 60/70 bitumen(VG-30	569.94	cum	7,002.7	₹39,91,118.84
1.05	Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.	1,329.39	Sqm	224.5	₹2,98,448.06
1.06	Total impact of GST for the purpose of CTC	1	Nos	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.05 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.06 MB

Tendernotice_2.pdf

PDF • 0.84 MB

Tendernotice_3.pdf

PDF • 0.42 MB

Work Item Documents

BOQ_367529.xls

BOQ • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

DWABA CONSTRUCTION

L1₹81.7 LAdmitted-Finance

Anmol Infrastructure

L2₹1.3 Cr+₹47.6 L (58.3%)Admitted-Finance

BHAAVINI INFRATECH

Rejected-Technical

154 INDIRA COMPLEX T P NAGAR KORBA CG 495447 | KORBA | KORBA | CHHATTISGARH | 495447

Sl No	Description	Qty	Unit	DWABA CONSTRUCTION L1	Anmol Infrastructure L2
1.00Item Description/ Heading
1.01	Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. 0.30 kg per sqm (dry & hungry bituminous surfaces/granular surfaces treated with primer)	14,248.43	sqm	10 ₹1,42,484.3 Lowest	23 ₹3,27,713.89
1.02	Providing and laying bituminous macadam with 100-120TPH hot mix plant producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction	854.91	cum	4,200 ₹35,90,622 Lowest	6,000 ₹51,29,460
1.03	Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications.. @ 0.25 kg per sqm (normal bituminous surfaces)	14,248.43	sqm	9 ₹1,28,235.87 Lowest	19 ₹2,70,720.17
1.04	Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 507 of specification.a) Using Batch Mix Plant of appropriate capacity and Paver Finisher Hydraustatic with Sensor control. (iv) for Grading-II (30-45 mm thickness ) with 60/70 bitumen(VG-30	569.94	cum	4,900 ₹27,92,706 Lowest	8,000 ₹45,59,520
1.05	Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.	1,329.39	Sqm	200 ₹2,65,878 Lowest	500 ₹6,64,695
1.06	Total impact of GST for the purpose of CTC	1	Nos	12,45,586.71 ₹12,45,586.71 Lowest	19,71,379.63 ₹19,71,379.63

Sl No

Description

Qty

Unit

DWABA CONSTRUCTION

Anmol Infrastructure

1.00Item Description/ Heading

1.01

Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. 0.30 kg per sqm (dry & hungry bituminous surfaces/granular surfaces treated with primer)

14,248.43

sqm

₹1,42,484.3

Lowest

₹3,27,713.89

1.02

Providing and laying bituminous macadam with 100-120TPH hot mix plant producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction

854.91

cum

4,200

₹35,90,622

Lowest

6,000

₹51,29,460

1.03

14,248.43

sqm

₹1,28,235.87

Lowest

₹2,70,720.17

1.04

Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 507 of specification.a) Using Batch Mix Plant of appropriate capacity and Paver Finisher Hydraustatic with Sensor control. (iv) for Grading-II (30-45 mm thickness ) with 60/70 bitumen(VG-30

569.94

cum

4,900

₹27,92,706

Lowest

8,000

₹45,59,520

1.05

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

1,329.39

Sqm

200

₹2,65,878

Lowest

500

₹6,64,695

1.06

Total impact of GST for the purpose of CTC

Nos

12,45,586.71

₹12,45,586.71

Lowest

19,71,379.63

₹19,71,379.63

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Item Description/ Heading
1.01	Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. 0.30 kg per sqm (dry & hungry bituminous surfaces/granular surfaces treated with primer)	14,248.43	sqm	12.6	₹1,79,530.22
1.02	Providing and laying bituminous macadam with 100-120TPH hot mix plant producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction	854.91	cum	5,157.6	₹44,09,283.82
1.03	Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications.. @ 0.25 kg per sqm (normal bituminous surfaces)	14,248.43	sqm	10.75	₹1,53,170.62
1.04	Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 507 of specification.a) Using Batch Mix Plant of appropriate capacity and Paver Finisher Hydraustatic with Sensor control. (iv) for Grading-II (30-45 mm thickness ) with 60/70 bitumen(VG-30	569.94	cum	7,002.7	₹39,91,118.84
1.05	Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.	1,329.39	Sqm	224.5	₹2,98,448.06
1.06	Total impact of GST for the purpose of CTC	1	Nos	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Item Description/ Heading

1.01

14,248.43

sqm

12.6

₹1,79,530.22

1.02

854.91

cum

5,157.6

₹44,09,283.82

1.03

14,248.43

sqm

10.75

₹1,53,170.62

1.04

569.94

cum

7,002.7

₹39,91,118.84

1.05

1,329.39

Sqm

224.5

₹2,98,448.06

1.06

Total impact of GST for the purpose of CTC

Nos