Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.3 CrAccepted-AOC CHANDAN NAGAR OPP IOCL PERTROL PUMP RAMPUR ROAD BAREILLY UP 243001 | BAREILLY | BAREILLY | UTTAR PRADESH | 243001 | ₹3.3 Cr | L1 | Accepted-AOC Being L1 |
| 2 | L2₹3.4 Cr+₹15.1 L (4.59%)Rejected-Finance B 87 SHAM NAGAR KHAYALA ROAD NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | ₹3.4 Cr+₹15.1 L (4.59%) | L2 | Rejected-Finance Not being L1 |
| 3 | L3₹3.6 Cr+₹31.2 L (9.48%)Rejected-Finance I 910 JAHANGIR PURI NEAR BY ANAND MAYA HOSPITAL NORTH WEST DELHI DELHI 110033 UDYAM DL 06 0040830 | NORTH DELHI | DELHI | 110033 | ₹3.6 Cr+₹31.2 L (9.48%) | L3 | Rejected-Finance Not being L1 |
| 4 | L4₹3.9 Cr+₹59.8 L (18.2%)Rejected-Finance 3B CHANDRALOK APARTMENT 3RD FLOOR KUTCHERY ROAD RANCHI JHARKHAND PIN 834001 | RANCHI | JHARKHAND | 834001 | ₹3.9 Cr+₹59.8 L (18.2%) | L4 | Rejected-Finance Not being L1 |
| 5 | Rejected-Technical | - | - | Rejected-Technical Not fulfilling NIT criteria |
| Sl No | Description | Qty | Unit | BHARAT ELECTRICAL TRADERS L1 | SATISH AND CO L3 | New Era Engineers L2 | ASSOCIATED BUILDCON LLP L4 |
|---|---|---|---|---|---|---|---|
| 1.00External Water supply | |||||||
| 2.00 | Item No. 01 : Material and Labour Excavation in trenches in any kind of soil not exceeding 1.5mtr wide and not exceeding 1.5 mtr in depth for laying of pipes in trenches and getting out including levelling complete all as specified and directed. | 8,084.2 | Cum | 180 ₹14,55,156 Lowest | 250 ₹20,21,050 | 185 ₹14,95,577 | 190 ₹15,35,998 |
| 3.00 | Item No. 02 : Material and Labour Returning filling in including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick each excavated any type of soil in trenches after the pipes has been laid and tested compete all as specified and directed. | 7,799.75 | Cum | 100 ₹7,79,975 | 80 ₹6,23,980 | 20 ₹1,55,995 Lowest | 70 ₹5,45,982.5 |
| 4.00 | Item No. 03 : Material and Labour Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. | 284.45 | Cum | 60 ₹17,067 | 80 ₹22,756 | 40 ₹11,378 Lowest | 90 ₹25,600.5 |
| 5.00 | Item No. 04 : M&L for PCC 1:4:8 D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. | 2 | Cum | 5,000 ₹10,000 | 3,000 ₹6,000 Lowest | 4,500 ₹9,000 | 4,000 ₹8,000 |
| 6.00 | Item No. 05 : M&L for precast cement concrete block masonary in 1:3:6 type C1 using 20 mm graded stone aggregate with solid block exc. 10 cm width and setting in CM 1:6 complete all as specified and directed. | 2 | Cum | 5,000 ₹10,000 Lowest | 5,000 ₹10,000 Lowest | 5,000 ₹10,000 Lowest | 6,800 ₹13,600 |
| 7.00 | Item No. 06 : M & L Brickwork with fly ash modular bricks, strainght or curved on plan exc 6M mean radious radius built in Cement mortar 1:6 complete all as specified and directed. | 12 | Cum | 4,000 ₹48,000 Lowest | 5,500 ₹66,000 | 5,500 ₹66,000 | 5,500 ₹66,000 |
| 8.00 | Item No. 07 : Supply , installation and testing and commissioning chlorination chemical dosing system comprised of pressure pump & thermoplastic cylinder shape receptacle with cover Compatibility: Stequa 411 AE Refill for power free automatic water sanitiser/conditioning treatment station with proportional dosing arrangement with following attachment:-
1) Receptacle with following attachments:
a) Station Holding Assembly (b) Water Inlet Regulator (c) Overflow Vent (d) Drain valve (e) Fluid Level controller with In-built Level Switch (f) Sludge Level Gauge. (g) Station Base Assembly with Station Base Buffer. (h) Material of construction: Non-metallic thermoplastic. (i) Maximum Temperature: 45°C(j) Capacity: 100 litres. (k) Shape: Cylindrical
2) Station Hood Assembly with multi-cavity arrangement as under:
(a) Custom cover. (b) Refill Cavity Lids. (c) Electrically powered drive unit with pressure resistance up to 8 Bars. (d) Material of construction: Non-metallic. (e) Maximum Temperature: 45°C. (f) Shape: Circular. (g) Cavity Lids storage bin | 3 | Each | 1,50,000 ₹4,50,000 | 1,95,000 ₹5,85,000 | 1,45,000 ₹4,35,000 Lowest | 1,94,000 ₹5,82,000 |
| 9.00 | Item No. 08 : Supply , installation and testing and commissioning chlorination chemical dosing system comprised of pressure pump & thermoplastic cylinder shape receptacle water sanitiser/conditioning treatment station, dosing system consisting of FRP tank with lid & level gauge along with agitator and shaft & blade in plastic mounted on tank. The agitator motor must possess following specifications:
Supply - 220 +/- 10% Volts, single phase, 50 +/- 5% Hz
RPM - 1440
4 no. of 7 mm dia holes at PCD 150 mm
The accessories in the dosing system must consist of the following:
(a) Preparation tank:
(i.) Tank capacity 170ltr (ii) Water inlet line (iii.) Outlet with strainer
(iv.) Drain (v.) Overflow (vi.) Conical bottom for sludge disposal (vii.) Port hole woth cover (viii.) Level Gauge (ix.) Agitator: 120 Watts, RPM 1440, single phase flange mounted motor with plastic shaft & impeller
(b) Service Tank:
(i.) Tank capacity 100ltr. (ii.) Water inlet. (iii.) Dosing Pump mounting provision on lid / wall. (iv.) Drain. (v.) Overflow. (vi.) Level Gauge. (vii.) Inspection Port | 3 | Each | 1,20,000 ₹3,60,000 | 2,95,000 ₹8,85,000 | 1,45,000 ₹4,35,000 | 94,000 ₹2,82,000 Lowest |
| 10.00Item No. 09 : Taking up (dismantling and removing) existing cast iron (CI) water mains, including all associated fittings such as bends, tees, reducers, collars, specials, etc., having spigot and socket ends or flanged joints, including burning out / cutting and removing existing lead joints from spigot and socket connections and dismantling of flanged joints, complete all as specified and directed by Engr-in-charge, of following sizes:- Note :- Taking down of the existing pipe and laying, jointing, and connecting of the new pipe shall be carried out simultaneously on the same day to ensure uninterrupted and continuous water supply. | |||||||
Tender Value
₹3.7 Cr
EMD Value
₹4.4 L
Closing Date
28 May 2026, 6:00 pmClosed
CHIEF ENGINEER JABALPUR ZONE
CHIEF ENGINEER JABALPUR ZONE MILITARY ENGINEER SERVICES RIDGE ROAD JABALPUR CANTT 482001
AUGMENTATION OF WATER SUPPLY NETWORK ALONGWITH ALLIED WORKS AT VARIOUS LOCATIONS UNDER GE RANCHI
2026_MES_760501_1
753047A AUGMENTATION OF WATER SUPPLY NETWORK ALONGWITH ALLIED WORKS AT VARIOUS LOCATIONS GE RANCHI
Open Tender
Civil Works
Item Rate
GE RANCHI
AS PER NIT
8 documents required · 8 mandatory
₹2,000
GE Ranchi
₹4.4 L
Yes
10 Sept 2026
30 Apr 2026
4 Jun 2026
30 Apr 2026
28 May 2026
21 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | External Water supply | - | - | - | - |
| 2 | Item No. 01 : Material and Labour Excavation in tranches in soil not exceeding 1.5mtr wide and not exceeding 1.5 mtr in depth for laying of pipes in tranches and getting out including levelling complted all as specified and directed. | 8,084.2 | Cum | - | - |
| 3 | Item No. 02 : Material and Labour Returning filling in including spearing levelling, watering and well ramming in layers not exceeding 25 cm thick each excavated soft/hard soil in trenches after the pipes havew been laid and tested competed all as specified and directed. | 7,799.75 | Cum | - | - |
| 4 | Item No. 03 : Material and Labour Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. | 284.45 | RM | - | - |
