Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹38.3 L+₹3.6 L (10.3%)Rejected-Finance 79 B BLOCK SRI GANGANAGAR 335001 RAJASTHAN | GANGANAGAR | RAJASTHAN | 335001 | L2 | Rejected-Finance Highest bid quoted other then L1 | |
| 3 | L3₹38.3 L+₹3.6 L (10.3%)Rejected-Finance 656 VINOBA BASTI SRI GANGANAGAR 335001 RAJ | SRI GANGANAGAR | SRI GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Highest bid quoted other then L1 | |
| 4 | Rejected-Technical | - | Rejected-Technical NO IN WLR |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
1 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri GanganagarCantt Rajasthan-335001
REPAIR/REWINDING OF SUMMER AND WINTER APPLIANCES AND REPAIR/REPLACEMENT OF E/M EQUIPMENTS AND CERTAIN MISC WKS AT MIL STN SGNR
2024_MES_635664_1
GE SGNR/TOK-76 OF 2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Sri Ganganagar(Raj)
D Class b(i) and d(v) or c(i) for un-enlisted, refer NIT para 8
7 documents required · 7 mandatory
₹500
GE Sri Ganganagar
₹96,000
Yes
21 Mar 2024
4 Jan 2024
3 Feb 2024
4 Jan 2024
1 Feb 2024
18 Jan 2024
Amount
Taking down ceiling fan for repair/serviceing (i.e. winding/ greasing/oiling etc.), 1200/1400 mm sweep of any make and any type model, sealing cable end with tape, dismantling the blades , removing fan and deposite the blades/motor to store for repairing/serviceing complete all as specefied and as directed by Engineer in charge.
Hanging only ceiling fan and connection up the point including provision of cable from ceiling rose to fan complete all as specefied and as directed by Engineer in charge. (Note: For the purpose of payment, the wire using ceiling rose to fan for connection shall be measured and paid seperate in approprite item and nothing extra pay for this item)
M&L for Re-winding of ceiling fan new model of size 1200 mm sweep with super enameled copper winding wire of gauge as per existing size /No. of wire confirming to IS, including varnishing the motor windings with best quality varnish complete all as specified and as directed by Engineer in charge.
M&L for Re-winding of ceiling fan new model of size 1400 mm sweep with super enameled copper winding wire of gauge as per existing size /No. of wire confirming to IS, including varnishing the motor windings with best quality varnish complete all as specified and as directed by Engineer in charge.
S&F in replacement ball bearing of size/No. 6201 confirming to IS complete all as specefied and as directed by Engineer in charge
S&F in replacement ball bearing of size/No. 6202 confirming to IS complete all as specefied and as directed by Engineer in charge.
S&F in replacement ball bearing of size/No. 6203 confirming to IS complete all as specefied and as directed by Engineer in charge.
S&F in replacement brass bush suitable for ceiling fan of any make and model confirming to IS complete all as specefied and as directed by Engineer in charge.
S&F in replacement broken bottom cover (bowl) of PVC suitable for ceiling fan of any make and model complete all as specefied and as directed by Engineer in charge.
S&F in replacement shaft for ceiling fan as per existing size and shape complete all as specefied and as directed by Engineer in charge.
S&F in replacement down rod (30-60) cm long suitable for 1200/1400 mm sweep of ceiling fan all as required at site complete all as specefied and as directed by Engineer in charge.
S&F in replacement D Clamp with nuts, check nuts, quarter pin and rubber reel suitable for 1200/1400 mm sweep of ceiling fan all as required at site complete all as specefied and as directed by Engineer in charge.
S&F in replacement PVC Canopies (Set of two) as required at site and complete all as specefied and as directed by Engineer in charge.
S&F in replacement condenser 2.5 MFD confirming to IS complete all as specefied and as directed by Engineer in charge.
S&F in replacement flexible wire of size 23/0.0076 standered copper conductor complete all as specefied and as directed by Engineer in charge.
S&F in replacement stepped type electronic fan regulator flush type on existing laminated sheet as per requirement complete all as specefied and as directed by Engineer in charge.
S&F in replacement fan blade suitable for 1200mm sweep ceiling fan of any make as per existing complete all as specefied and as directed by Engineer in charge.
