WELCOME MAINT AND MISC BR WORKS AT NEW NAVY NAGAR AREA UNDER AGE BRI OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each

Taking down aluminium frames with shutters not exc 1.5 sqm each

Taking down shutters of any description but exc 1 sq. m and n. exc 2 sq. m each

S &F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S & F 35 mm thick second class hardwood rail and style factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S & F 30 mm thick Flush shutters, solid core construction, with particle board core both face is covered with decorative face veneer with lipping/ frame to match

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement lime mortar in cm 1:2;4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts

M & L MS works in holdfast made of Fe -290 of any length

S & F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm length.

S & F Aluminium handles, cast type, anodised of length 150 mm

S & F in SS butt hinges 100 mm size

Hacking out old broken glass (any thickness size quality) from wooden or aluminium frames glazed with putty or fixed with beads (wooden or aluminium)

S&F Sheet glass, 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S & F 4 mm thick frosted Sheet glass, glazing with oil putty in squares n exc 0.5 sq. m in each pane

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm

S & F in repairs Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding layer in CM 1:4 complete all as specified

S&F Glazed coloured ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering as backing layer in CM 1:4 complete

Dismantling stone slabs/ tiles of any description

M&L udaipur green/baroda green marble slab 18-20 mm thick over cooking platform and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding , polishing and rounding edges complete. (Note : The rates included the cost of cement screed bed 10 mm thick)

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for including china mosaic & wc

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.with water proofing compound Rendering 10mm thick plaster in CM 1:3 on concrete surface. ( water proofing compound will be paid seprately ) Rate quoted inclusive of water ponding of sunken portion for 3 days .

Supply only water proofing compound of ISI marked.

M &L for cement concrete 1:7:12 type F2 using 40 mm aggregate as in sunken floor

S & F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including trap set in and including concrete including provision of lime concrete bedding

Taking down cement plaster of any description including racking out joints hacking for key scrubbing down with water including removal of debris.

M&L rendering 15mm thick in CM (1:6) on wall finished even and smooth without using extra cement as in patches all as specified and directed

All as per item No 27.00 above but 10mm thick in CM (1:3) in ceilling.

M&L applying two coats of oil emulsion distemper on wall over a coat of cement primer on new plastered surfaces of wall all as specified.

M&L applying three coats of white wash to ceiling incl preparation newly plastered surfaces.

Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 40 mm thick in flooring, all as speciifed and directed

M & L plain Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) in plinth protection, Floors and Pavings, hardstanding etc. 75 mm thick,laid in pannel, finished fair & even including filling the joints with sand mixed with bitumen in 1:1 ratio complete all as specified.

M&L applying two coats of synthetic enamel paint including preparation of new wooden surfaces over 10cm width/girth including preparation and over a coat of pink primer all as specified.

S &F 100 mm dia Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia all as specified and as directed. ( Inclusive of scaffolding of any hight )

S & F CI soil/ waste/ vent pipe in any length with ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed

S & F CI bends (any radius ) for soil / waste pipes 100 mm bore diminshing pieces or tapers on walls complete all as specified.

Dismantling of Plain or corrugated FRP /Steel chajja any Gauge thickness including all fittings and removal from MD land complete all as complete all as directed by Engr In Charge

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F Framed brackets / purlins of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., conforming to Fe 290 Gde E-165.

M&L applying two coats of synthetic enamel paint over a coat red oxide on steel newly surfaces over 10cm width/girth incl preparation of surfaces.

M&L applying one coat of oil bound emulsion distemper on old decorated surfaces including preparation of surface complete all as specified.

S&F Aluminium anodised section 15 micron for window (Sliding type) / ventilator (Partly fixed party louverd type) etc of anodised aluminium section ventilators partly fixed partly louvered type comprising frame, shutters, locking arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, levered aluminium sections for louvered glass, rollers , handle etc complete all as specified & directed. Note: (a) Glazing shall be measured separately. (b) Item shall be paid as per weight of aluminium section. (c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw etc as required which not be measured for arriving the weight. (d) Rate shall be inclusive of the aluminium handle, locking arrangement including complete packing with silicon gel around contecting surface of aluminium and including matching the existing surface area complete all as specified. (e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c .

S & F in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102

M&L machine cut kota stone slab 20 to 25mm thick in treads in window cill (provided in two layers with overlap) & length will be as per the length of windows) over and including 15 mm thic cement screed base in cm 1:3 laid and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and mirror polishing and moulding all as directed by Engr-in-Charge. (Note : Rate of Cement screed bed are included in the rate )

S&F 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame.

M&L Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding all as directed.

M&L two coats of acrylic paint exterior grade (100%Acrylic) over a one coat of primer including prepartion of newly plasterd surfaces of walls etc all specified on external surfaces.

M&L applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth all as specified.

SRI SAIRAM COUNSTRUCTION

Balaji Construction

P LAXMI AND CO.

Unitech Enterprises

Anil Industrial Corporation

Mayur Enterprises

S R Construction

Genius Construction Co.