REPAIRS RENEWAL OF LT PANEL BOARD, LT FEEDER PILLAR BOX, EARTHINGS, LT UG CABLE AND ALLIED WORKS AT AOC CENTRE, 454 FD HOSPITAL, AOC RECORDS, 54 DOU, 60 COY SUPPLY DEPOT AREA UNDER AGE EM NO-II OF GE U SECUNDERABAD

Amount

Design Fabricating supply and errecting connecting and testing totally enclosed out door type Feeder piller Box, 3 Phase 4 wire system outdoor type, double door front and back opening type, sloped canopy (Hood) on top extended 100mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 185 Sqmm 3.5 core in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15 mm thick CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre-wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:2:4, type C-2, 45 Cm below ground level and 45 Cm above ground level and consisting the folowing at AOC Record near Mandir :-

Design Fabricating supply and errecting connecting and testing totally enclosed out door type Feeder piller Box, 3 Phase 4 wire system outdoor type, double door front and back opening type, sloped canopy (Hood) on top extended 100mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 185 Sqmm 3.5 core in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 4 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre-wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:2:4, type C-2, 45 Cm below ground level and 45 Cm above ground level and consisting the folowing at MDC near Transformer :-

Design Fabricating supply and errecting connecting and testing totally enclosed out door type Feeder piller Box, 3 Phase 4 wire system outdoor type, double door front and back opening type, sloped canopy (Hood) on top extended 100mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 185 Sqmm 3.5 core in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 6 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre-wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:2:4, type C-2, 45 Cm below ground level and 45 Cm above ground level and consisting the folowing at AOC 1 TB near Qtr Guard :-

Design Fabricating supply and errecting connecting and testing totally enclosed out door type Feeder piller Box, 3 Phase 4 wire system outdoor type, double door front and back opening type, sloped canopy (Hood) on top extended 100mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 185 Sqmm 3.5 core in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 5 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre-wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:2:4, type C-2, 45 Cm below ground level and 45 Cm above ground level and consisting the folowing at Ord line Md Accn Near P-88 Bldg Transformer :-

Design Fabricating supply and errecting connecting and testing totally enclosed out door type Feeder piller Box, 3 Phase 4 wire system outdoor type, double door front and back opening type, sloped canopy (Hood) on top extended 100mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 185 Sqmm 3.5 core in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 5 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre-wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:2:4, type C-2, 45 Cm below ground level and 45 Cm above ground level and consisting the folowing at 54 DOU Near JCO Mess Transformer and Near CSD Transformer :-

(a) Bus bar aluminium duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic, non combustible, track resistant high strength FRP insulators 400 Amps for phases and 150 Amps for Neural, set of 4 for RYB &N - 01 set. (b) MCCB 4 Pole 415 Volts 50 Hz 315 Amps, breaking capacity 35 KA, Adjustable type - 01 No (As Incoming) conforms to IEC : 60947-II, Make : Standard HSN Code : 8536 Cat Part No ISLCNF0250 and equivalenrt Havells/C&S/L&T (c) MCCB 4 Pole 415 Volts 50 Hz 250 Amps, breaking capacity 25 KA, Adjustable type - 01 Nos (As out going) conforms to IEC : 60947-II, Make : Standard HSN Code : 8536 Cat Part No ISLANF0250 and equivalenrt Havells/C&S/L&T (d) MCCB 4 Pole 415 Volts 50 Hz 200 Amps, breaking capacity 25 KA, Adjustable type - 01 Nos (As out going) conforms to IEC : 60947-II, Make : Standard HSN Code : 8536 Cat Part No ISLANF0200 and equivalenrt Havells/C&S/L&T (e) MCCB 4 Pole 415 Volts 50 Hz 125 Amps, breaking capacity 25 KA, Adjustable type - 01 Nos (As out going) conforms to IEC : 60947-II, Make : Standard HSN Code : 8536 Cat Part No ISLASF00125 and equivalenrt Havells/C&S/L&T

