GE 874/EWS-64/2023-24

Amount

BR and EM Portion

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete.

Demolition of reinforced cement concrete, ( ground floors), shelves, slabs and similar work carefully and matching to adjoining disturbed surfaces all as directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding complete.

Demolition of brick work built in cement mortar of any description.

Dismantling wall and ceiling boards ( fibre, pulp, insulation, etc) or insulation ards/slabs/blankets, any thickness including cover fillets. all as specified and directed by Eng-in-charge.

M & L for 6 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame with nails in ceiling complete all as specified and directed by Eng-in-Charge

M & L plain fillets.square, rectangular or triangular in section exc 6 Sqcm & n.exc 13 Sqcm, clean sawn, secured with nails or brads complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in 75 mm thick sub base for floor finieshes all as specified abd directed by Eng-in-Charge

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the including rubbing and polishing incl 20mm thick screed bed in CM 1:6 complete

M & L for Ist or premium or standard quality of glazes, ceramic “coloured” tiles of premium or first quality of size 350x250x7/450x350x7 mm thick as in vertical surfaces such as skirting/dado, and riser to steps etc, set & jointed in neat cement to match the shade of tiles complete

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified

M & L for 15 mm thick rendering on other fair faces of brick work or concrete surfaces in CM 1:6, rendering finishes even and smooth (without using extra cement) complete all as specified

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

M & L for Second class clean sawn soft-wood in scantlings unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Eng-in-charge.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre- painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

Aluminium sliding three track window with powder coated aluminium (minimum thickness of powder coating 50 micron) frame of aluminium section 62.5mm x 37mm x 1.5mm thick with shutters having style and rails of aluminium section 47.62mm x 44.45mm x 1.5mm thick including joining cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fiitings such as hinges, tower bolts, handle etc., including 5.5 mm thick sheet glass, complete all as specified and directed.

M & L for 15mm bore, steel water tubing medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floor in repairs complete all as specified and directed.

S & F 15mm bore CP bib taps fancy type long body, half/full turn, screwed down for iron pipes complete all as specified

S & F in repair rotational moulded polyethylene water storage tanks capacity of 2000 ltr (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and drected.

S & F Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete allas specified and directed

M & L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in chajjas/shelves complete all as specified & directed.(Reinforcement to be measured separately).

Mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

S&F 18 mm thick solid PVC board one side prelam sheet colour (Saluca sheet) of Make : Rajshree or equivalent all as specified and approved by Accepting Officer laminated with suitable cement solvent adhesive for shutter/ kitchen cabinet/ cup-boards/ partition wall/ wall cabinet and similar complete.

S & F 100 mm double action spring hinge, mild steel with steel wire spring, stove enamelled bloak all as specified and directed.

S&F aluminium handles 125 mm size cast type, anodised complete

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms) complete all as specified and directed. Make : Prayag/Poly tuff/ Pearl or equivalent

M & L for PCC 1:4:8 type D2 (40 mm graded aggregate) as in foundation filling and mass concrete

M & for PCC 1:2:4 type B1 (40 mm graded aggregate) as in surface channels and drains complete all as specified and directed

Extra for forming fair finished drain or channel 30cm inner girth in cement cocrete using extra cement including forms moulds, mitred /stopped ends etc complete all as specified and directed.

Cement concrete 1:2:4 type B1 (using 20 mm graded agg) as in coping including form work complete all as specified and directed.

S & F granite 20-25 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

Vitrified Ceramic tiles (Light shade) 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match along with screed bed CM (1:6) complete all as specified.

S&F E-Board Ceiling 600mmx600mm semi perforated coloured armstong tiles not less than 9mm thick with GI syspended system as in false ceiling .

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed

M&L of Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished the surface even and smooth without using extra, complete all as specified.

Supply & fix 6mm Plywood, grade BWP, type BB fixed with nails to timber frame complete.

Taking down Chowkhats or frames but n exc 1.5 sqm each with shutters (without taking off shutters from the frame)

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame)

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Anodised aluminium doors shutters, aluminium section weighing .55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminium snap beading screws etc. complete all as specified.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Sheet glass, 5.5 mm ordinary quality and glazing with oil putty in square, but exc 0.5 sqm in each pane complete.

M&L for old prepared surface two coat of oil bound distemper complete all as specified.

M&L for old prepared surface two coat of cement paint complete all as specified.

M&L for new prepared surface two coat of oil bound distemper complete all as specified.

M&L for new prepared surface two coat of cement paint complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified.

S&F Sheet glass, 3 mm ordinary quality and glazing with oil putty in square, but not exc 0.5 sqm in each pane complete.

M&L for RCC Nominal Mix Type B1 1:2:4 (20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L Mild Steel TMT Bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigments and incl over 15mm thick screed bed in CM 1:6 etc as approved etc.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil

Excavation in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified.

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface of broken stone or boulders.

M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L Damp prrof course in PCC 1:2:4 type B-0 to horizantal or vertical surfaces including formwork using WPC as per manufacturers instructions complete all as specified and directed.

Supply only Integral water proofing compound.

M & L rendering 5mm thick on ceiling surfaces in CM 1:3, complete all as specified.

Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complte all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs landing and similar work not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.