S&F in replacement fan blade suitable for 1400mm sweep ceiling fan of any make as per existing complete all as specefied and as directed by Engineer in charge.
Cleaning and preparation of old surface of the ceiling fan complete of size 1200/1400mm sweep and applying two coat of spray painting with synthetic enameled paint complete all as specified as directed by Engineer-in-Charge.
Taking down and dismantling of exhaust fan 225mm/ 300mm/ 375mm/ 450mm sweep of any make and model, opening the cover, separating the rotor and stator assembly, locating the fault and making the fan fully serviceable condition including replacing the defected worn out screw, flexible wire of size 23/0.0076 , oiling/greasing the fan and re-assembling the same and testing complete to the satisfaction of Engineer in charge.
Fixing only Exhaust fan and connection up the point including provision of cable from ceiling rose to fan complete all as specefied and as directed by Engineer in charge. (Note: For the purpose of payment, the wire using ceiling rose to fan for connection shall be measured and paid seperate in approprite item of this Schedule)
M&L for Re-winding of exhaust fan 225mm sweep with super enameled copper winding wire as per existing size confirming to IS including varnishing the motor windings with best quality varnish complete all as specefied and as directed by Engineer in charge.
M&L for Re-winding of exhaust fan 300mm sweep with super enameled copper winding wire as per existing size confirming to IS including varnishing the motor windings with best quality varnish complete all as specefied and as directed by Engineer in charge.
M&L for Re-winding of exhaust fan 375mm sweep with super enameled copper winding wire as per existing size confirming to IS including varnishing the motor windings with best quality varnish complete all as specefied and as directed by Engineer in charge.
M&L for Re-winding of exhaust fan 450mm sweep with super enameled copper winding wire as per existing size confirming to IS including varnishing the motor windings with best quality varnish complete all as specefied and as directed by Engineer in charge.
S&F in replacement blades of suitable size for exhaust fan 225mm dully approved by GE complete all as specefied and as directed by Engineer in charge.
S&F in replacement blades of suitable size for exhaust fan 300mm dully approved by GE complete all as specefied and as directed by Engineer in charge.
S&F in replacement blades of suitable size for exhaust fan 375mm dully approved by GE complete all as specefied and as directed by Engineer in charge.
S&F in replacement blades of suitable size for exhaust fan 450mm dully approved by GE complete all as specefied and as directed by Engineer in charge.
S & F in replacement condenser 04 MFD confirming to IS complete all as specefied and as directed by Engineer in charge.
S & F in replacement MS shaft for exhaust fan as per existing size and shape complete all as specefied and as directed by Engineer in charge.
S&F in replacement MS back side cover including set and fastners for Exhaust fan of any sweep, size and make complete all as specefied and as directed by Engineer in charge.
S&F in replacement of exhuast fan Parts like jaali, legs, rubber parts of any size complete all as specified and as directed by Engineer-in-charge.
S&F in replacement exhuast fan louver shutters of size( 225 /300/ 375 /450 mm ) complete all as specified and as directed by Engineer-in-charge.
Cleaning and preparation of old surface of the Exhuast fan complete of size ( 225/300/375/450mm) and applying two coat of spray painting with synthetic enameled paint complete all as specified as directed by Engineer-in-Charge.
Taking down and dismantling of cabin/wall mounting fan of any size/make/sweep, opening the cover separating the motor and stator assembly, locating the fault and making the fan fully in serviceable condition including replacing the defective parts, fleaxible wire of size 23/0.0076, oiling/greasing the fan and re-assembling the fan, testing and refixing the fan complete all as specefied and as directed by Engineer in charge.
M&L for Re-winding the cabin/wall mounting fan 400/450 mm with and including super enamelled copper winding wire of existing specification, gauge and weight including insulating materials and varnishing the motor windings with best quality varnish complete all as specefied and as directed by Engineer in charge.
S&F in replacement brass bush suitable for cabin/wall mounting fan of any make/model confirming to IS complete all as specefied and as directed by Engineer in charge.
S&F in replacement push button cover of plastic suitable for cabin/wall mounting fan of any make/model with lock nut confirming to IS complete all as specefied and as directed by Engineer in charge.
S&F in replacement of ceiling fan BLDC motor kit for 5 star 1200/1400 mm, 26/32 watt, 230 volts 50 Hz complete all as specefied and as directed by Engineer in charge.