Design Fabricating supply and errecting connecting and testing totally enclosed out door type Feeder piller Box, 3 Phase 4 wire system outdoor type, double door front and back opening type, sloped canopy (Hood) on top extended 100mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 185 Sqmm 3.5 core in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 4 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre-wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:2:4, type C-2, 45 Cm below ground level and 45 Cm above ground level and consisting the folowing at 54 DOU Near Main office :-

Design Fabricating supply and errecting connecting and testing totally enclosed out door type Feeder piller Box, 3 Phase 4 wire system outdoor type, double door front and back opening type, sloped canopy (Hood) on top extended 100mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 185 Sqmm 3.5 core in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 5 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre-wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:2:4 , type C-2, 45 Cm below ground level and 45 Cm above ground level and consisting the folowing at AOC Thaper Stadium near bldg :-

Design Fabricating supply and errecting connecting and testing totally enclosed out door type Feeder piller Box, 3 Phase 4 wire system outdoor type, double door front and back opening type, sloped canopy (Hood) on top extended 100mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 185 Sqmm 3.5 core in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 5 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre-wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:2:4, type C-2, 45 Cm below ground level and 45 Cm above ground level and consisting the folowing at ABC Line ORs Md Accn Block P-24 to 34 :-

Design Fabricating supply and errecting connecting and testing totally enclosed out door type Feeder piller Box, 3 Phase 4 wire system outdoor type, double door front and back opening type, sloped canopy (Hood) on top extended 100mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 185 Sqmm 3.5 core in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 5 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre-wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:2:4, type C-2, 45 Cm below ground level and 45 Cm above ground level and consisting the folowing at GL JCO Md Accn Block P-210 to 218 :-

Notes for Sl no 1 to 9 : (i) All Internal connection between MCCB and Changeover and Bus bar shall be connected by aluminium strip of suitable size and capacity. (ii) All MCCB to be connected with both side Spreader Link. (iii) Sufficient space to be provided for cable connection between MCCB and Bottom of the panel board. (iv) Provn of cable tray to be provided both side of the panel board for connection of Outgoing cable.Outgoing cable should not be connected to MCCB direcrly . (v) All serviceable MCCB in existing panel board are the property of the department and to be aken on changrge and used for day to day maintanance by the deptt. The rate shall deemed to be include in the item rate.

Cutting the existing road/PCC floor straight by manual, depth not less than 1 mtr below ground level and 45 Cm width for passing of underground cable and filling back with excavated soil up to 75% road portion and 25% shall be made with cement concrete 1:2:4 (using 20 mm graded aggregate stone complete all as specified and directed.

Supply and laying GI tubing light grade of size 50 mm for cable protection on road/drain/floor/pole including necessary clamps 40x4mm. Make : TATA/Jindal/Prakash with ISI marked.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 35 Sqmm, 3.5 core incl connecting and testing, complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 70 Sqmm, 3.5 core incl connecting and testing, complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10 Sqmm, 4 core incl connecting and testing, complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 50 Sqmm, 3.5 core incl connecting and testing, complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 120 Sqmm, 3.5 core incl connecting and testing, complete all as specified and as directed. Notes for item No 12 to 16 : (i) Earthwork, cable protection, pipe etc shall be measured and paid for separately under relevant items.(II) Retrived serviceable bricks/ PCC cover shall be reused under relevent item)

Taking out and Relaying of LT cable of size10 sq mm to 50 Sqmm 2/3.5/4 core after carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugs all as specified and directed by ingr in charge.

Taking out and Relaying of LT cable of size70 sq mm to 300 Sqmm 3.5 core after carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugs all as specified and directed by ingr in charge .Notes for item No 17 and 18: (a) Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item (b) Retrived serviceable bricks/ PCC cover shall be reused under relevent item)

Relaying of serviceable bricks / pcc cover of any size retrived during taking out of cable complete all as directed

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation of PCC/Steel pole, laying of cable in trenches etc and getting out in Hard / Dense soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed.

Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L filling sand in trenches for sand cushioning of laying of cables to the full width of excavated trench 8 cm thick before laying the cable and 15 cm above the cable, gently punned down, stretching and testing of cable on transformer yard etc complete all as specified and directed. Note :- Thickness of sand cushion after punning down (i.e 18 cm) shall be measured for payment.

Supply and Laying bricks, common burnt clay building bricks, sub class 'B' of old size 230 x 115 x 75 mm laid across in trenches for cable protection complete all as specified and directed.

All as per item No.25 above, but single phase load of 12 KW with Circuit wiring min 25 sq mm 3 nos contactor each of 20-25 amps incoming outgoing MCB (3 nos) rating 20-25 amps Make:-Model No. Swadeep-02EC12kW1P or equivalent make as approved. Note for item No 25&26 :- (i) The contractor shall be obtained 1year gurranty and 1 year warranty for the sensor and 1 year warranty for the other accessories from the manufacturer and submitted to the deparment duly signed by all concerned.

Supply, fixing, connecting and testing for advance maintenance free G.I. SAFE EARTHING electrode with PIPE of not less than 50 mm outer dia (Thickness not less than -2.5mm) and two meter length, the electrode should be of galvanised (80 -100 micron) along with earth lead as galvanised steel strip of size 32X6 mm, 7.5 m length. The GI Electrode shall be pre-filled with Cristalline Conductive Material (CCM) having anti corrosive and conductive properties to provide annular space of earth electrode and the GI electrode shall be surrounded with 25 kg Back fill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-friendly and having RoHs certification. GI Electrode Shall be tested from CPRI, signed by all concerned and kept on record and including excavation, earth work, PCC pit, RCC cover 50 mm thick of size 450 x 450 mm using 8mmdia deformed bars @ 150mm c/c, lifting handle rod 8mm dia, GI protection pipe 40 mm dia light grade for protection of inter connecting earthing strip from mechanical protection and testing on completion, as in replacement complete all as specified and directed. Make:- ASHLOK / INDELEC/ JMV / TERCEL. Notes :- (i) The quoted rate is deemed to be included earth work in any type of soil, removal of surplus soil from site, test link for test point, necessary sadling and mounting of GI strip on walls complete. (ii) The length of GI strip beyond 7.5 mtrs shall be measured and paid seperately. (iii) Workmanship shall be carried out in accordance with guide lines of OEM for installation and commissioning and the certificate from concerned OEM to this effect shall be obtained and submitted to the GE.

Notes :- (i) The quoted rate is deemed to be included earth work in any type of soil, removal of surplus soil from site, test link for test point, necessary sadling and mounting of GI strip on walls complete. (ii) The length of GI strip beyond 7.5 mtrs shall be measured and paid seperately. (iii) Workmanship shall be carried out in accordance with guide lines of OEM for installation and commissioning and the certificate from concerned OEM to this effect shall be obtained and submitted to the GE.

Supply, lay, test and commissioning of twin core 1100 volt grade aluminium service wire cross sectional area 4.0 Sqmm for connection of lights as in repairs complete all as specified and directed

Supply, lay, test and commissioning of twin core 1100 volt grade aluminium service wire cross sectional area 6.0 Sqmm for connection of lights as in repairs complete all as specified and directed

S&F contactor 3 phase 415 volts 50 Hz of ML-2, 32 Amp rating, coil voltage 420 volts, fitted inside steel enclosure complete all as specified and directed. Make : L&T cat No SS90701 or equivalent of Legrand/Indoasian.

Supply, fabrication, installation connection and testing of Feeder Pillar box outdoor type of size 0.75 m (L) x 0.6 m (W) x 0.4 m (D) (totally enclosed type) with canopy made out of 3.15 mm thick CRCA sheet with copper busbar of capacity 300 Amps with colour sleeve (RYB & N) = 04 No's with suitable size of PVC copper conductor thimbles glands for connections with angle iron 40 x 40 x 6 mm frame work allround having double hinged double door shutters on front and back with MS sliding bolts - 250 mm long for locking arrangement. The base of the feeder box shall be provided at 0.60 m above the ground level 4 Nos angle iron legs made from angle iron 50 x 50 x 6 mm shall be embedded on PCC 1:2:4 type B1 300 x 300 x 300 mm with depth below the ground level. The feeder pillar box shall be painted with two coats of synthetic enamel paint powder coated over a coat of red oxide zinc chrome primer complete internally & externally including disconnecting/taking out old existing unsv FP box complete all as specified and directed.

(a) Bus bar aluminium duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators 250 Amps for phases and 150 Amps for Neural, set of 4 for RYB &N - 01 set. (b) MCCB 4 Pole 415 Volts 50 Hz 100 Amps, breaking capacity 25 KA, Adjustable type - 01 No (As Incoming) conforms to IEC : 60947-II, Make : Standard HSN Code : 8536 Cat Part No ISLCNF0100 and equivalenrt Havells/C&S/L&T (c) Control wiring with PVC insulated multi stranded copper conductor, insulators for busbar mounting 3 Nos of suitable CT's and accessories

Supply and connect LT 1100 V outdoor type cable end termination heat shrinkable joint kit suitable for the size 3.5 core x 25/35 sqmm. with necessary jointing materials complete all as directed by Engr-in-charge. Make :- M-SEAL/ DENSON/3-M/ RAYCHEM

All as per Item No.32 above but for the size 3.5 core x 70/95 sqmm.

All as per Item No.32 above but for the size 3.5 core x 120/150 sqmm.

All as per Item No.32 above but for the size 3.5 core x 185/240 sqmm.

All as per Item No.32 above but for the size 3.5 core x 300/400Sqmm

Supply and connect LT 1100 V outdoor type cable straight through heat shrinkable epoxy joint kit suitable for the size 3.5 core x 25/35 sqmm. with necessary jointing materials complete all as directed by Engr-in-charge. Make :- M-SEAL/ DENSON/3-M/ RAYCHEM

All as per Item No.37 above but for the size 3.5 core x 70/95 sqmm.

All as per Item No.37 above but for the size 3.5 core x 120/150 sqmm.

All as per Item No.37 above but for the size 3.5 core x 185/240 sqmm.

All as per Item No.37 above but for the size 3.5 core x 300/400 Sqmm

Isolate, disconnect, dismantle the burnt out lugs from main switches/MCCB/ACB/Breakers and Supply &fix new lugs with crimping tool as per existing one including fixing, insulation, termination tomain switches/MCCB/ACB/Breakers for the following sizes of cables complete all as directed by Engr -In-Charge. Note : cleaning the cable termination ends insulation as required length and fixing new lugs as per size including well crimping to the lugs for both ends of cable complete are included in quoted rates.

25 sqmm to 50 sqmm

70 sqmm to 95 sqmm

120 sqm to 240 sqmm

300 sqmm to 400 sqmm

up to 16 Sqmm

Supply,test,install & commsissioning of Bus bar chambers(including 4 bus bars i.e R,Y,B and neutral),3-Ph with netral,1100volts,50Hz including suitable sheet metal enclosure along with necessary screws,nuts,bolts and other Misc accessroies and making connections(input &out put) with cable terminal ends complete for the following current carrying capacities (a)4-Way, 100 Amps Make: Havells/L&T/Standard

Supply,test,install & commsissioning of Bus bar chambers(including 4 bus bars i.e R,Y,B and neutral),3-Ph with netral,1100volts,50Hz including suitable sheet metal enclosure along with necessary screws,nuts,bolts and other Misc accessroies and making connections(input &out put) with cable terminal ends complete for the following current carrying capacities (a) 4-Way, 250 Amps Make: Havells/L&T/Standard

Framed work Mild steel framed work with angle iron frame for mounting Light fittings in four sides including including necessary welding, bolts, washer and painting exposed surfaces with two coat of synethic enemal paint over one coat of Red oxide primer all as specified and directed by Engr-in-Charge