Reinforced cement concrete (nominal mix) type B1 (1:2:4) (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc all as specified.

M&L for Three coats of white wash on newly plastered surfaces of wall including preparation of surfaces, complete all as specified and directed.

All as per item above but on ceiling complete all as specified and directed.

S&F 15mm Bib tap standard of PTMT any colour high pressure screwed down for iron pipe (min wt 90gm) complete all as specified and directed.

M&L for CI nahani trap 75mm dia with grating including each joint to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

S&F 15mm bore stop valve, cast copper alloy, chromium plated fancy type screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed ,complete all as specified and directed.

S&F Ball brass valves , high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F Nipple suitable for HDPE water tank (Min weight 15mm-38gms/20mm- 45 gms/25mm-65gms).

Non-skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of ech tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of farme made out of MS tubes for top &N bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for colour PVC sheets foir top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F Rotational moulded polythene 500 ltr water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection with cast iron P trap and flushing pipe, including PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting with provision of lime concrete bedding complete all as specified and directed.

S&F Vitreous China urinals half stall (back or corner wall type),complete incl. providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe

S & F vitreous china wash basin,white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap fancy 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door

S&F PVC Connection 15mm size PTMT Nut of length 600mm.

S&F waste pipe coupling of PTMT (Half or full thread). (minimum weight 32mm-45gms/40gm-60gm)

M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement

S&F PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.

M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe all as specified.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)

M & L Cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection,75 mm thick, complete all as specified and directed.

M&L Rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete

S&F butt hinges, 100 mm size medium weight, stainless steel complete

M&L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.11sqm but n.exc 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and layed over 15mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floor finishes

S&F Mild Steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Grade Fe 410 -W (GdeE- 250) quality A.

S&F 20mm water tubes, ‘medium grade’ galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

S&F in repairs vitreous china wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device complete. Note : Plastic seat cover shall be measured separately as Supply only as considered under respective items.

S & F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F Vitreous China wash basin with pedestal , white, flat back, size 630x450mm including 32 dia waste pipe, waste coupling, chain and plug and porcelain stopper and brackets

S&F 15mm Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F 15mm fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal

M&L for preparation of new steel surface of any description,over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over red oxide, zinc chrome primer

Excavation over areas n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc .50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers nt exceeding 25cm and getting out in soft/loose soil complete all as specified and as directed.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less including form work complete all as specified and as directed.

Mild Steel work in Roof trussed (framed) purlins crane guntries rail & fastening and heavy bracket (beam tea angle chanel or flat section) incl distance pieces cleats etc complete all as specified and as directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and as directed.

Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.

Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end.

Point wiring for 5 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end.

All as per item above but wiring with 2.5 sqmm copper wire ( FRLS) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete as directed by engineer in charge .

All as per item above but wiring with 4 sqmm copper wire ( FRLS) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete as directed by engineer in charge .

Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor

Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.Make : Havells/Anchor

S&F Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed.

Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor

M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 32 amp complete all as specified and directed.

S&F distridution board iron clad vertical DB double door with IP-43 protection and mechanical strength as IK-09 suitable for MCCB as incomer an MCB as outgoing 415V 3Phase 50Hz 4 Way complete with appropriate size of copper bus bar and neutral link complete with one MCCB 3Pole 415V 40 Amps rating,16kA with adjustible thermal and adjustible magnetic release of the same make as of distribution board complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

M & L for Earthing complete with galvanised steel earth plate electrode of size 60×60cm×6mm thick surrounded by mixture of charcoal and salt in alternate layers, buried directly in ground vertically in a pit of depth not less than 2.25 metres deep below ground level with top edge of the plate not less'than 1.5 metres below normal ground level, connected to equipment by using galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule and connected to earthing test point all as specified and directed including earth pit of size 30cm x 30cm x 45 cm made of PCC 1:3:6 and PCC 1:2:4 cover, funnel, GI Tubing etc & testing on completion all as specified. Note :- The unit rate includes the cost of excavation & earth work in any type of soil, charcoal and salt in alternate layers, 20mm bore GI Pipe (med grade) for watering 40mm GI protection pipe (light grade) funnel, wire mesh,lugs, PCC 1:2:4 type B1 chamber in cement concrete 50mm thick precast RCC M-25 (design mix) cover duly reinforced with XPM (weight not less than 3kg/sqm) and CI frame etc and including provision of test point, connecting to test point and testing on completion etc complete all as specified. The unit rate also include earthing lead and protection pipe upto 7.5mtr from top of earth plate.

M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing MS ventilating fans Single phase, 230 volts 300 mm or complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete

M&L for Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid as directed.

Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core.

M/S RJ BUILDERS

M/S SAJAA CONSTRUCTION COMAPNY

M/S AB AHAD RATHER

MS SHEIKH NADEEM AKBAR

M/S ASMATULLAH SHAH

M/S SS SHAH WALI & CO

POPULARHARDWARESTORE

Bidder Name

M/S RJ BUILDERS

M/S AB AHAD RATHER

M/S SAJAA CONSTRUCTION COMAPNY

M/S ASMATULLAH SHAH

POPULARHARDWARESTORE

M/S SS SHAH WALI & CO

M/S AK CONSTRUCTION

MS SHEIKH NADEEM AKBAR