Supply, Installation, Testing and Commissioning of Street lights and Flood lights along with laying of cables at CSIR-CRRI, New Delhi-110025

Amount

Supply, Installation, Testing and Commissioining of 70W LED IP66/IP67 Flood light fittings on wall surfaces/roof/Iron angles with all accessories e.g. clamps, Fastner, nut -bolts etc. complete in all respect. (Model No. JETAALBFLOODLIGHT70W of Havells or equivalent Model of Philips/Crompton/Wipro)

Supply, Installation, Testing and Commissioining of 18W LED surface mount downlight with white powder coated aluminium housing with integrated electronic driver on ceiling with all accessories. (Model-INTEGRANXTRDDLRSURD18WLED857S of Havells or equivalent Model of Philips/Crompton/Wipro)

Supply and installation of Hot Dip Galvanized Iron Octagonal Pole of length 4 MTR, Top Dia - 70 mm, Bottom Dia - 130 mm, Thick -3 mm, Base Plate - 220 mm x 220 mm x 12mm, Tikki(Cap) for provision of fixing post top lamp and Foundation Bolt (4*16*450) and with provision of having aluminium busbar and chamber having locking arrangement for termination of cables and 16 Amp MCB for connection of post top light etc. completed in all respect as required.

Supply and installation of Hot Dip Galvanized Iron Octagonal Pole of length 6 MTR, Top Dia - 70 mm, Bottom Dia - 130 mm, Thick -3 mm, Base Plate - 220 mm x 220 mm x 12mm, Single Arm of length 1M for provision of fixing Street light and Foundation Bolt (4*16*600) and with provision of having aluminium busbar and chamber having locking arrangement for termination of cables and 16 Amp MCB for connection of Street light etc. completed in all respect as required.

Supply, Installation, Testing and Commissioining of 70 Watt energy efficient and environmental friendly long life LED Street light fittings made up of pressure die cast aluminium housing with high efficiency LEDs as light source and lens embedded PC cover having top opening seperate driver compartment with IP66 ingress protection with all accessories. (Model-ENDURAOMNIPLUSSL70WLED757SASYTOPC of Havells or equivalent Model of Philips/Crompton/Wipro)

Supply of 1.1 KV grade XLPE/ PVC insulated, PVC seathed, Aluminium conductor armoured power cables conforming to IS 7098 ( Part - 1) / IS 1554 ( Part - 1) and ISI marked as required. Make-Polycab/Havells/Gloster or equivalent.

2Cx10 sqmm

3Cx25 sqmm

Supply, Installation, Testing and Commissioining of 10W LED IP66/IP67 Bollard light fittings in Lawn with all accessories e.g. clamps, Fastner, nut -bolts etc. complete in all respect. (Model No. TURINBLS10WLED830PSYMTOPC of Havells or equivalent Model of Philips/Crompton/Powermax.)

Supply installation testing and commissioning of 2 way Street light Box,FRP/PVC body and weather proof (IP66/IP67) having facility of suitable Nut-bolt system for termination of cable upto 3 core 25 sqmm and provision of mounting of MCB with 01 No. (10A-32A) Amp MCB including connections etc. complete in all respect.

Supply, installation, testing and commissioning of 24 Watt LED cove light of 5 meter strip with driver complete in all respect. Make: FLEXISTRIP5MTRIP2024V/1ALED830MODV1 of Havells or equivalent Model of Crompton/Philips/Wipro/Garnet

Supply of 3W/5W LED Step Light/Foot Lamp white/Grey powder coated aluminium housing with integrated electronic driver of required size complete in all respect. Make-Havells/Philips/Crompton or equivalent.

Dismantling of Existing Bollard lights/Post top lights and demolishing of base/foundation of mounting including disconnection and disposal of waste within 50 mtr lead as directed by Engineer in-charge.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. (Provisional sum)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3X 25 sq. mm (25mm)

2X 10 sq. mm (19mm)

Supplying and fixing of 40mm sizes of medium class PVC conduit along with accessories in street light pole collar in vertical down from ground for laying of cables as required.

Providing and making steel pole collar with cement concrete (1cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supply, Installation, Testing and Commissioining of Decorative post top , 40W LED light fittings for 360 degree indirect light with IP 65 protection, spun aluminium landscape luminaire with high power LEDs as light source with all accessories e.g. fixing clamps/socket. Model-RUBYPT40WLED757PSYMTOPC of Havells or Crompton or Equivalent.

Supply, Installation, Testing and Commissioining of 8 way ETPN (IP43 protection)Metal door MCB distribution board (make : Legrand/L& T or equivalent) providing with suitable cable end box with provision for phase bus-bars, nutral bars with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnecting wire set, cable ties and circuit identification lables with provision of 4 pole MCB as incomer and SP MCBs as outgoings etc as required. Incomer - 63 Amps, FP MCB, C- curve, (Icu-10kA) - 2 Nos. Outgoing - 10-32 Amp SP MCB(10kA), C- Curve - 24 Nos. Make- Legrand/ L & T/Havells or equivalent.

Dismantling of old surface mounted ETPN DB with disconnections of incomer and outgoing circuits and reconnection of same in new installed DB complete in all respect as required.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Trenchless digging of Pathways/Roads manually of suitable size for inserting and passing dia 90mm DWC HDPE pipe for cable crossing at different locations atleast 75cm below the earth from surface level and dumping the surplus earth after refilling of same.

Buy-Back (ie minus) Removal of Old multicore Aluminium conductor Armoured PVC/XLPE Cable upto 400 sqmm from the Existing trench of Old subststion of CRRI by cutting through suitable Cutter Machine and taking it back on buyback basis.

SARANBIR DHINDSA

M J ELECTRICALS AND ELECTRONICS

A. R. Electric Corporation, Roorkee

ashirwad engineers

B S ELECTRICALS

vishram

MEC ENGINEERS

ENGINEERING SOLUTIONS

ANUKOM ENTERPRISES