THE WORK OF REPLACEMENT/REPAIRING OF DAMAGED POLE AND CONDUCTOR

Amount

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

ST Pole 11 Mtr. Long

ST Pole 9 Mtr. Long

ACSR Dog Conductor

ACSR Weasel Conductor

Earthing Complete

Stay complete with 5 Kg. wire

11 KV Pin Insulator with fitting

11 KV Disc Insulator with fitting

11 KV Top Channel

11 KV V Type X arm

Supply of following material/fitting of HT/LT Line complete in all respect as per site requirement-

LT ABC (3X150+1X120+1X16) Sq.mm. Cable

LT ABC (3X120+1X95+1X16) Sq.mm. Cable

Distribution Box with Clamp (Distribution box shall be made from 20 SWG CRCA sheet by Deep Drown method with powder coating & size of box shall be 225 mm X 285 mm X 120 mm (Roof of the box shall be tapered on both sides to drain the rain water)

Distribution Box with Clamp (Distribution box shall be made from 20 SWG CRCA sheet by Deep Drown method with powder coating & size of box shall be 418 mm X 300mm X 120 mm (Roof of the box shall be tapered on both sides to drain the rain water)

Insulated Dead end clamp with I hook for LT ABC (3X150+1X120+1X16) Sq.mm. Cable

Suspension, clamp with I hook (Insulated) for LT ABC (3X150+1X120+1X16) Sq.mm. Cable

Insulated Dead end clamp with I hook for LT ABC (3X120+1X95+1X16) Sq.mm. Cable

Suspension, clamp with I hook (Insulated) for LT ABC (3X120+1X95+1X16) Sq.mm. Cable

LT insulated Piercing connector

XLPE 1X35 Sq.mm. Al. cable for energizing D.B.

LT Clamps

LT Shackle Insulator

Holding Clamps

Nuts and Bolts

The excavation of foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Pole with fixing of necessary clamps & accessories as per required. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). In case of ST Pole making Plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. All work will be done as per RESPO norms & relevent IS Specification.

STP pole 11 meter long

STP pole 9 meter long

Laying, stringing, sagging, binding and jumpering of conductor for LT/11 KV/33KV Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required.

ACSR Dog Conductor

ACSR Weasel Conductor

Laying, stringing, sagging, binding and jumpering of ABC (3X150+1X120+1X16) Sq.mm. Cable of LT Line with fixing of Distribution Box with Clamp, Insulated Dead end clamp with I hook, Suspension clamp with I hook(Insulated), LT insulated Piercing connector, XLPE 1X35 Sq.mm. Al. cable for enerzing DB, XLPE 1X16 Sq.mm.

Laying, stringing, sagging, binding and jumpering of ABC (3X120+1X95+1X16) Sq.mm. Cable of LT Line with fixing of Distribution Box with Clamp, Insulated Dead end clamp with I hook, Suspension clamp with I hook(Insulated), LT insulated Piercing connector, XLPE 1X35 Sq.mm. Al. cable for enerzing DB, XLPE 1X16 Sq.mm.

Repairing of damage/Rusted Steel Tubular Pole by digging of pit around pole of size 1.0 mtr.X 1.0 mtr.X1.0 mtr. is to be done for proper position and then cleaning of rust and descaling with the help of hard wire brush & chisel and then Putting 3 Nos. 1 mtr. long Angle of size 50x50x6 mm, properly welding on 3 circle with pole. After completing of above work Grouting and Plinthing 300 mm Above level with cement concrete and sand and bricks ballast. After that Painting of ST Pole by double coating Aluminium & Red oxide paint. (All material, labour and T&P will be provided by the Contractor)

Dismantling and again stringing sagging, binding and jumpering of old existing Dog/weasel conductor with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts.

Painting of ST Pole by double coating Aluminium & Red oxide paint. Paint will be provided by contractor

Earthing of Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO norms.

Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with nozelling and binding of stay wire (Complete work)

Disconnection and Re-connection of consumer cable of complete LT Line (Single/Three Phase)

Videography & GPS survey of Site before starting of work

Videography of site after completion of work

Dismantling of following Line materials and safe loading, unloading and carraige of dismantled material from work site to departmental store (As per site requirement)

STP pole 11/9 meter long

ACSR Dog/Weasel Conductor

Ingenious Energy Infratech

Shyam Constructions