Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹16.1 L+₹83,630 (5.49%)Rejected-AOC PLOT NO 407 HIMSHIKHA PINJORE PANCHKULA HARYANA 134102 | PANCHKULA | HARYANA | 134102 | L2 | Rejected-AOC Other then the lowest bidder | |
| 3 | L3₹17.2 L+₹2.0 L (13.2%)Rejected-AOC | L3 | Rejected-AOC Other then the lowest bidder | |
| 4 | L4₹17.8 L+₹2.6 L (16.8%)Rejected-AOC H NO 816 NEAR GANDHI CHOWK KALKA 133302 HARYANA | KALKA | PANCHKULA | HARYANA | 133302 | L4 | Rejected-AOC Other then the lowest bidder | |
| 5 | L5₹18.9 L+₹3.7 L (24.1%)Rejected-AOC 5766 AMBALA CANTT NEELKANTH ENGINEERS NICHOLSON ROAD VILLAGE TOWN PALLEDAR MOHALLA CITY AMBALA CANTT AMBALA HARYANA 133001 INDIA | AMBALA | HARYANA | 133001 | L5 | Rejected-AOC Other then the lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
COMPREHENSIVE B/R MAINT/ REPAIR TO OTM AND MD ACCN AT MIL STN KALKA UNDER GE (I) JUTOGH
2023_MES_592472_1
GE (I)/JUT-10 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
KALKA
CLASS E CATEGORY a (i)
6 documents required · 6 mandatory
₹500
GE (I) JUTOGH
₹40,000
Yes
15 Jun 2023
1 May 2023
31 May 2023
1 May 2023
29 May 2023
15 May 2023
Amount
Dismantling of brick tiles or terracing tiles of single layer on roofs, incl cleaning of bricks/ tiles and removal of unserviceable from site, incl wire brushing and cleaning the roof surface with water, incl flashings and junction of parapets, etc., complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in roof kerb or mud stops, padding on roof etc and the like and finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick or concrete surface of wall in cement mortar 1:4 mixed with water proofing compound and finish the surface even and sfair without using extra cement, complete all as specified and directed.
M&L for roof treatment by cleaning of roof slab surfaces including sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under : (a) M&L for preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @ 0.30 Ltr/sqm. (b) Supplying and laying modified polymeric water proofing membrane super thermo 3mm thick of weight not less than 3kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required. (c) Applying one coat of bitumen 85/25 @1.2 kg/sqm. (d) Applying two coats of aluminium paint @ 0.20 kg/Sqm
Supply only water proofing compound as approved complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed.
Dismantling asbestos cement (corugated or semicorrugated etc) sheets, in roof covering including ridge complete all as specified and directed.
Fixing only galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L or J type bolts, complete all as specified and directed.
M&L for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and directed.
M&L for Pre -engineered galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.
Dismantling timber scantlings ,framed/unframed work of size 40 sqcm and over in section ,in any position in any position with nails etc complete all as specified and directed.
M&L for roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'B', complete all as specified and directed.
S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and fixed with angle cleats or other connecting plates incl welding etc of grade Fe-410 (Gde E-250) quality B complete all as specified and directed.
M&L for framed work such as grills, gratings etc., with ends of bars welded shouldered or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.
S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. size of grid 605mmx605mm incl Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
M&L for 4mm thick, 600x600mm, non asbestos fibre cement building boards (self design) fixed or laid / inserted to timber/ GI/ Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.
S&F hollow PVC Lining in wall or ceiling consist of 5mm thick plain coloured PVC sheet incl of corner & end bedding solvent cement /fixing with nail at site, complete all as specified and directed.
Taking down chowkaths or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site incl dismantling brick work for hold fasts etc. complete all as specified and directed.
Taking down chowkaths or frames exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site incl dismantling brick work for hold fasts etc. complete all as specified and directed.
Taking down shutters of any description exc 1Sqm and not exc 2Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1Sqm and n.exc 2Sqm each and refixing in the same opening after repair etc complete all as specified and directed.
S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay with glazing bars, complete all as specified and directed.
S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay without glazing bars, complete all as specified and directed.
S&F steel windows or ventilators, fixed type, with glazing bars, complete all as specified and directed.
S&F 3 mm thick frosted glass, and fixed with glazing putty in squares n. exc 0.5 Sqm in each pane, complete all as specified and directed.
S&F 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed.
S&F in repair 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, incl from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F in repair 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane, incl from metal frame inlcuding punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.
S&F pressed steel frames of size 125x60 mm for doors with one or more rebates incl lugs, 125mm size, MS hinges, medium weight, lock strike plate, etc., complete all as specified and directed.
S&F pressed steel frames of size 105x60 mm for doors with one or more rebates including supply & fixing lugs, 125mm size, MS hinges, medium weight, lock strike plate etc., complete all as specified and directed.
S&F 30mm thick, flush shutter, solid core construction with block board core and plywood face panels, both faces are covered with decorative face veneer with lipping/ frame to match, complete all as specified and directed.
S&F 2nd class H.W factory made paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces the size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.
S&F 35mm thick (factory made) glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR Part-I, section-8, clause 8.24 (a) of IInd class hard wood complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet reinforced with MS square tube complete all as specified and directed.
S&F factory made solid PVC moulded door shutters 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core supplying & fixing in frame at site as per specification, complete all as specified and directed.
S&F butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22, complete all as specified and directed.
S&F Aluminium tower bolt of extruded section, 200mm length of bolt and fixed with screws, complete all as specified and directed.
S&F 125mm size, aluminium (cast type) anodized, handle and fixed with screws, complete all as specified and directed.
S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws, complete all as specified and directed.
S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate, complete all as specified and directed .
M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in filling back of pressed steel frame/ hold fast blocks etc., complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
S&F 300 mm MS ordinary rat tail rod pattern springs incl roller and roller plate fixed to wooden chowkhats or welded to angle iron door frames complete all as specified and directed.
S&F in repair 18/19mm thick prelaminated particle board, interior grade, one side decorative choice lamination other side balancing white, fixed with screws to timber frame work as in cup board shutter/ shelves etc complete all as specified and directed.
M&L in repair 12mm thick prelaminated particle board, interior grade, one side decorative choice lamination other side balancing white , fixed with screws to timber frame work as in cup board shutter/ shelves etc complete all as specified and directed.
M&L for 2nd class hard wood, plain fillet square or rectangular in section clean sawn sectional area exc 3 Sqcm and n. exc. 6 Sqcm secured with nails or barbs, complete all as specified and directed.
M&L for 2nd class hard wood, plain fillet square or rectangular in section clean sawn sectional area exc 13 Sqcm and n. exc. 25 Sqcm secured with nails or barbs, complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work with Sub class 'B' brick straight or curved on plan exc. 6m mean radius built in CM 1:6, complete all as specified and directed.
M&L for brick work with Sub class 'B' brick straight or curved on plan exc. 6m mean radius built in CM 1:6 (EXCEPT BRICKS) complete all as specified and directed.
S.R.SHARMA & SONS
JASWANT SINGH ANAND
m/s jupiter builders
Neelkanth Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .