Webel IT Park 07 IDM 19 20 85

Amount

Full Height Partition

The rate should include for providing minimum 120 - 130 mm wide box type wire management just above/below the table top as well as skirting level for wire management system, to be fabricated with CRCA sheet of minimum 0.8 mm thick finished with powder coated 40 to 50 micron suitable provision for switch board and sockets outlets as per requirements for power line and Data/Tele lines along the base and at the table height as specified.

The skirting will be fabricated out of 20 SWG M S sheet. The skirting will be approachable from both sides and will have channels for adjustment for floors. Panels of partitions are to be fitted by using aluminium profiles and PVC extrusions are used as trimmings.

All metal sections, fabricated MS components and aluminium profiles are finished in 40-50 micron epoxy powder coating of approved make.

The rate should be including provision of slots as per site requirement in vertical member for cantilevered accessories like overhead store, work top etc. All complete as per drawing and directions with all labour and materials.

Partition facia fabricated with minimum 8 mm thick prelaminated MDF board of approved shade on both sides of the frame work fitted with connectors. All complete as per drawing and directions.

Partition facia made wilth single glass of minimum 5 mm thick toughened glass of approved make fixed to the partition frame fitted with powder coated aluminium extruded section all complete as per drawing & direction.

Half Height Partition

Supplying, fabricating and erecting low height partition 65 to 75 mm thick of modular grid system of approved make consisting of minimum

1.2 mm thick CRCA frame work with powder coated (40-50 micron) fitted and fixed in position as per drawing and direction including providing height adjuster below ceiling/floor. Allow for cutting chases to wall and floors and mending good damages. Frame are to be fitted with masonry/RCC surface by means of approved metal (brass) expansion fastener. The rate should include for providing minimum 120 - 130 mm wide box type wire management just above/below the table top as well as skirting level for wire management system, to be fabricated with CRCA sheet of minimum 0.8 mm thick finished with powder coated 40 to 50 micron suitable provision for switch board and sockets outlets as per requirements for power line and Data/Tele lines along the base and at the table height as specified.

The skirting will be fabricated out of 20 SWG M S sheet. The skirting will be approachable from both sides and will have channels for adjustment for floors. Panels of partitions are to be fitted by using aluminium profiles and PVC extrusions are used as trimmings.

All metal sections, fabricated M.S components and aluminium profiles are finished in 40 to 50 micron epoxy powder coating of approved shade.

All exposed edge and visible are will be covered with minimum of 1.2mm Thick CRCA Trim and all joints like "T","L" and "+" will be covered will Alluminium caps.No PVC capwillbe allowed here.

The rate should be including provision of slots as per site requirement in vertical member for cantilevered accessories like overhead store, work top etc. All complete as per drawing and directions with all labour and materials.

Partition facia fabricated with minimum 8 mm thick prelaminated MDF board of approved shade on both sides of the frame work fitted with connectors. All complete as per drawing and directions.

Partition facia fabricated with minimum 8 mm thick prelaminated MDF board of approved shade on one side of the frame work fitted with connectors. All complete as per drawing and directions.

Providing and fixing door shutter / door jamb will be made out of 20 SWG M.S sheet. The shutter are to be finished with minimum 32 mm thick high quality Flash Door with 1mm Laminate pested on both sides of the frame work fitted with connector and with a vision panel (150 mm x 450 mm of 5 mm thick glass) All the panels are to be fitted by using CRCA " C" profiles and PVC extrusions are used as trimmings.

All MS components and aluminium profile are finished by 40-50 microns epoxy powder coating.

The shutter will be fixed on Pivot hinges duly powder coated and will have door closures, handles and locking arrangement all inclusive of approved quality as per drawing & direction of Engineer-in-Charge.

False Ceiling

Providing & fixing suspended gypsum false ceiling, which includes G.I. Perimeter channels of size 0.55mm thick having one flange of 20mm and another flange of 30mm and a web of 27mm along with perimeter of ceiling screw fixed to brick wall/partition with the help of hylon sleeves and screws at 600mm channels of size 45mm X 0.9mm thick with 2 flanges of 15mm each from the soffit at 1220mm centers with ceiling angle fixed to soffit of 0.55mm thickness having knurled verb of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips at 457mm centers, 12.5mm tapered edge gypboard is then screw fixed to ceiling section, boards are to be jointed and finished with jointing compound, paper tape and top coat.

