REPAIR TO SECURITY/COMPOUND WALL AND OTHER B/R RELATED WORKS IN TECH AND DOMSTIC AREA AT AIR FORCE STATION AMRITSAR

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

Returning,filling in trenches including spreading watering and well ramming in layers not exc 25cm thick in soft.loose soil complete all as specified and as directed .

Excavation in post holes (or similar holes) each not exc. 0.5 Cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus spoil to a distance not exc. 50 m and making good surface in soft / loose soil complete all as specified and directed.

Removing excavated materials to a distance exc 1.50Km but n.exc 5.00 km and depositing where directed by EIC at a levlel not exc 1.5 m above the starting point.

M & L for PCC (1:4:8) type C-2 with using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed

M&L for fixing precast cement concrete PCC 1:2:4 Type B0 1:2:4 using 12.5mm graded crushed stone aggr as in louvres and jallies (jafri), 35mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

M&L RCC Nominal mix type B-1 1:2:4 using 20 mm graded stone aggregates as in columns, walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps, shuttring and bases) all as directed by Engr-in Charge.

M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required inclduing cranking bending spirally for hooping ends and binding with and incl mild steel wire (annelaed) not less than 0.90 mm dia or securing with clips.

S&F steel work in tubular section trusses incl special shaped washer etc. of any size as per requirement (IS Ref 1161:1998) sections fixed independently, with or without connecting plates etc. for compression members of shed with riveted, bolted or welded attachment complete all as specified and directed by Engr in charge.

Framed work ornamental type as in doors or gates of angle (Fe-410- W(Gde- E-250) quality- B) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete or as directed by Engr-in Charge.

S&F pre-painted galvatume aluminium zinc coating (az150) GI based corrugated steel sheet of thickness 0.5mm thick of any colour having tensile strength of 550 Mpa in roofcovering/wall cladding, fixed withself tapping screws/fastners as per manufacturers instruction complete all as specified and directe. (Make- SAIL, TATA and Jindal)

M&L 75 mm thick cement concrete type D-2, 1:4:8 using 40mm stone aggregate as in sub base all as spc. complete all as specified and directed

M&L for preparaition of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Demolation of brick work built in cement mortar cement lime mortar all as spd. complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and disposal of the rubbish complete all as specified and directed.

Demolition of cement reinforced concrete of any description and in any position not otherwise specifically provided for and disposal of the rubbish complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed.

Dismantling of plain/corrugated steel sheeting any gauge or thickness including Nainital or similar pattern roof covering complete all as specified and directed.

M&L for brick work with sub class 'B' Fly Ash bricks straight curved on plan exv 6m mean radius built in CM 1:6brick m slightly roundeda as wedged shaped as spd.ther part made of mild steel heavy duty in fixed all as spd.

ditto as per item no. 20 as above but except red brunt old size bricks (reuse of old brick from item no.14 )complete all as specified and directed.

M&L for 40mm thick cement cocnrete type B-1 (1:2:4) (20mm graded aggregate) finishing cement concrete surface even and smoothas surface without using extra cement all as spd.

Providing and laying at or near ground level factory made Sucer drain/kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engr-in-Charge.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed by Engr-in-Charge.

M&L for precast chequered cement concrete tiles 30cm x 30cm x 25 mm thick with grey cement and pigment set, jointed in neat cement slurry and pointed in coloured pigment to match the surface including 20 mm thick screed bed or beding layer for laying floor finishes in CM 1:6 complete all as specified and directed. (Make - NITCO,NTC, Duracret)

M&L 15mm thick cement plastering on fair faces in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and finish without using extra cement but with using water proofing compound including taking down Complete all as spc upto height 7.5 mtr

M&L 15mm thick cement plastering on fair faces in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and finish without using extra cement but with using water proofing compound to height 7.5 mtr Note : WPC shall be measured and paid separately.

Prepration of un decorated/newly plastered surfaces of walls, pillars, cornices by brooming down and applying two coats of 1st Quality Exterior EmulsionPaint with & incl over a coat of Exterior Primer of wall all as spd upto height 7.5 mtr. (Make - Asian Paints, Berger, Nerolac)

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.

S S CONSTRUCTION COMPANY (BID ID -3193382)

M/s AKG Engineers & Contractors (BID ID -3192153)

M/s Sahib and Company (BID ID -3192282)

Northern cable fault locatoers (BID ID -3193243)

om parkash and sons (BID ID -3193473)

kapoor and co (BID ID -3191780)

MAAN ENTERPRISES (BID ID -3193310)