WELCOME MAINT ANDREPAIR TO SPALLING INTERNAL/EXTERNAL CRACKS FOR REMEDIAL RCC CEILING, MICRO CONCRETING, PERIODICAL SERVICES, EXTERNAL AND INTERNAL PLASTER SURFACES TO CERTAIN MD AND OTM ACCN IN AREA I OF AGE B/R WEST AT COLABA , MUMBAI.

Amount

Complete removal of existing treatment on Old Internal wall surfaces of any desciption, preperation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology all as specified and directed using M&L for the following : :- (a) Applying not less than 1.5mm thick wall care putty in two coats (Total thickness in two coats shall not be less than 1.5mm) on wall surface and smoothening the surface with Mechanised sanding etc prepatory to paint (b) applying two coat of acrylic emulsion distemper of approved tint over a coat of acrylic primer on prepared surface as (a) above by using Airless spray over complete all as specified all as specified Note: Contractor shall use mechanized sanding tools for complete removal and Surface preparation by Air spray machine Trucare-graco-ultramax-490-pc-pro or equivalent approved by GE.

M&L for complete removal of existing treatment of walls by washing down and smoothening old surface of walls, prerparation of surface and applying two coats of interior plastic emulsion paint with smooth roller finish all as specified and directed.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply one coat of distemper oil emulsion on walls through an authorised applicator all as specified and directed

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply one coat of distemper oil emulsion on celling through an authorised applicator all as specified and directed

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply two coats of distemper oil emulsion on walls through an authorised applicator all as specified and directed

M&L for 3mm thick wall care putty on wall as per manufacture instruction all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as apecified and directed

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old surfaces with one or more coats all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed

M&L in repairs framed brackets of angles, joist, channel, angle or tee sections fixed independently without connecting plates etc. cut to shape (cut to ordinary length i.e within 20mm of the length indicated) drilled and cuntersunk for screws, including bending and welding as necessary, confirming to fe-410-0 or fe 310-0 coplete as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified and directed by Engeer- in charge.

Resecuring or easing & adjusting, without taking down shutters of any description area exc 1.00 sqm but not exc 2.00 sqm all as specified and directed.

M&L Machine Grinding/rubbing/polishing to Terrazzo tile surfaces to mirror finish all as specified and directed.

S&F in reairs for Godrej night latch seven levers suitable for doors all as specified and directed.

S&F in repairs 9 feet pulley operated cloth drying system, aluminium anodised 20mm dia pipes, chanel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material all as specified and directed.

S&F in repairs hot water extention pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position all as specified and directed.

S&F in repairs for door bottom sealing strip guard/door gap file/door strip any colour fixed all as specified (minimum wt. 90gms) all as specified and directed.

M&L in repairs15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finished surfaces fair and even without using extra cement including taking down all as specified and directed.

M&L in repairs 5 mm thick plaster in CM (1:3) on ceiling surfaces, finished surfaces fair and even without using extra cement including taking down complete all as specified and directed.

M&L for filling cracks by cutting 'V' groove cracks of internal or external plaster of walls, ceiling/Chajja all along the crack upto 10 mm and removed the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and applying the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any height all as specifed and direcetd. Note : Use of Dr Fixit Crack 'X' shrink free paste compound/ Smartcare Texture Crack Filler / Build Core Compound / Fosroc Compound, as approved by GE

M&L for preparation of newly plastered wall/celling surfaces and applying 2 mm thick (average) wall care putty, rubbing with sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified and directed.

S&F in repairs 32mm dia brass chromium plated waste coupling for wash hand basins all as specified and directed.

S&F in repairs 15 mm bore pillar taps cast copper alloy, with capstan heads, chromium plated screwed down fancy type high pressure swan neck with or without lettered "HOT or COLD" with long screwed shank fly nuts all as specified and directed.

S&F in repairs PVC connection 15mm size 600 mm long all as directed & specified .

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories fixed with WC including syphone pipe, PVC flushing pipe of suitable size all as specified & directed.

S&F as in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repairs for 15 mm bore, fancy type, wall mixer, brass chromium plated with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator all as specified and directed.

M&L in repairs 15 mm bore fancy type health faucet with SS hose all as specified and directed.

M&L in repairs fancy type CP Towel Rail 61 cm long all as specified and directed.

S&F in repairs Premium CP Towel rack for bathroom /towel stand /hanger/bath room (24 in-chrome) all as specified and directed.

M&L in repairs CP soap dish all as specified and directed.

M&L in repairs CP toilet paper holder all as specified and directed.

S&F in repairs sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified & directed

S&F as in repairs stainless steel grating round 125mm size of anti- cockroach, anti-clog, anti faul all as specified and directed.

S&F in repairs vitreous China wash basin of any colour, flat back full pedestal wall hung with fixing accessories of any size including cutting for pinning in ends of brackets all as specified and directed.

S&F in repairs counter sunk wash basin oval shape 550x460mm fixed with waste coupling & waste pipe & accessories of any size all as specified and directed.

S&F as in repairs 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F as in repairs 15 mm bore fancy type bib taps long body cast copper alloy chromium plated, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs brass chromium plated, fancy type, 15 mm bore basin mixer or sink (central hole or wall mounted) with 'U' shaped round casted spout with 3" long pipe connection with aerator all as specified and directed.