Third floor

WORK STATION:_ Supplying and fixing of approved make minimum 25 mm thick work top with minimum 0.7 mm thick high pressed post form laminate of approved shade and quality top, bottom and sides. All the edges will be chamfered and finished with PVC lipping of 1.2 / 2.0 mm thickness. The frame will have the necessary provisions for suspending drawer units and fixing of sides or 25 mm thick post form laminated board without frame work. The workstation should be fitted with cantilevered brackets to tables and attached to the partition frame work. The keyboard trays shall be minimum 500 wide of 18 gauge mild steel body with anti rust treatment. This shall be finished in 50 micron powder coated in epoxy paint. The key board trays shall be fixed below table top with necessary hardware for easy sliding. The CPU trolley of size 240 x 240 x 245 mm having adjustable width and lockable castors made of 18 gauge thick steel sheet with powder coating of 50 micron.

All board components tops, sides etc are finished with laminate and all the edges chamfered at 45 degree. The rate should include necessary approved hardware fittings for fixing the table top, modesty panels, side board etc including making .hole on the table top for connecting the wires, the hole to be covered with dark coloured PVC insert (wire manager) with movable part to put wires and socket and neatly cover the hole. All complete as per drawing and direction with all labour and materials. for type a) Main work top 1350 x 1200 x 600 x 475 mm. All complete as per drawing.

For type b)Main Work Top 1200 mm x 600 mm. All complete as per drawing.

for type C)Main worktop 1500 mm x 750 mm and return work top 650 mm x 450 mm all complete as per drawing.

Supplying, making and fixing wall mounted suspended filing cabinet 400 mm deep and 450 mm high with openable shutters. The cabinet top, bottom, shelf and sides made of 18 mm thick PF bonded MDF board of approved make and shutters made of 12 mm thick phenol formaldehyde bonded MDF board and 8 mm thick prelaminated MDF board of approved make at back. Fixing of the cabinet would be done by powder coated M.S cleat with necessary accessories.The rate should include necessary approved quality hardware fittings required for the purpose like suspending clip, bracket, cabinet lock, handle, stainless steel tower bolt, stainless steel hinges, ball catchers etc. The item is to be completed in all respects as per drawing and direction with all labour and materials to the satisfaction of Engineer-in-Charge.

Floor Cabinet Supplying credenza unit of approved make top 25 mmbottom and side made of minimum 18 mm thick phenol formaldehyde bonded post form laminated MDF board of approved shade and quality and the shutter of 12 mm thick preliminated MDF board of approved shade & quality and back with 8 mm thick prelaminated MDF board of approved shade and quality. All metal components should be finished with black epoxy powder coating of 40-50 micron (approx). Rate should include necessary approved hardware fittings of approved quality complete as per drawing and direction with all labour and materials. For type i)375/450 mm wide 1200 mm high 2 (two) number adjustable shelf.

Supplying mobile drawer unit of approved make, the facia, made of minimum 18 mm thick MDF Board with minimum 0.7 mm thick post form lamination of approved shade and quality. The top and sides made of minimum 18 mm thick PF bonded MDF board and the back will be made of minimum 8 mm thick PF bonded MDF board of approved shade and quality. The drawers are fabricated out of MS sheets and assembled with drawer, runners for smooth operation. A single central locking system of approved quality to be provided. All metal components will be finished in black epoxy powder coating of 40-50 micron (approx). Rate should be including necessary approved quality hardware fittings. All complete as per drawing and direction with all labour and materials. Size of storage unit 450/470 mm x 495/550 mm x 610/667 mm.

Supplying & fixing of approved make minimum 18 mm thick MDF Board separator/divider with minimum 0.7 mm thick high pressed post form laminate of approved shade and quality. This should be fixed with necessary hardware fittings to table and attached to the partition frame work all inclusive as per drawing & direction with all labour and materials. Size : 600 mm x 450 mm

VENETIAN / VERTICAL BLINDS :

Supplying and fixing manually operated venetion blinds of approved brand on specified area.

PLASTER AND PAINTING

Plaster (to wall, floor, ceiling etc.) with sand and cement mortarincluding rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor). (Excludingcost of chipping over concrete surface )

(i) With 1:6 cement mortar

(a) 15 mm thick plaster

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Applying interior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ acrylic emulsion paint including scraping and preparing the surafce thoroughly, complete as per manufacturer's specification and as per direction of EIC.

(a) One Coat

i) Solvent based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on wall sand ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer):(Two coats)

i) Standard Quality

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc.including using of approved putty etc. on the surface, if necessary :

(a) On timber or plastered surface :

With super gloss (hi-gloss) -

i) Two coats (with any shade except white)

b)On steel or other metal surface

i) Two coats (with any shade except white)

Arterior Infra Solutions India

LIFE STYLE INTERIORS

NUNDYS