Supply and fixing of PVC Junction box of size 300x200x100mm, light weight pole mounting including MCB 4P 10Amps -1 No including necessary clamp MCB mounting and mounting of Box on pole with MS flat frame arrangement and necessary connector for looping in and looping out cable connection and suitable glands complete all as directed by Engr-in-charge. Make :- SINTEX/Polycon

Supply, install, test, calabrate and commssioning of AC Three Phase LT-CT Multifunction Energy meter of Accuracy Class 0.5, 3 X 240V, 50Hz With Optical & RS232 Port,Backlit LCD Display, Measures & Displays Trivector Energy, Load survey, TOD,Tamper detection & logging,Power On/Off Events, instantaneous parameters of Rating -/5A with display in absence of power including connection of CT coil in all three phases and suitable size hinge type transperent poly carbonate made box,neccesary sealing arrangement complete all as directed by Engr-in-Charge. Make HPL Cat No.TLPB2823130000OCA0 or its techno commerical equivalent in L&T

Supply and fixing of current transfromer 100/5Amps,5VA Class-0.5 accuarcy along with CT shoot terminals including terminations & making connections to metering equipment complete all as directed . Make: Srestaa/Newtek.

M&L preparing Steel and Iron Surfaces of any description, over 100mm width or girth and applying One Coats of Synthetic Enamel Paint (First quality) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for boring of horizontally holes under the road below 1.5 mtr from the road/hard surface by trench less technology using ultra sound technique and including necessary machine without damaging the existing road and getting out in any type of soil and disposal of soil to a distance not exceeding 50m from the site of work including supply & laying DWC HDPE pipe up to 150 mm dia suitable for 0.4 MPA work pressure.

Supply and spread grade stone aggregate 40 mm in structure yard of 2/4 poles complete all as directed by Engr-in-charge.

Supply and spread grade stone aggregate 20 mm in structure yard of 2/4 poles complete all as directed by Engr-in-charge.

Servicing of capacitor panel of size not less than 20 KVAR complete including testing all components including relay, capacitor, contactor, operating coil of contactor , mcb wiring etc complete all including making the panel serviveable complete all as directed. ( Spares toshall be measured and paid separately under relevent items)note : rate quoted by the contactor is inclusive of complete engineering charges to check and identyfy the faulty components and reason of malfunctioning

Phase indicating lamp(Set of three) LED Type for indicating of three phase RYB in color suitable for 230 volt supply.

Powerfactor meter analog type complete all as specified and directed . Make : L&T Model No: 76135 /AE

Frequency meter 47 to 52 Hz analog type complete all as specified and directed . Make : L&T Model No: 23311/AE

Three phase power capacitor heavy duty BOX TYPE RESIN FILLED OF RATINGS 5 kVAR 440 Volt 50 Hz complete all as specified and directed. Make L&T part No: LTBCH305B2/EQUIVALENT OF HAVELLS/EPCOS

Three phase power capacitor heavy duty BOX TYPE RESIN FILLED OF RATINGS 10 kVAR 440 Volt 50 Hz complete all as specified and directed. Make L&T part No: LTBCH310B2/EQUIVALENT OF HAVELLS/EPCOS

Three phase power capacitor heavy duty BOX TYPE RESIN FILLED OF RATINGS 15 kVAR 440 Volt 50 Hz complete all as specified and directed. Make L&T part No: LTBCH315B2/EQUIVALENT OF HAVELLS/EPCOS

Three phase power capacitor heavy duty BOX TYPE RESIN FILLED OF RATINGS 25 kVAR 440 Volt 50 Hz complete all as specified and directed. Make L&T part No: LTBCH325B2/EQUIVALENT OF HAVELLS/EPCOS

Capacitor duty contactor suitable for 8kVAR,400 volt,3 phase,50 Hz, coil operating voltage 230 volt complete all as specified and directed. Make: L&T PART NO: ST41807/equivalent from havells/CG

Capacitor duty contactor suitable for 12.5 kVAR,400 volt,3 phase,50 Hz, coil operating voltage 230 volt complete all as specified and directed. Make: L&T PART NO: ST41808/equivalent from havells/CG

Capacitor duty contactor suitable for 15 kVAR,400 volt,3 phase,50 Hz, coil operating voltage 230 volt complete all as specified and directed. Make: L&T PART NO: ST41809/equivalent from havells/CG

Capacitor duty contactor suitable for 25 kVAR,400 volt,3 phase,50 Hz, coil operating voltage 230 volt complete all as specified and directed. Make: L&T PART NO: ST41810/equivalent from havells/CG

commissioning of Eight stage APFC relay including necessary addl/alt to internal wiring to the APFC Panel complete all as specified and directed. Model No : RPM 8 of MAKE: L&T/ Equivalent in other makes as specified.

MCB TP 16 Amps 10kA "C" Curve in replacement complete all, as directed

MCB TP 32 Amps 10kA "C" Curve in replacement complete all, as directed

MCB TP 63 Amps 10kA "C" Curve in replacement complete all, as directed

M&L for Single Side Painted flex gloss sign board fabrication with 20mm dia mild steel Square hallow pipe frame and four side and back side in covered with 23mm gauge plain galvanized sheets incl wiring latter diagram photography and making design covering the front surface as directed by Engr-in-Charge including necessary electrical connection complete and dismantling existing old one for the following size are given below.

Size of the Board 2400x900x150mm including 6 no strip itype tubelight fittings

Size of the Board 2400x1200x150mm including 6 no strip itype tubelight fittings

S&FMCCB box made of sheet of 2mm thick size 300X200X100 mm Powder coated Suitable for fixing at Pole including two set of clamps comprising with the following i) MCCB 40 Amps 16 KA TP WITH BOTH SIDE SPREADER LINK.

Supply of Rubber mat ISI marked of size 1000X2000X20mm

S&F Junction box box made of sheet of 2mm thick size 250X250X150 mm Powder coated Suitable for fixing at Pole including two set of clamps comprising with the following i) MCB SPN 20Amps 10 KA- 01 nos , ii) MCB SP 10 Amps - 4 Nos iii) Connecter 5 way 20 amps for neutral tappings complete all including internal connection done by using Suitable size of copper wire complete all as specified and directed.

Supply and Replace Changeover Switch 100 Amps TPN ON load type 415 Volt with side handle. Make: Havells/L&T/HPL

Supply and replace spreader link suitable for 63/100 amps MCCB complete all as directed

Supply and replace spreader link suitable for 125/160 amps MCCB complete all as directed. Make must be competable for site requirement

Supply and replace spreader link suitable for 160/200 amps MCCB complete all as directed.Make must be competable for site requirement

Supply and replace spreader link suitable for 250/315 amps MCCB complete all as directedMake must be competable for site requirement

Supply and replace spreader link suitable for 400/630 amps MCCB complete all as directedMake must be competable for site requirement

Supply fixing connecting and testing LED Post top lantern of 35 watt capacity with diffuser and painted aluminium deflector including nut, bolts, washers, clamps etc complete all as specified and directed by Engr -in-charge Make surya Cat Part No SLEPT 40 W ETPP or CG MODEL NO LPTO 40 CDL equivalent from havells/wipro

Supply and fix for switch disconnector fuse unit TPN 415 Volt 63 Amps without Enclosure fixed in existing panel board including making necessary arrangements and dismantling old one complete all as specified and directed

Supply and fix for switch disconnector fuse unit TPN 415 Volt 100 Amps without Enclosure fixed in existing panel board including making necessary arrangements and dismantling old one complete all as specified and directed

Supply and Fix Solar LED street light 90 watt ( Min output 2400 Lumen and active power 30 watt) complete all as specified and directed. Make Luker model Number LSTSOL 90 / equivalent from havells/Surya

L and S ENTERPRISES

The Deccan Engineering and Refrigeration Company

STANDARD AGENCIES

SANJEEV CONSTRUCTIONS