Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
12 Oct 2026, 4:00 pm
Sibasish Gautam
Jhabua Power Limited PO Barela Tehsil Ghansore District Seoni State Madhya Pradesh India Pin 480997
Renovation of the Existing Hall Near Panchayat Building at Village Barela for Jhabua Power Limited
2026_JPL_293000_1
JPL-CnM-LT-2026-1200008610
Limited
Civil Works
Lump-sum
90 days
Jhabua Power Limited, MP
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
Exempted
1 Oct 2026
1 Oct 2026
13 Oct 2026
1 Oct 2026
12 Oct 2026
1 Oct 2026
1 Oct 2026 - 7 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Renovation of Existing Hall near Panchyat Building Barela | |||||
| 1.01 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in : Cement mortar 1:6(1 cement : 6 coarse sand) | 5 | M3 | 100 | ₹500 |
| 1.02 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 6 | M2 | 100 | ₹600 |
| 1.03 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm | 4 | EA | 100 | ₹400 |
| 1.04 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm | 2 | EA | 100 | ₹200 |
| 1.05 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm | 2 | EA | 100 | ₹200 |
| 1.06 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | 4 | EA | 100 | ₹400 |
| 1.07 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 300 | KG | 100 | ₹30,000 |
| 1.08 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | 500 | KG | 100 | ₹50,000 |
| 1.09 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate sqm | 45 | M2 | 100 | ₹4,500 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
GeneralConditionsOfContract.pdf
Tender Documents • 1.68 MB
SpecialConditionsOfContract.pdf
Tender Documents • 0.62 MB
ScopeOfWork.pdf
Tender Documents • 0.11 MB
BOQ_341610.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .