GE (N) P/TOKEN- 45 OF 2020-2021 GE (N) P/TOKEN- 45 OF 2020-2021 SPECIAL REPAIR OF ROOF, FALSE CEILING, FLOOR AND SANITARY FITTINGS AT BLDG NO. 20 OF SCSR AND CERTAIN OTHER RW WORKS IN THE AREA OF AGE B/R (EAST) UNDER GE (NORTH) PUNE

Amount

Excavation in post holes ( or similar holes) each n.exc. 0.50 Cum, getting out, returning, filling in and ramming earth or borken rubble mixed with earth around, in layers n.exc. 25 cm thick in soft/ loose soil complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in foundation, caps and bases of posts etc. complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in lintels upto 1.5m clear span, seismic and other similar bands, cills, plinth courses, roof kerbs, parapets, coping, benching, coping, hold fast blocks, bed blocks/ bed plates, kerbs for interlocking tiles etc. including weathering, slightly rounded or chamfered angles and throating including necessary form work all as specified and as directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan to any radius, in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4) over and including 10mm thick backing coat in cement mortar (1:3), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, edge moulding, full curving the edges complete all as specified and as directed.

Supply and fix for 2nd class hard wood boarding, 20mm thick, planed one side with butt joints and fixed with nails in any situation as in eaves board/ fascia of roof complete all as specified and as directed.

S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single executed process) material with density 780 Kg/ Cum, all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single executed process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 35mmx 6mm thick 2nd class hard wood plain cover fillets on all sides including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame)/ steel windows/ ventilators area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

Supply and fix factory made solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 19mm x 19mm (19 gauge) for top rail, bottom rail and in styles with 2, 4, or 6 raised panel design with 5 mm thick Moulded Prelam PVC Sheet on the front face & 5 mm thick prelam PVC plain sheet on back face, inside core shall be of PVC soild board of 19mm to 20mm thick, door shutter shall be provided with 10mm thick PVC lipping all around the edges, supplying & fixing in frame at site as per specification & drawing. Note: All screws shall be self tapping chromium plated screw not less then 50mm long.

S & F Factory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 29 to 30mm thick consisting of frame made up of MS tube of size 19mm X 19mm (19 guage) for top & bottom rail and in styles. Single piece plain coloured PVC sheets of 5mm thick to be used to cover style & rails. For edges, PVC sheets strip of 10mm thick struck inside with solvent cement. Plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert with PVC solid core board 19mm to 20mm thick. Panel shall be of wire gauge stainless steel wire cloth 0.36mm nominal dia of wire and everage width of aperture 1.40mm, stainless steel wire cloth shall be covered with aluminium XPM in rhombus shape in one piece from top to bottom rail, fixed with self tapping screw not less then 50mm long complete all as specified and directed by Engineer-in-Charge.

S&F pre-laminated (Printed) PVC rigid foam sheet of any shade wall paneling of 5mm thick stuck with adhesive on inner frame work of 35mm wide strips of 5mm thick rigid foam sheet. The strips should have a groove of 6mm width and 2mm depth for sinking the head of screw used to fix the strips to the wall and should be placed vertically at equal intervals of 600mm C/C. The PVC strips to be fixed to the wall using 65mm long MS screws though the groove in the strip by using PVC faster complete all as specified and directed.

S&F Stainless steel butt hinges 100mm medium weight all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as directed and specified.

Supply and fix 20mm bore aluminium powder coated fancy type curtain rod decorative type complete all as specified and as directed.

Supply and fix for aluminium handle complete all as specified and as directed. Note :- Catlouge numbers of Jindal (20606) or equivalent.

Supply and fix for aluminium interlocking arrangement complete all as specified and as directed. Note :- Catlouge numbers of Jindal interlock (20605) or equivalent.

Supply and fix, aluminium powder coated fancy type decorative funnel/ brackets suitable for 20 mm dia curtain rod fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.

Supply and fix in reapir tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges including brackets with brass screws and wooden plugs complete all as specified and as directed.

Supply and fix for floor door stopper of stainless steel body and tongue, with hard drawn steel spring, overall length of cover plate 140mm with rubber shoe all as specified and as directed. Make: Maharaja door stopper cat No. 5121 or equivalent as per Appx 'A' as approved by GE.

Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed in aluminium sections complete all as specified and as directed

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, column posts, wind ties, fixed with angle cleats or other connecting plates, drilled for fixing all as specified and directed.

Erection and fixing only for rolled section as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, column posts, wind ties, fixed with angle cleats or other connecting plates, drilled for fixing all as specified and directed. (obtained from item No. 101 hereinafter)

Supply and fix for mild steel work in tubular trusses, main columns, posts, for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

Supply and fix for aluminium anodised louvered ventilator with adjustable louvers using standard aluminium section as specified including glass 4mm thick frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc. complete all as specified and directed.

Supply and fix for aluminium anodised three track sliding window with two glazed shutters, one shutter with and including 4mm thick tinted glass of modiguard and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted/ black glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

Supply and fix for powder coated aluminium double leaf, two panels, openable door , 5mm thick plain glass panes fixed with garware sun control film, fixed with rubber beading and glazing clips, alongwith supplying and fixing aluminium body hydraulically regulated door closer, designation No 2 universal type, suitable for sheet width 701 to 850mm of weight between 36 to 80 kg , mortice door lock, handle, tower bolt 200mm (02 Nos.), aluminium sliding bolt using aluminium sections all as specified and directed. Note :- Catlouge numbers of Jindal or equivalent company. (i) Top-19528 (ii) Middle-19575 (iii) Bottom-19530 (iv) Vertical-19526 (v) Glazed clips section No. 19381 and 19352 (vi) 1'' interlock (20939) (vii)1'' handle(20602) .

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

Supply and fix (Except sheeting) for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Material and labour for Roof tiles Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed.

M&L for Roof tiles (Except tiles) Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed. (Note : Serviceable tiles obtained from dismantled shall be re-used.)

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) etc including dismantling of tiles complete all as specified and as directed.

Material and labour for ridge or hip tiles (Except tiles) to suit Manglore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) complete all as specified and as directed.

Supply and fix for tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking Gyproc Matrix metal grid of hot dipped galvanized steel sections. It consists of main "T" runner of size 24x38x0.3x 3600mm, cross "T" of size 24x25x0.3x 1200mm, secondary cross "T" of size 24x25x0.3x 600mm and PPGI wall angle of size 24x24x0.4x 3000mm. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI. PPGI wall angle 24x24x0.4x 3000mm {Material-GI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed along the perimeter of the ceiling to Walls, partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc ® soffit cleat 27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. Main-T runners 24x38x0.3x3600mm are then suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T and not more than 150mm from spliced joints.

The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall/ hung from ceiling using 2mm dia. G.I. suspension wires and 'J' bolts, washers, nuts spaced at 1200 mm both ways as per site requirement. 24x25x0.3x 1200mm cross T {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM (IS277) } is interlocked between the main T at 600mm center to center to form a grid of 1200x 600 mm and then secondary cross “T" 24x25x0.3x600mm {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM(IS277) } is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally 9.5mm thick square edge Gyproc Polyshield Gypsum tile of size 595x595mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges, so as to make the tile a completely sealed unit, is placed in the grid including making niches for fans/ light complete all as specified and as directed. Make: Gyproc-Saint Gobain of equivalent or Armstrong, Diaken, New Age (ACE) as approved by GE.

Material and labour for hand cut kota stone slab 20 to 25mm thick in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including screed bed 20mm thick in cement mortar (1:6), including rubbing and mirror polishing complete all as specified and as directed.

Material and labour for hand cut kota stone slab 20 to 25mm thick as in vertical surface such as skirting and dado, jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including backing coat of 10mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection, floor, hardstanding, courtyard, path laid in alternate bays not exc. 3.0m, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded broken stone aggregate) as in floor topping finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for roughing surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust, etc. & brushing neat cement slurry with 3.00 kg of cement per Sqm complete all as per specified and as directed.

Material and labour for coloured designer wall concept ceramic tiles of size 450mm x 300mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11sq.m but not exceeding 0.18sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for 25mm thick coloured Glossy Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces with sponge finish complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces wall finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing of walls, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered to receive new finish complete all as specified and directed.

Material and labour for preparation of newly plastered or unplastered wall surfaces or surface obtained after complete removal of existing treatment under item No. 65 above and applying two coats of oil bound/ acrylic distemper over a coat of priming paint over a coat of putty to obtain true line to achieve smooth surface complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed

Supply and fix 5mm thick sheet glass, ordinary quality in square, rectangle any size as in aluminium frames/ shutters complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wood based material surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down steel tubing with all fittings and connections complete all as specified and as directed.

Supply and fix in repair bib tap for 15mm bore pipe, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in reapir pillars tap for 15mm bore pipe, cast copper alloy, with capstan heads, chromium plated, cast copper alloy, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair stop valves for 15mm bore pipe, fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix for grating doom round 100mm dia of PTMT (minimum weight 25gms) complete all as specified and as drected.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in reapir for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 110 mm bore pipes complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 75mm bore pipes with access door complete all as specified and as directed.

Supply and fix in reapir for PVC (SWR) vent cowl for 75mm bore pipe complete all as specified and as directed.

Material and labour in repair for cast iron floor trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Material and labour for PVC (SWR) gully trap 125/ 110 setting and jointing with solvent cement complete all as specified and as directed.

Supply and fix in repair for vitreous china, squatting pan, 'Orissa' pattern, complete of size 580 mm x 440 mm, white, with PVC 'P' of 'S' trap, front or back inlet and foot rests any pattern and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. including making good to floor complete all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern), white including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, PVC jet, PVC connection 450/600mm long with PTMT nuts, necessary inlet and outlet connections including making good complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair vitreous China half stall type urinal , white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, including 5 ltrs capacity PVC automatic flushing cistern with brackets, 32mm dia PVC flush pipe and discharge pipe, grating and union for discharge pipe complete all as specified and as directed.

Supply and fix in repair brass chromium plated fancy type shower rose 125mm size with swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Demolition of brick work/ precast concrete block walling/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed.

Dismantling of stone slabs and chequered tiles of any description or thickness in floor, apron etc., laid bedded and pointed in any mortar complete all as directed.

Dismantling timber scantlings, framed work, 40 sq. cm and over in section, in any position complete all as directed.

Dismantling timber scantlings, framed work, as in fillets, rails, posts, rafters, purlins etc. under 40 sq. cm in section, in any position complete all as directed.

Dismantling wooden boarding/ plywood of any description and any thickness including fillets fixed in any position with nails complete all as directed.

Dismantling battens for tiles, shingles etc. of any size including tiling fillets spaced exceeding 15cm complete all as directed.

Dismantling wrought iron or mild steel work of grill, guard bars or any description not otherwise provided for complete all as directed.

Dismantling structural steel work including framed truss etc. complete all as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness sheets including Nainital or similar pattern roof coverings complete all as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as directed.

Dismantling of wall/ceiling board/POP ceiling of any description and any thickness including cover fillets/ grid etc complete all as directed.

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit/casing caping including removal of batten/ conduit/ casing caping/ gutties/ wooden boards/ switches/ sockets/ regulators/ holders/ ceiling roses/ call bells/ light fittings etc. for taking credit and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed. Note: Taking down of seviceable fittings and fixtures shall be measured and paid separatey.

Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy grade, ivory/ white colour, ISI marked, 20 mm dia or higher dia. rigid PVC concealed conduit of including all accessories after chasing in wall/ ceiling etc, with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.108 here-in-before but point wiring for one exhaust fan/ wall fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.108 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on same board.

All as per serial item No.108 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.108 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Supply and fix for lamp holder, PVC body/ polycarbonate type with back plate, brass terminals suitable for batten/ slanting fittings complete all as specified and as directed.

Supply and fix for modular switch, one way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 15/16 Amprs, 1 module complete all as specified and as directed.

Supply and fix for modular socket outlet multi purpose 2 & 3 pin 5/6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 3 pin 5/6 Amps and 3 pin 15/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular step type electronic fan regulator flush type 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall, connecting complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 63Amps, 415Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body complete all as specified and as directed.

Supply and fix for highly efficient LED bulbs 10W with lumens out put not less than 1000 lumens, used as ready replacement for existing GLS/ CFL direct fit lamp in B-22 cap of make Havells/ Philips/ Wipro/ Bajaj/ HPL as approved complete all as specified and as directed.

Supply and fix for LED 10 watts batten aluminium extruded with decorative end caps all as per Cat No. BCLSB 10 NW/ WH of make Bajaj, Wipro Cat No. LL20-111-XXX-65-NE or its equivallent model in Havells, Philips as approved complete all as specified and as directed.

Supply and fix for wall mounted LED 18 watts with lumens out put not less than 1800 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BLRB-DB118 & BLRB 18W CWc of make Bajaj or equvalent of make Philips/ Wipro/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed.

Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 25 watt with high power LEDs as light source and electronic driver with lumens out put not less than 2500 lumens, with prewired all as per Cat No. BRLEP 25 W LED WH (Edge plus series) of make Bajaj, Philips CAT part No. BRP042 LED HP CW 25W or equivalent of make Wipro/ Havells/ Crompton/ as approved, necessary mounting arrangements and provision of 2.5 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 40mm dia 1.5 metres long GI pipe medium grade bracket of suitable shape with clamps made out of MS flat iron of size 40mm x 6mm, nuts, bolts complete all as specified and as directed.

Supply and fixing for 50mm bore GI tubing medium grade for supporting the ceiling fan including necessary fixing arrangement in between two walls with PCC 1:2:4 Type B1 as per site requirement complete all as specified and as directed.

Taking down carefully ceiling fan/ exhaust fan of any sweep, keeping with safe custody and refixing the same after cleaning dust, oiling, greasing, servicing etc. with replacement of unserviceable PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal, complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I including taking out existing earthing . (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Gauri Associates

M/s Asrani and sons

M/S Sharvi Construction

MANISH VEDPRAKASH ARORA