| 5 | Item No. 04 : M&L for PCC 1:4:8 D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete ass as specified and directed. | 2 | Cum | - | - |
| 6 | Item No. 05 : M&L for precast cement concrete block masonary in 1:3:6 type C1 using 20 mm graded stone aggregate with solid block exc. 10 cm width and setting in CM 1:6 complete all as specified and directed. | 2 | Cum | - | - |
| 7 | Item No. 06 : M & L Brickwork with fly ash modular bricks, strainght or curved on plan exc 6M mean radious radius built in Cement mortar 1:6 complete all as specified and directed. | 12 | Cum | - | - |
| 8 | Item No. 07 : Supply , installation and testing and commissioning chlorination chemical dosing systerm comprised of pressure pump & thermoplastic cylinder shape receptacle with cover Compatibility: Stequa 411 AE Refill for power free automatic water sanitiser/conditioning treatment station with proportional dosing arrangement with following attachment:-
1) Receptacle with following attachments:
a) Station Holding Assembly (b) Water Inlet Regulator (c) Overflow Vent (d) Drain valve (e) Fluid Level controller with In-built Level Switch (f) Sludge Level Gauge. (g) Station Base Assembly with Station Base Buffer. (h) Material of construction: Non-metallic thermoplastic. (i) Maximum Temperature: 45°C(j) Capacity: 100 litres. (k) Shape: Cylindrical
2) Station Hood Assembly with multi-cavity arrangement as under:
(a) Custom cover. (b) Refill Cavity Lids. (c) Electrically powered drive unit with pressure resistance up to 8 Bars. (d) Material of construction: Non-metallic. (e) Maximum Temperature: 45°C. (f) Shape: Circular. (g) Cavity Lids storage bin | 3 | Each | - | - |
| 9 | Item No. 08 : Supply , installation and testing and commissioning chlorination chemical dosing systerm comprised of pressure pump & thermoplastic cylinder shape receptacle water sanitiser/conditioning treatment station, dosing system consisting of FRP tank with lid & level gauge along with agitator and shaft & blade in plastic mounted on tank. The agitator motor must possess following specifications:
Supply - 220 +/- 10% Volts, single phase, 50 +/- 5% Hz
RPM - 1440
4 no. of 7 mm dia holes at PCD 150 mm
The accessories in the dosing system must consist of the following:
(a) Preparation tank:
(i.) Tank capacity 170ltr (ii) Water inlet line (iii.) Outlet with strainer
(iv.) Drain (v.) Overflow (vi.) Conical bottom for sludge disposal (vii.) Port hole woth cover (viii.) Level Gauge (ix.) Agitator: 120 Watts, RPM 1440, single phase flange mounted motor with plastic shaft & impeller
(b) Service Tank:
(i.) Tank capacity 100ltr. (ii.) Water inlet. (iii.) Dosing Pump mounting provision on lid / wall. (iv.) Drain. (v.) Overflow. (vi.) Level Gauge. (vii.) Inspection Port | 3 | Each | - | - |
| 10 | Item No. 09 : Taking up (dismantling and removing) existing cast iron (CI) water mains, including all associated fittings such as bends, tees, reducers, collars, specials, etc., having spigot and socket ends or flanged joints, including burning out / cutting and removing existing lead joints from spigot and socket connections and dismantling of flanged joints, complete all as specified and directed by Engr-in-charge, of following sizes:-
Note :- Taking down of the existing pipe and laying, jointing, and connecting of the new pipe shall be carried out simultaneously on the same day to ensure uninterrupted and continuous water supply. | - | - | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
tender.pdf
Tender Documents • 4.47 MB
BOQ_854627.xls
BOQ • 0.39 MB
C2_753047.pdf
PDF • 0.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .