PETTY REPAIR AND CERTAIN B/R WORK IN AGV AT AFS CHAKERI KANPUR

Amount

M&L for preparing old decorated plastered surfaces of wall, pilasters, cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed.

Ditto all as per item No 1.00 above but on ceiling complete all as specified and directed.

Taking down cement plaster or cement lime plaster of any description on bricks or stone walls etc. including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for 10mm thick plaster in CM (1:6) finished even & smooth without using extra cement in patches complete all as specified and directed.

M&L for rendering 5 mm thick plastering on ceiling in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coat of Oil bound distemper of new plastered surfaces of wall over a coat of primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for applying one coat of Oil bound distemper on walls of old surfaces including preparation of surfaces complete all as specified and directed.

M&L for applying one coat of Oil bound Distemper on ceiling of old surfaces including preparation of surfaces complete all as specified and directed.

M & L for preparation of old painted surfaces of wood or wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint to old painted Steel surfaces of any description, over 10 cm width or girth, not otherwise described including preparation of surfaces complete all as specified and directed.

M & L for complete removal of existing treatment of old treated surface and applying two coats of distemper oil emulsion over water based primer over and including 1-2 mm thick wall care putty on wall surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Non Skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15 mm thick screed bed in cement mortar 1:6 match complete all as specified and directed.

M & L for glazed coloured ceramic tiles of size 300x200x7mm or as required at site in dado skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

S & F in repair fancy type drapery curtain rod of size 25 mm bore with bracket and fancy type knob at both end of each curtain rod and cut to length as required of any colour complete all as specified and directed.

M & L for marble work 15-18 mm thick (table rubbed and polished) in cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of any shade other than white and black over and including 15mm thick in screed bed in CM (1:6) complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps cooking platefom and other similar situations complete all as specified and as directed.

Taking down door shutter exc. 1.0 Sqm but not exc.2.0 Sqm any type and re-fixing in the same opening after easying door complete all as specified & directed.

S & F in repairs Mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs stainless steel sink 1mm thick of overall size in kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.

S & F in repair 15 mm bore galvanized steel tubing, medium grade with all fittings such as bend, elbow, socket, tees including cutting, threading and making forged bends on pipes MS hooks etc. in any position ( i.e concealed) complete all as specified and directed.

Cutting chases, pinning in, in brick walls making good to facing where required and pointing in cement mortar 1:3 for concealed water tubing, cutting exc 10 cm but nt exc 20 cm girth complete all as specified and directed.

Taking down chowkhat or frame n.exc 1.50 sqm with shutters (without taking of shutter from frame ) etc. complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x47 mm made out of 5 mm thick colour, single side pre-lam PVC sheet reinforced with MS tube, fixed in opening complete all as specified and directed.

S & F 30 mm thick (style) factory made solid panel PVC door shutter consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F 150mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm long stainless steel Butt Hinges complete all as specified and directed.

S & F 125 mm long cast type anodised aluminium handles complete all as specified and directed.

S & F in repair 140 mm (over all length of cover) floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

S & F in repair 15mm bore bib taps, cast copper alloy, fancy type long shank, chromium plated with capstan, head screwed down, high pressure, screwed for iron pipe complete all as specified and directed.

S & F in repair of 125 mm size type chromium plated shower rose fancy type fixed to 15 mm bore pipe complete all as specified and directed.

S & F PVC connection 15 mm size with brass nuts of length 600 mm long complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail of 20 mm dia 'D' type 60cm long between flanges complete all as specified and directed.

Repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc. or any other minor accessories to make the system functional and if repair by the spindle complete all as specified and directed. Note : Spindel should be measured separately & paid separately.

Supply only brass spindal of any make approved by GE complete all as specified and directed.

Repairs to high / low level flushing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend including replacing of rubber washer check nuts plunges etc. for any type of flush complete all as specified and directed.

S & F in repairs 10 ltrs capacity PVC low level duo flushing cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. Make- Prayag cat Part No 502 DUO or equivalent make as approved by GE.

S & F in repairs internal flushing kit of PVC low level flushing cistern and making functional complete all as specified and directed.

S & F in repair 15 mm bore pillar taps, cast copper alloy, fancy type, chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shankes and fly nuts screwed for iron pipes complete all as specified and directed.

S & F in repair 15mm bore stop valves cast copper alloy fancy type chromium plated screwed down high pressure with capstain head crewed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 32 mm dia waste coupling of PTMT half or full threaded (min wt 45 gram) complete all as specified and directed.

S & F in repairs CP waste coupling for steel sink complete all as specified and directed.

S & F in reapirs 32 /40 mm PVC waste pipe for sink / WHB complete all as specified and directed.

S & F in repair 125 mm/ 150mm dia mild steel chromium plated grating fixed on floor in CM (1:6) conforming to SI- 2722, 2723 complete all as specified and directed.

S & F in repair vitreous china wash basin, white, round back of size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets complete all as specified and directed.

S & F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union reducer etc. for 15mm bore pipe complete all as specified and directed.

Taking down shutters from the frames exc 1.0 sqm but n. exc 2.00 Sqm each complete all as specified and directed.