Removing of old paint complete with emery paper and cleaning with scrapper and preparation of internal surfaces & bottom of the desert coolers and applying two coat of spray painting with synthetic enamel paint to external surfaces of desert coolers including steel grills, side panel etc complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement water pumps heavy duty of capacity 1/70 HP , 230 volts 50 HZ single with copper winding complete all as specified as directed by Engineer-in-Charge.
S&F in replacement fan motor kit copper wound 1/6 to 1/8 HP 230 volts 50 HZ including mounting legs complete all as specified as directed by Engineer-in-Charge.
Taking down carefully fan motor 1/6 to 1/8 HP 230 volts, 50 HZ, existing desert coolers and refixing the same fan motor after rewinding with super enameled copper wire of existing size complete including replacement of mounting legs complete all as specified as directed by Engineer-in-Charge.
S&F in replacement of MS shaft for desert cooler motor as per existing size including two numbers gun metal bush complete all as specified as directed by Engineer-in-Charge.
S&F in replacement Cable 3 core, copper conductor size 40/0.0076 for water cooler complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement PVC front grill including nuts bolts and washers suitable for 18/20” sweep existing desert coolers with switches for cooler motor and water pump alongwith regulator complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement 20 gauge GI plain sheet class -III including cost of riveting welding, nuts and bolts as required for fixing etc complete all as specified and as directed. Bottom tank comlpete as per existing size.
S&F in replacement Top cover as per existing size of desert cooler complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement Side panels as per existing size of desert cooler complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement Wood wool pad for desert coolers (set of three) complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement Supporting Jali for desert coolers (set of three) complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement Plug Top 3 pin, 5-A, 230 Volt complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement Plug Top 3 pin, 15-A, 230 Volt complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement Fan blades made out of aluminium for desert cooler as per sample complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement MS Angles for desert cooler stands size as per existing cross section along with necessary fabrication and fixing works using suitable fasteners etc complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement distributor of PVC for Desert cooler with fixing bolt complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement Elbow of PVC for Desert cooler complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement float valve suitable for desert cooler (As per sample) complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement tape mounting nipple ½'' as per sample complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement water outlet nipple with washers and check nuts (copper/brass) complete all as specified and directed by Engineer - in - Charge.
S&F in replacement , heating element push type , 1500 watt of suitable shape and size , conforming to ISI with rubber washers, with clamps complete all as specified and directed by Engineer - in - Charge.
S&F in replacement , heating element push type , 2000 watt of suitable shape and size , conforming to ISI with rubber washers, with clamps complete all as specified and directed by Engineer - in - Charge.
S&F in replacement , thermostate switch suitable for storage type geysers complete all as specified and directed by Engineer - in - Charge.
Periodical examination, normal and routine maintenance, repairs and replacement of spares of EOT 5 Ton cranes of any makes of various spans and model complete all as specified and directed by Engineer - in - Charge.
Periodical examination, normal and routine maintenance, repairs and replacement of spares of EOT 3 Ton cranes of any makes of various spans and model complete all as specified and directed by Engineer - in - Charge.
Material and labour for conducting the load and deflection test to EOT/HOT cranes of following capacities and submitting test report to the GE through Engineer-in-Charge. Note(i)Load for testing of cranes shall be provided by the contractor under his own arrangement including transportation to and from the (ii) Crane testing is to be carried out by the authorised inspector as per factories ACT.
Up to 5 Ton EOT crane main hoist steel wire rope of suitable size and length including taking out old unsv items complete all as specified and directed by Engineer - in - Charge.
M&L for calibration and alignment of 5 Ton crane guarders, rails and square bars including necessary welding, grinding and finishing with required supports and rail cleats and support plates including painting to match with existing surfaces complete all as specified and directed by Engineer - in - Charge.
M&L for calibration and alignment of 3 Ton crane guarders, rails and square bars including necessary welding, grinding and finishing with required supports and rail cleats and support plates including painting to match with existing surfaces complete all as specified and directed by Engineer - in - Charge.