S&F in repairs PVC cabinet mirror of size 300 x 450 mm all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white, including trap and connection to drain and flushing pipe (excluding flushing cistern) including seat cover with flat bottom and mild steel chromium plated or aluminium hinging devices for pedstal pan all as specified and directed.

S&F in repairs 15 mm bore overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long (light weight) round shape with wall flange complete all as specified & directed.

S&F in repairs water closet seat cover of any colour pattern with flat bottom, soft closing and mild steel chromium plated or aluminium hinging devices all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410 mm x 330mm x 160mm all as specified and directed.

S&F 32 mm waste pipe all as specified & directed

S&F in repairs 38mm dia brass chromium plated waste coupling for kitchen sink

S&F in repairs aluminium wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

Hacking out old broken glass (any thicknesss, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane 3 mm thick all as specified and directed.

S&F figured glass pin headed ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane 3 mm thick all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises out side MD land all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes like tiles all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match the shades of the tiles all as specified and directed.

M&L coloured double charged polished glazed vitrified tiles 10 mm thick (Square/rectangular) polished area of each tile exc 0.36 sqm but not exc 0.64 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.

M&L coloured double charged digital glazed vitrified tiles 10 mm thick (Square/rectangular) polished, area of each tile exc 0.36 sqm but not exc 0.64 sqm in vertical surfaces such as skirting & dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.

M&L Vitrified light shade coloured Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tile not exc 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.

M&L Vitrified light shade coloured Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tile not exc 0.36 sqm in vertical surfaces such as skirtings and dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.

M&L for epoxy grout to fill the wide joints of tiles and pointed in matching colour of epoxy grout ( MYK LATICRETE SP 100 or equivalent) floor and wall finishes all as specified and as directed.

S&F in repairs 25 mm dia stainless steel decorative type curtain rods and all other connected works all as specified and directed.

S&F in repairs 20 mm dia aluminium anodised powder coated curtain rods and all other connected works all as specified and directed.

S&F in repairs 25 mm dia stainless steel decorative type curtain Brackets including fixing in position and all other connected works all as specified and directed.

S&F stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600mm including screws all as specified and directed.

S&F in repairs stainless steel plate rack of size 900X580X210 mm fixed to wall with screws all as specified and directed.

S&F in repairs 100 mm butt hinges medium weight cold rolled stainless steel all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled stainless steel all as specified and directed.

S&F in repairs 75 mm butt hinges medium weight cold rolled stainless steel all as specified and directed

S&F in repairs aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.

S&F in repairs aluminium anodised 75 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium anodised 75 mm barrel tower bolts of extruded section all as specified and directed.

S&F in repairs aluminium handle 150 mm cast type anodised all as specified and directed

S&F aluminium handle 150 mm cast type anodised all as specified and directed

S&F in repairs aluminium handle 75 mm cast type anodised all as specified and directed

S&F aluminium handle 75 mm cast type anodised all as specified and directed

S&F in repairs 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate all as specified and directed.

S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

Taking down shutters of any description area n exc. 1.00 sqm each all as specified and directed.

Taking down shutters of any description area exc. 1.00 sqm but n.exc. 2.00 sqm each all as specified and directed.

Taking down shutters of any description area exc. 2.00 sqm each all as specified and directed.

Taking down Chowkhats or frames area exc 1.50 sqm but n exc 4.00 sqm each all as specified and directed..

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube suppling & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site out side MD land all as specified & directed.

M&L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick in cement mortar (1:6) all as specified and directed.

M&L for granite (of any approved colour) 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works, including moulding/rounding the edges of stone, laying over & including 15 mm thick cement mortar (1:6) all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore all as specified and directed

Refixing of old 15mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceilingor laid in floors all as specified and directed.

S&F as in repairs 15 mm bore fancy type sink cock (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs of stainless steel cabinet / drawers handle having a length of 250mm of any shape all as specified and directed.

S&F in repairs Telescopy channels soft cosing, powder coated with ball bearings, suitqable for sliding SS plate racks 60 cm long standard width, fixed over 2nd class HW rectangular fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillet fixed on cudappah stone with screws all as specified and directed.

S&F 18 to19 mm thick HDHMR board, prelaminated one side with decorative choice lamination & other side high glossy acrylic sheet of 3mm thick, exterior grade, fixed with screws to frame work as in cup borad & kitchen cabinet shutters and all other similar works all as specified and directed.

S&F Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver all as specified and directed.

S&F Factory made 35 mm thick 2nd hard wood plain framed panelled shutters (any panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003(Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc. sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats all as specified and directed.

S&F 2nd Class hard wood Glazed and skelton shutter 30mm thick open rebated and prepared to receive glass, gauge etc with sash bars divided into square with plain chamfered or rounded mitred and rebated sash bars any member as in windows ventilator styles and rails provided as per SSR part -I Sector 8 clause 8.24 (b) all as specified and directed.

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Providing and placing in position micro-concrete, grade M40, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 75 mm all as specified and as directed by the Engineer in charge (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument and including necessary form work)

RAMESH ENTERPRISES

NATH CONSTRUCTION

RUPESH CONSTRUCTION CO

HINDUSTAN BUILDERS

SHRI SAI ENTERPRISES

Anil Industrial Corporation

Bidder Name

HINDUSTAN BUILDERS

Frends Enterprises

RAMESH ENTERPRISES

Anil Industrial Corporation

NATH CONSTRUCTION

SHRI SAI ENTERPRISES

RUPESH CONSTRUCTION CO