S & F 35mm thick factory made glazed and skelton shutters open rebated sand prepare to receive glass/gauge etc. without sash bars, edges of framing plain chamfered or rounded, fitted without mitred beads for securing glass etc. size of members of shutters as specified in SSR Part I, Sec 8 clause 8.24 (a) of IInd class HW complete all as specified and directed.

S & F 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc. 10cm width or girth complete all as specified and directed.

S & F 200 mm long mild steel barel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F 300 mm helical door spring black Japan including roller and roller plate welded in MS door frame complete all as specified and directed.

S & F 150 mm size butt hinges medium weight cold rolled mild steel welded in MS door frame complete all as specified and directed.

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S & F in repair length of bolt 200 mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

Ditto all as per item no 59.00 above but length of bolts 150 mm

Ditto all as per item no 59.00 above but length of bolts 100 mm

S & F in repairs extruded aluminium alloy handles fabricated type 150 mm size complete all as specified and directed.

Ditto all as per item no 62.00 above but for size 100 mm

Hacking out old broken glass (any size, quality or description) from steel frames glazed complete all as specified and directed.

S & F 3 mm thick sheet glass figured or plane as per site requirement ordinary quality and glazing with oil putty or wooden beads in squares of any shape and size complete all as specified and directed.

S & F in repair GI tubing 32 mm bore medium grade with all fittings and fixtures to wall or laid in floor complete all as specified and directed. (UPTO 4TH STOREY)

S & F in repairs GI tubing 32 mm bore medium grade with all fittings and fixed to wall or laid in floor complete all as specified and directed. (FROM 5TH TO 8TH STOREY)

S&F in repairs GI tubing 32 mm bore medium grade with all fittings and fixed to wall or laid in floor complete all as specified and directed. (FROM 9TH TO 11TH STOREY)

S & F in repairs GI tubing 50 mm bore medium grade with all fittings fixtures to wall or laid in floor complete all as specified and directed. (FROM 9TH TO 11TH STOREY)

S & F in repair gun metal globe or gate valve for 32 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and directed.

S & F in repair gun metal globe or gate valve for 50 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and directed.

S & F in repairs 15 mm stop valves (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Demolition of cement concrete not exceeding 15 cm thickness, below or above ground level of any description complete all as specified and directed.

M & L for providing PCC (1:2:4) Type B-1 using 20mm graded stone aggregate mixed with water proofing compound as in sunken floor and finished the surfaces fair and even complete all as specified and directed.

M & L for 25 mm thick plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggt) as in sub base of floor etc. finished surface fair & even complete all as specified and directed.

M & L for rendering 20 mm thick in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even using extra setting coat and mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately)

Supply only for Liquid water proofing compound Make Pidilite or equivalent as approved by GE, mix 200ml in 50 Kg cement or as per manufacturer's instruction.

S & F 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc. complete all as specified and directed.

S & F vitreous China squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe, etc. including making good to floor excluding flushing cistern and flush pipes complete all as specified and directed.

S & F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor excluding flushing cistern and flush pipes complete all as specified and directed.

S & F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and directed.

S & F in repair plastic water closet seat cover white /colour closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges devices complete all as specified and directed .

Taking down cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings / pipes laid in tranches floors or fixed to walls including earth work, demolition of PCC / Brick work complete all as specified and directed for following size of pipes:-

100 mm bore pipe.

50 mm bore pipe.

S & F cast iron sand cast soil waste or vent pipes in any length with or without ears with cement joints laid in trenches, floors or fixed to walls including making good to match with existing surface complete all as specified and directed for following size of pipe:-

100 mm bore pipe.

50 mm bore pipe.

S & F 100 mm bore cast iron branches pieces( tee, cross & 'Y' shapes) & oval access doors, with cement joint, fixed on walls complete all as specified and directed.

S & F 50mm bore cast iron branches pieces( tee, cross & 'Y' shapes) & oval access doors with cement joint, fixed on walls complete all as specified and directed.

S & F 100 mm bore cast iron cowl, with cement joint, fixed on walls complete all as specified and directed.

S & F 50 mm bore cast iron cowl, with cement joint, fixed on walls complete all as specified and directed.

S & F 300 mm long MS sliding door bolts stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts (four on bolt plate and two on staple plate) complete all as specified and directed.

S & F in repair 300 mm long bolt type MS sliding door bolts stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts (four on bolt plate and two on staple plate) complete all as specified and directed.

M & L for repair to chajja area n exc 1 sqm each including plaster in CM(1:3) or PCC type B0 (1:2:4) (using 12.5 mm stone aggregate) on top mixed with and including WPC, benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed. (Upto 4th storey)

M & L for repair to chajja area n exc 1 sqm each including plaster in CM(1:3) or PCC type B0 (1:2:4) (using 12.5 mm stone aggregate) on top mixed with and including WPC benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed. (FROM 5TH TO 8TH STOREY)

M & L repair to chajja area n exc 1 sqm each including plaster in CM(1:3) or PCC type B0 (1:2:4) (using 12.5 mm stone aggregate) on top mixed with and including WPC benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed. (FROM 9TH TO 11TH STOREY)

P.N. BROTHER