Loading…
Loading…
Tender Value
₹35.6 Cr
EMD Value
₹42 L
Closing Date
21 Sept 2026, 4:00 pm
Karnataka Neeravari Nigam Limited
Sri Deepak kamble
Design, Fabrication, Supply, Erection, Testing & Commissioning of Vertical Lift Crest Gate of Hipparagi Barrage. (Gate No. 1 to 21)
KNNL/2026-27/GH/WORK_INDENT4670
KNNL/2026-27/GH/WORK_INDENT4670
Open
Gates/Hoists and Allied Works
Two Tender Document System(Two Cover)
KNNL Division HBC Div Athani
18 documents required · 18 mandatory
A valid copy of the KPWD/CPWD Class-I registration with validity.
Valid Employees Provident Fund Registration Certificate with recent EPF paid challan
The tenderer should complete the provisions of the contract labour (regulation and abolition act 1970) and the corresponding karnataka rules 1974)
To qualify for award of this contract each tenderer in his or her in the name should have achieved. In the last five years (2021-22 to 2025-26) should have satisfactorily completed at least 90% of contract value as a prime contractor, at least one similar nature of work of value not less than rs. 20.99 crores (usually not less than 50% of the amount put to tender under this contract). Work done certificate issued by an officer not below the rank of executive engineer of the concerned division and countersigned by the superintending engineer of the concerned circle is to be uploaded for the technical bid. The cost of completed works of the previous year shall be given a weightage of 10% per year to bring it to the price level of financial year in which tenders are invited. Certificates should be obtained from the officer not below the rank of executive engineer note: similar nature of work means bidder should done the work in design, fabrication, erection and commissioning of vertical gate for major dam/ barrage including dismantling of old gate and doing cementitious grouting work since last 5 years (any one year) as above-mentioned years
Each tenderer in his or her in the last 5 years (2021-22 to 2025-26) should have satisfactorily Executed in any one year the following minimum quantities of work 1 Fabrication, Erection and Commissioning of Vertical Gates of Size not less than 13.72 Mtr x 8.23 Mtr or Area not less than 112.92 Sq.Mt 620 Tonne
Equipments Required during Execution of works (Own or Hired) Welding Machine(Big) 10 Nos, Sandblasting Equipment 3 Nos, Tool kit(big) 10 Nos, Hydraulic Cranes (50Tonne) 1Nos, Hydraulic Jacks 5 Nos, Hydraulic cranes (12 Tonne) 5 Nos
financial turnover : The intending bidder should have achieved a minimum financial turnover of not less than amount put to tender i.e Rs 67.14 crores, in any of the two financial years during the last five years reckoned back from 2025-26 (turnover during 2021-22 to 2025-2026 only will be considered) duly updating the financial turnover at 10% per year to bring it to the price level of financial year in which the tenders are invited. Audited profit and loss statement (with year wise turnover statement) certified by a practicing Chartered Accountant with mentioned compulsory UID number along with copy of Income Tax returns filed for the two years indicated above shall be furnished. (If UID Number not mentioned treated as incomplete and rejected)
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity ( AxNx1.5- B ) where A Maximum value of civil engineering works executed in any one year during the last five years(2021-22 to 2025-26) (updated to 2026-27 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 0.50 years (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
GST Registration certificate/ Pan Card
Latest copy of the Income Tax return for financial year 2025-26 (Assesment year 2026-27)
Liquid Assets and or availability of credit facilities of not less than Rs 8.40 Crores (Credit lines/ letters of credit / certificate fromnationalized/scheduled banks) for meeting the fund requirements etc., (usually the equivalent of the estimated cash flow for 3 months in peak construction period)
The tenders from joint ventures are not acceptable and therefore will not be considered for technical bid evaluation
Scanned signature of the bidder along with phone number / authorised representative in case of a firm or company, to be attached while uploading the bid documents. Also in case of authorised representative, scanned copy of power of attorney should be uploaded & the original should be produced at the time of opening of tender
The Agency should adhere to execute the work as per specified specification mentioned in Shedule-B
Availability of key personnel with adequate experience as required should be indicated based on the requirement for the work to be executed 1)Graduate Engineers (Mechanical)-05 No 2 Diploma Engineers (Mechanical)-05No
₹7,500
₹42 L
7 Sept 2026
7 Sept 2026
23 Sept 2026
17 Sept 2026
18 Sept 2026
Design, Fabrication, Supply, Erection, Testing & Commissioning of Vertical Lift Crest Gate of Hipparagi Barrage. (Gate No. 1 to 21)
cutting, removing of Service gates size 13.72m x 8.23m (Gate No.22) including cost of all materials, machinery, labour, transportation, gas cutting, cleaning, removing from respective bays and storing...
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate consisting of skin plate, vertical and horizontal girders, wheels, sti...
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate consisting of skin plate with all accessories for barrage including cost of all materials, machi...
EMBEDDED PARTS.Resetting and alignment of the crest gate embedded parts for smooth operation, including cost of materials replacement of wornout materials, lubrication, cost of labour, hire charges of...
HOIST MECHANISM a) Check condition of wire rope. b) Check equalizer plate assembly and sockets. c) Check tension in wire rope. d) Check lifting bracket pin. e) Check wirre rope is properly fastened t...
Providing & supplying Wire Rope ( confoming to IS-2266 ) for vertical crest gates of barrages with including cost labour, transportation etc., complete with as per approved drawing & dimension.
Providing and applying cardium compound approved quality to wire ropes of hoist/gantry cranes at part of manual maintenance using grease gun, wherever necessary including cost of all material...
Providing and supply of roller assembly including bearing of 22319CC straight bore of maake (SKF / NSK / ZKL / FAG ) with pressed steel gauge minimum static caapacity of 670000N, ...
Removing Stoplog gate by help of existing Gantry crane including labour complete as per the direction of Engineer-in-charge.
Fabrication, manufacturing, supply, erection including all kind of material of Stoplog Dogging /Latching arranngement of stoplog of Service Gates including cost of all materials, machinery, labour, cu...
Reconditioning of Embedded Parts, Providing & laying Stage Micro Concreting to gate embedded parts of Hipparagi Barrage with Supply and Filling of cementations material micro concrete (GP2)/equivalent...
Providing and applying Galvanizing Protective Painting system to fabricated dam gates, stoplogs, embedded parts including surface preparation, galvanizing, painting, inspection, testing, transportati...
PART - B: Repairs to Spillway portion, bucket portion and piers bottom portion. Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigat...
Providing & fixing steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
DTP1.doc
Tender Document • 0.78 MB
notification_gate_1_to_21222.docx
Instructions to Tenderers • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .