Construction of community hall at Disket

Amount

Providing corrugated G. S. sheet roofing including vertical/pcurved surface fixed with polymer coated J or L hooks, boltsand nuts 8mm diameter with bitumen and G. I limpet washersor with G. I. limpet washers filled with white lead and includinga coat of approved steel primer and two coats of approvedpaint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size andshape whereever

Providing and laying stone soling in horizontal level

Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) nallah

15mm thick cement plaster on rought side single or half brick wall of mix

Providing and fixing wall penalling 12mm thick ply board , placing with tounged and grooved geometrical design including French polishing complete job.

Providing, fixing and applying plaster of paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, -i suspended/ supported with M.S. flats 25x4 mm from existingR.C.C. slab including providing and fixing expanded metal ofsize 5.25mmx1.25mm thickness welded to main runner andapplying POP (calcium sulphate semihydrate variety)to the expanded metal of thickness not less than Omm finished smooth to line and level including necessary supportsscaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. fiame work and suspenders complete.

French spirit polishing with Two or more coats on new works including a coat of wood filler

Random Rubble masonry with hard stone from nallah infoundation and plinth including levelling up with cement concrete1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate20mm nominal size) at plinth level with

Providing and fixing action teas AC 3 for flooring including complete job….

Providing and fixing glazed shutters for doors, windows-~--:-------~and clerestory windows using 1 Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt• hinf!eS bright finished of required size with necessary 35 30screws.

Providing and fixing panelled or panelled and glazedshutters for doors, windows and clerestory windowsincluding lSI marked M.S. pressed Butt hinges brightfinished of required size with necessary screws excludingpanelling which will be paid for separately,al!completeas per direction of engineer- in charge.

Carriage of sand and bajaree by MT 15km

Carraiage of cement by MT 118km

Carraiage of cement by MT 20km

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :•13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litrelow level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

Providing c;1nd fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillartapswith elbow operated levers

Providing and fixing mirror of superior glass( of approvedquality) and of required shape and size with plastic .moulded frame of approved make and shade with 6 mmthick hard board backing Rectangular shape 1500x450 mm

Providing and fixing of brass toilet paoer holder including cost of wooden pvc ect

Providing and fixing of Soap dish (cp.brass) with brackets

Providing and fixing brass bib cock of approved 15mm nominal bore

Providing and fixing flow trap of PVC

Providing and fixing soil, waste and vent pipes : 100 mm dia. Centrifugally cast (spun) iron S&S pipe

Providing and fixing soil, waste and vent pipes 75 mm diameter.

Providing and fixing of plain bends of required degree 100mm diapvc

Providing and fixing of plain bends of required degree 75MM diapvc

Providing and fixing 3-layer ppr poly propylene Random copolymer pipes SOR7.4UV stabilized Anti microbial fusion welded having thermal stability for Hot and cold water supply all PP-R plain 15mm dia pipes

Providing and fixing 3-layer ppr poly propylene Random copolymer pipes SOR7.4UV stabilized Anti microbial fusion welded having thermal stability for Hot and cold water supply all PP-R plain20mm dia pipes

Providing and placing on terrace at all floor level polyethylene water storage tank

Providing and fixing cp brass close hole basin ,mixer pillar type of approved quality 15mm nominal bore of standard back type

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing CP JALLI

Providing and fixing connection pipe of approved brand

Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality andcolour: 600 mm long towel rail with total lengthof 645 mm, 78 mm wide and effectiveheight of 88 mm, weighing not less than190 gms

Wiring for light point 6amp socket/exhaust fan point / call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 0.75 Sq.mm. FR PVC insulated copper conductor single core cable as required.

Wiring for 16amp socket outlet with 2.5mm FR PVC insulated copper conductor cable in existing recessed PVC conduit including sheet as required.

Supplying and drawing circuit wire for light and 6/16amp socket outlet with 4.0sqmm FR PVC insulated copper conductor single core cable in the recessed/surface PVC conduit pipe as required.

Supplying and fixing of 25mm PVC conduit capping along with accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supply and fixing of a 10amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch M.S box complete as required including connection.

Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutter and 10amp 240 volt single pole mounted in recessed including M.S box complete as requird..

Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutter and 20amp 240 volt single pole mounted in recessed including M.S box complete as requird

Supply and fixing of following single pole and neutral sheet steel MCB distribution board 240 volt on surface recess complete with tinned busbar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 24 way double door SPN.

Supply and fixing of the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed/Tube lightning 20 watt 3000k, round LED Luminaries as per Philips

Supply of 1100 volt grade aluminium conductor KPLE insulated PVC sheath arranged complete as per specification as required 25 sqmm, 3.5 core

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. A) Single pole 6/10/20 Amp

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required.B) Double pole 40 Amp

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required.C) Double pole 63 Amp

Wiring for changeover 63 amp and installation with complate accessary and holes on wall as requre

Junction box 3 inches 250 grams G.I with holes for connection, submersed in concrete with connections as required.

3 modular plate

6 modular plate

8 modular plate

12 modular plate

fan box with rod 500grms G I with holes for connection , submersed in concrete with connection as required

ceilling fan regulater

Exhaust fan 150 mm

M/S HAJI MOHAMMAD ALI

M/S MEHDI ALI GOVT CONTRACTOR

M/S IBRAHIM ALI

M/S GULAM HUSSAIN

M/S MOHAMMAD MOSSA

nazir hussain

M/S TSERING MOTUP