Coupling rubber bush with nut, bolts and springs washers for LT / CT / hoist motor coupling of the existing sizes and model of upto 05 ton cranes including removing of the unserviceable complete all as specified and directed by Engineer - in - Charge.
Dismantling of long travel assembly /Main Hoist /Cross Travel complete including all the electrical connections, repairs to damaged, long travel system with new gear and coupling, pedestal and modifying motor and gear box, platform with cutting and welding and reassembling the long travel assembly and reconnecting back electrical connections, testing and commissioning of crane of smooth operation of long travel system for 2/3/5 ton EOT crane complete all as specified and directed by Engineer - in - Charge.
Gear box oil complete all as specified and directed by Engineer - in - Charge.
Limit switch of any size for long travel/cross travel complete all as specified and directed by Engineer - in - Charge.
Contactor 30 Amps type with 110 volt coil complete all as specified and directed by Engineer - in - Charge.
Contactor 70 amps type with 110 volt coil complete all as specified and directed by Engineer - in - Charge.
Contactor spare contact kit for 30 Amps contactor with 110 volt coil complete all as specified and directed by Engineer - in - Charge.
Contactor spare contact kit for 70 Amps contactor with 110 volt coil complete all as specified and directed by Engineer - in - Charge.
Spare coil for contactor 30 Amp of 110 Volts complete all as specified and directed by Engineer - in - Charge.
Spare coil for contactor 70 Amps of 110 Volts complete all as specified and directed by Engineer - in - Charge.
Cadmium compound for wire rope complete all as specified and directed by Engineer - in - Charge.
Flexible geared coupling of any size complete all as specified and directed by Engineer - in - Charge.
Pedestal with bearing for long frame/cross travel shaft complete all as specified and directed by Engineer - in - Charge.
Hooter of any size complete all as specified and directed by Engineer - in - Charge.
Push button switches complete all as specified and directed by Engineer - in - Charge.
Overload relays contactor mounting above capacity of 16 Amp complete all as specified and directed by Engineer - in - Charge.
Flexible PVC insulated copper cable conductor, multi stranded, 12 Core, 1.5 Sqmm complete all as specified and directed by Engineer - in - Charge.
Flexible copper cable PVC insulated multi stranded of size 4 core 6 Sqmm complete all as specified and directed by Engineer - in - Charge.
Flexible copper cable, PVC insulated, multi stranded of size 4 core, 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.
Flexible copper cable PVC insulated multi stranded of size 4 core, 4 Sqmm complete all as specified and directed by Engineer - in - Charge.
Flexible PVC insulated multistranded copper cable of size 4 core 16 Sqmm complete all as specified and directed by Engineer - in - Charge.
6 Sqmm flexible steel wire Rope for pedestal push button box complete all as specified and directed by Engineer - in - Charge.
XLPE Al conductor cable 4 core 16 sqmm complete all as specified and directed by Engineer - in - Charge.
Periodical examination, normal and routine maintenance, repairs, indentify fault and replacement of spares of Solar Trafic lights of any makes of various locations and model .Note: - change of defective parts paid and measered under respective items of BOQ.
Solar Panel madule not less than 21 V suiteable for existing light fitting complete all as specified and directed by Engineer - in - Charge.
Traffic Signal Blinker suitable for existing fitting complete all as specified and directed by Engineer - in - Charge.
Wire Harness useable for serviceable light fitting complete all as specified and directed by Engineer - in - Charge.
Charge Controller complete all as specified and directed by Engineer - in - Charge.
Dry lithium Battery with 36 month warranty backup suitable capacity for existing light fitting complete all as specified and directed by Engineer - in - Charge.
Battery Box with fixing arrangement at back side the existing solar plate complete all as specified and directed by Engineer - in - Charge.
Solar LED Light fitting 18 watt including suitable driver with 1 year full warranty complete all as specified and directed by Engineer - in - Charge.
Periodical examination, normal and routine maintenance, repairs, indentify fault and replacement of spares of Boom barrier of any makes of various locations and model .Note: - change of defective parts paid and measered under respective items of BOQ.
Dismantling and taking down the unserviceable elect motor 1 HP, 230 volts, AC supply from MS wall mounted frame of Boom Barrier, carrying to the local workshop and rewinding the same with super enamelled copper winding wire as per existing gauge including varnishing etc. and refitting at site to Boom Barrier frame to its original position including testing on load all as per site requirement complete all as specified and directed by Engineer - in - Charge.
Movement acembly complete all as specified and directed by Engineer - in - Charge.
Brushless DC motor complete all as specified and directed by Engineer - in - Charge.
Spring complete all as specified and directed by Engineer - in - Charge.
Control Board complete all as specified and directed by Engineer - in - Charge.
Remote control complete all as specified and directed by Engineer - in - Charge.
Air Switch complete all as specified and directed by Engineer - in - Charge.
S&F in replacement M/L for chain link MS galvanised fancing of any size and type including lines wires, straining bolts and binding wires etc complete all as directed by Engr-in-charge. complete all as specified and directed by Engineer - in - Charge.
S&F in replacement galvasied mild steel channel, angle section etc for post of chain link fencing including notching for wire etc confirming to Fe 290 ,gradeE-165 complete, embedded in PCC. PCC shall be measured and paid seperately under respective items. complete all as specified and directed by Engineer - in - Charge.
S&F in repairs Supply only 10mm dia MS round bar for fixing of chain fencing with post complette including painting with two coats of approved colour over a coat of red oxide primer.complete all as specified and directed by Engineer - in - Charge. confirming to Fe 290 ,gradeE-165 .
M & L in replacement for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nut of approved size for HT 25x20cm complete all as specified and directed by Engineer - in - Charge.
S&F in repairs for anti-climbing device spikes type fabricated out of MS bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and directed by Engineer - in - Charge.
Repair & Replacement of Power backup including change of defective batteries of main Sub Station VCB Pannels and Main Control Relay pannels with existing 24 Volts 180 Amps Battery backup with connecting cable complete all as specified and directed by Engineer - in - Charge.
Replacement of old U/S Pannel and Supply, install, test and commisioning of LT panel duly powder coated of suitable size outdoor cubical type factory made, weather & vermin proof made out of CRCA sheet 3.15mm (outdoor type) thick machine pressed with bottom frame made out of angle iron 50mm x 50mm x 6mm and 600mm long 4 legs duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces grouted in PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm and 100mm thick PCC (1:2:4) type B1 floor over 100mm thick sub base of brick hardcore extended 100mm on all sides below panel body complete and suitable for 415 Volt AC 3 phase, 4 strip having insulated Copper bus bar 200 Amps from pole with openable double shutter on both sides (rear and front side) with locking arrangment duly pre-wired with suitable size of copper conductor cable fitted with Incomingproper size copper lugs/thimbless and connecting the incoming and outgoing MCCBs with suitable size strip duly bended and drilled and fixed with nuts, bolts & washers from bus bar to MCCBs etc duly fitted with and including the following accesories & all connected iems complete. FP No1 Incoming (i) MCCB 200 Amps, four pole with fixed thermal magnetic release, 415 V AC supply, having rupturing capacity 36 KA - 01 No Outgoing (ii) MCCB 100 Amps, Four pole with fixed thermal magnetic release, 415 volts having rupturing capacity 25 KA - 3Nos (iii) 32 Amp TPN - 01 Nos (iv) 25 Amp SPN - 02 Nos (v) Indicating lamps set RYB - 01 Set (VI) Digital Amp Meter 0- 250 A with CT , Digital Voltmeter 0- 500 V
Replacement of old U/S Pannel and Supply, install, test and commisioning of LT panel duly powder coated of suitable size outdoor cubical type factory made, weather & vermin proof made out of CRCA sheet 3.15mm (outdoor type) thick machine pressed with bottom frame made out of angle iron 50mm x 50mm x 6mm and 600mm long 4 legs duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces grouted in PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm and 100mm thick PCC (1:2:4) type B1 floor over 100mm thick sub base of brick hardcore extended 100mm on all sides below panel body complete and suitable for 415 Volt AC 3 phase, 4 strip having insulated Copper bus bar 200 Amps from pole with openable double shutter on both sides (rear and front side) with locking arrangment duly pre-wired with suitable size of copper conductor cable fitted with Incomingproper size copper lugs/thimbless and connecting the incoming and outgoing MCCBs with suitable size strip duly bended and drilled and fixed with nuts, bolts & washers from bus bar to MCCBs etc duly fitted with and including the following accesories& all connected items complete . Incomming (i) MCCB 100 Amps, four pole with fixed thermal magnetic release, 415 V AC supply, having rupturing capacity 25 KA -01 No Out going (ii) MCCB ,4 pole 63 Amp -02 No (ii) TPN 32 Amp -02 No (iii) SPN 25 Amp -02 Nos (iv) Indicating lamps set RYB - 01 Set (v) Digital Amp Meter 0- 200 A with CT , Digital Voltmeter 0- 500 V
Dismantling of Earthing & Supply, Installation, Testing and Commissioning of Chemical Earthing based on 3 metres long 50 mm dia EC Grade 'K' Copper earth pipe as a electrode 50mm bore duly fixed with connector at top for connection of copper strip 32 x 6mm riveted/nut bolt after 12 mm boring. The Electrode is surrounded by mixture of Teksai Electron 22 kg 1 bag & Ultra 10 Kg 1 bag Chemical compund powder including providing of pit cover heavy duty plastic of suitable size all as per manufacturer specification complete all as specified and directed.. Make- Teksai 350 Cu Ltd/Power Track/Tirupati(Nagpur) Note: i) Rate included for Testing commissioning including checking of earth continuity and earth result complete all as specified and as directed. ii) Venders are bound to get earthing result less than 0.5 ohm. If the result of earthing not achieved less than 0.5 ohm by one earthing then another additional earthing will be provided by the contractor as bi-pot including interconnecting with copper strip of same configuration at no extra cost to achieve test result as specified and all as directed by Engr-in -charge. iii) Rates for copper earth strip of size 32x6 mm up to 7.5 RM will deemed to be included in quoted rates. Copper earth strip beyond 7.50 Mtr shall be measured and paid Separately under relavent items.
Replacement of old unserviceable manual type and Supply, Fixing & install central geared elect motor 3 phase , 415 Volt, AC 50 Hz supply having capacity of maximum lifting weight upto 800 kgs with built in reduction gear and limit switch operating by means of operated switch incl cable etc. suitable for rolling shutter of size from upto 12 Sqmtr complete all as specified and directed by Engineer - in - Charge.
Supply, Fixing & install in replacement bevel gear box as per existing make and size heavy duty suitable for geared rolling shutter complete all as specified and directed by Engineer - in - Charge.
Supply, Fixing & install in replacement limit switch lever operated, 230 volts, 10 Amp rated capacity having 1 No + 1 NC connector complete all as specified and directed by Engineer - in - Charge.
Supply, Fixing & install in replacement helical spring made out of high tensile steel wire, factory made as per existing make, model and size complete all as specified and directed by Engineer - in - Charge.
Supply, Fixing & install in replacement MS coupling male and female duly bore with key and key slot and nut & bolt with washer (as per existing) suitable for any size existing rolling shutter complete all as specified and directed by Engineer - in - Charge.
Supply & Fixing in replacement of unserviceable key type three step (Up, Down and stop) switch to operate any size of rolling shutter by electrically as per existing make & model complete all as specified and directed by Engineer - in - Charge.
supply, installation and testing in replacement manual gear boxes upper and lower with chain wheel and handle chain upto 6mtr long MS rod for operating rolling shutter by manual complete including replacement of all consumables items such as bearing, gear wheel, nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.
Material and labour for scrapping down existing paint on rolling shutter and re-painting of rolling shutter with two coat of synthetic enamel paint after preparation of steel surface including one coat of red oxide primer complete all as specified and directed by Engineer - in - Charge.
S&F in replacement copper strip of size 32x6mm buried in ground and connected one end to electrode terminal and other end to terminal box with suitable size of copper nut, bolt & washers complete all as specified and directed by Engineer - in - Charge.
S&F in replacement for 190 cm dia cable route indicator made of CI plate 8 mm thick with spike to angle iron 25 x 25 x5mm, 40 mm long makred as LT/HT cable jointing on conductor coil plate complete including fixing and excavation in soft/loose/hard/dense soil, PVC embedded block size 300x300x300 mm (1:3:6) type C-1 using 20 mm graded stone aggreggate complete all as specified and directed by Engineer - in - Charge.
Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
THAKURJI ENTERPRISES
jassal engineering
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .