Re-Construction of Jagner Inspection House in District Agra

Amount

Dismantling of cement concrete work with disposal of refuse within 60M as directed by engineer in charge.

Dismantling of Stone masonary in cement including stacking of dismantled material within a distance of 60 M.cement concrete work with disposal of refuse within 60M as directed by engineer in charge.

Earthwork in filling in ordinary soil in 20 cm layers including ramming and dressing the surface to the desired levels and slopes and also including all leads and 1.5 m lift as directed by engineer in charge.

Earthwork in excavation in trenches for foundations in ordinary soil(loam,clay or sand) including lift up to 1.5 m and lead up to 30 m and including filling,watering and ramming of excavated earth into the trenches or in to the space between the building and the sides of foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by engineer in charge.

Anti termite treatment of soil under floors using chemical Emulsion @ one litre per hole,300 mm apart @ 100 nos holes per 9.00 sqm including drilling 12 mm diameter holes and plugging also to match the floor properly.With Chloropyriphos / Lindan E.C. 20 % with 1% concentration. including supply of all materials, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

Providing and laying in cement concrete 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form - work, in foundation and floors including supply of all materials, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

Coarse Rubble Stone Masonary with hard stone (Dressed Stone Bricks of size 22-25X10-12X10-12 cm) in foundation and plinth in 1:4 cement mortar including Material, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

Coarse Rubble Stone Masonary with hard stone (Dressed Stone Bricks of size 22-25 X 10-12 X 10-12 cm) in superstructure in 1:4 cement mortar including material, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

Random Coarse Rubble Stone Masonary (Khanda stone) with cement mortar in 1:4 including labour, material and T & P.etc. required for proper completion of work as directed by engineer in charge.

R.C.C. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:1.5:3 in slabs excluding supply of reinforce-ment & its fixing and binding the same with 24BWG binding wire and including supply of all materials, labour and tools and plants etc,required for proper completion of the works. Strength of the concrete shall not be less than M-200 as directed by engineer in charge.

Centering and Shuttering for C.C./R.C.C. work including cost of Material, Labour and T & P etc. required for proper completion of work as directed by engineer in charge.

Tor steel in reinforced concrete brouht to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage, bending hooks and over lapping including material ,labour and T & P etc. required for proper completion of work as directed by engineer in charge.

Providing and laying Vitrified tiles in floor of 600 x600mm size (thickness 10mm) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactuer , in desired colours and shades, laid with cement based high polymer modified quick set tile adh- esive (water based) conforming to IS:15477, including grouting of joints.with base. including supply of all materials, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

Prvoding and laying Vitrified tiles in skirting (10mm thick) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, including grouting of joints.with base including supply of all materials, labour and T & P etc. required for proper completion of work.

Supply of fixing 6mm (1/4") thick china white glazed tile in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

12.5 mm thick cement plaster in 1:4 cement mortar in single coat including cost of scaffolding, labour , material and T & P etc.required for proper completion of work as directed by engineer in charge.

Finishing walls with putty of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over including curing and cost of all material, labour, T & P etc. required for proper completion of work for two coat as directed by engineer in charge.

White washing with lime on undecorated wall surfaces (two coat) to give an even shade including thoroghly brooming the surface to remove all dirt, dust morter drops and other foreign matter including cost of all material, labour, T & P etc. required for proper completion of work as directed by engineer in charge.

Distempering (two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Burger, J&N, Shalimar, Asian paints after throughly brushing the surface free from mortar droppings and other foreign matter also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth surface including cost of all materials,labour , T & P etc, required for proper completion of work as directed by engineer in charge.

Painting two coat over priming coat (including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10 sqm.in area white superior synthetic enamel such as LUXOL 3, Hi-gloss apcolite superiac, DULUX specified brushing to give an even shade and including cleaning the surface from all dirt, dust and other foreign matter, sand papering including cost of all materials, labour, tools and plants etc.required for proper completion of the work as directed by engineer in charge.

Supply and fixing of flush doors of commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers including fixing and adjustment of hinges, bolts, locks, handle, springs fittings with necessary screws including cost of all materials, labour, tools and plants etc.required for proper completion of the work.

Providing & fixing panel doors and windows including fixing of wooden cleats and stoppers including fixing and adjustment of hinges, bolts, locks, handle, springs fittings with necessary screws including cost of all materials, labour, tools and plants etc.required for proper completion of the work as directed by engineer in charge.

Providing & fixing Jali doors including fixing of wooden cleats and stoppers including fixing and adjustment of hinges, bolts, locks, handle, springs fittings with necessary screws including cost of all materials, labour, tools and plants etc.required for proper completion of the work as directed by engineer in charge.

Providing & fixing Glass pane including cost of all materials, labour, tools and plants etc.required for proper completion of the work as directed by engineer in charge.

Fabrication of grill / stair case railling including cost of all materials, labour, tools and plants etc.required for proper completion of the work as directed by engineer in charge.

Painting 1st coat over priming coat (But excluding cost of priming coat) on new wooden surface up to 10 cm width or gitrh or small articles not exceeding 0.10 sqm in area with superior synthetic enamel such as Luxol 3.Hi gloss apcolite,Superiac, Duluxe specified brushing to give even shade and including cleaning the surface from all dirt, dust,and other foreign matter, sand pappering and scraping including cost of all material, labour, T & p etc required for proper completion of work as directed by engineer in charge.

Painting top roof with bitumen of approved quality @1.70Kg. Per Sqm. Impregnated with a cost of coarse sand @ 0.60 Cum. Per 100Sqm.including cleaning the slab surface with a piece of lately soaked in kerosene oil complete. including cost of all materials, labour, tools and plants etc.required for proper completion of the work as directed by engineer in charge.

30 mm red sand stone sun-shade supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete. including cost of all materials, labour, tools and plants etc.required for proper completion of the work as directed by engineer in charge.

Providing& Fixing aluminium door handles with screws 125 mm long of approved brand as directed by engineer in charge.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size ,well rammed and consolidated and grouted with fine sand, including finishing the top to given smooth finish and proper grade including cost of all materials, labour, tools and plants etc.required for proper completion of the work as directed by engineer in charge.

Providing and Fixing tiled false Ceiling of approved materials of size 595 X595 mm in true horizontal level,suspended on inter locking metal grid including cost of all materials, labour, tools and plants etc.required for proper completion of the work as directed by engineer in charge.

Random Coarse Rubble Stone Masonary (Khanda stone) with cement mortar in 1:4 including labour, material and T & P.etc. required for proper completion of work as directed by engineer in charge.

Boring work of upto 30M for Water Harvesting including Supply of 40 Rm 110 mm dia,30Rm 140mm dia PVC Pipe of I.S.I mark, 110 mm PVC fitting such as Tee elbow, socket, solvent, cement clamp C.P. including cost of materials ,loading , unloading , carriage and labour etc. as directed by Engineer -in-Charge.

Supplying & Filling of Pea Gravel including cost of all materials, labour, tools and plants etc.required for proper completion of the work.

Filling of Coarse Sand including cost of all materials, labour, tools and plants etc.required for proper completion of the work.

Boring of 110 mm dia up to 150 m deep in rocky type of strata containing sand stone including Supply of 1.5 H.P. ISI mark Submercible pump set ,110mm dia and 320mm dia PVC pipe, fixing in position including eaxcavation of earth, cost of materials ,loading , unloading , carriage and labour etc. as directed by Engineer -in-Charge.

Providing & fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap,10 litre white P.V.C. flushing cistern, including flush pipe,manually controlled device (Handle lever) conforming to IS 7231 with all fittings and fixture complete including cutting and making good the walls and floors wherever required . White vitrous China Orissa pattern W.C pan of size 580X440 mm with integral type foot rests as directed by engineer in charge.

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan ) with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe with manually controlled device (Handle lever) Conforming to IS:7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid as directed by engineer in charge.

Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required as directed by engineer in charge.

a) Flat back wash Basin size 550x400mm

Providing and fixing white vitreous china laboratory sink with brackets, C.P. brass chain with rubber plug, 40 mm brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required.Size (450X300X150 mm) as directed by engineer in charge.

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete as directed by engineer in charge.

a) 32mm dia

Providing and fixing towel rail of Approved by engineer in charge.

Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality ) complete as directed by engineer in charge.

Providing & fixing soil, waste and vent pipes Approved by engineer in charge.

a) 100mm dia centrifugally cast iron S&S pipe

b) 75mm dia centrifugally cast iron S&S pipe

Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes & fitting of diameters as directed by engineer in charge.

Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. Of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls.

a) for 100mm dia pipe.

b) for 75mm dia pipe

Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors as directed by engineer in charge.

a) 100mm inlet & 75mm outlet.

Providing & fixing cast iron coller as directed by engineer in charge

a) 100mm dia.

b) 75mm dia.

Providing and fixing plain cast iron S&S sanitary bend as directed by engineer in charge.

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete directed by engineer in charge.

Providing and fixing cast iron terminal guard directed by engineer in charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipe conforming to IS :13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10mm gap for thermal expansion . (i) Single socket pipes.

a) 110mm diameter

Providing & fixing Stainless Steel. grating of approved quality and colour directed by engineer in charge.

a) 100mm dia

Providing,laying and jointing glazed stone ware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc complete as directed by engineer in charge.

100 mm diameter

Constructing brick masonry manhole with F.P.S bricks in cement mortar 1:4 (1 cement and 4 coarse sand), RCC top slab with 1:2:4mix (1 cement : 2 corse sand, 4 graded stone aggregate 20mm nominal size);foundations concrete 1:4:8 mix (1 cement :4 coarse sand:8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick cement plaster 1:4 (1 cement, 4 fine sand) finished with a floating coat of neat cement as directed by engineer in charge.

Inside size 900x800mm and 550mm deep

Fixing S.W gully trap grade "A" complete with C.I Grating, brick masonary chamber and water tight C.I Cover frame of 100x100mm size (inside) square mouth trap or "P' or "S" type trap as directed by engineer in charge.

Providing & fixing G.I. Pipes complete with G.I. fitting & clamps including cutting & making good the wall etc as directed by engineer in charge.

a) 25mm dia nominal bore (medium duty)

Providing & fixing G.I. Pipes complete with G.I. fitting & clamps including cutting & making good the wall etc. Concealed pipe including painting with anti corrosive bitumatic paint cutting chases & making good the wall etc as directed by engineer in charge.

a) 15mm dia nominal bore

Providing and fixing 45cm long unplasticised PVC connection pipe with brass unions as directed by engineer in charge.

a) 15mm dia nominal bore

Providing & fixing C.P. brass bib cock of approved quality conforming to IS 8931 as directed by engineer in charge.

a) 15mm dia nominal bore

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690gms as directed by engineer in charge.

a) 15mm dia nominal bore

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 as directed by engineer in charge.

a) 25mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats) as directed by engineer in charge.

a) 25mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality as directed by engineer in charge.

a) 25mm dia nominal bore

Providing and fixing brass C.P. stop cock (concealed) of standard design and of approved make conforming to IS :8931 as directed by engineer in charge.

a) 15mm nominal bore

Providing and fixing C.P.brass shower rose with 15 or 20 mm inlet as directed by engineer in charge.

a)50mm diameter

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fitting and the base support for tank.Capacity 500 litre as directed by engineer in charge.

Wiring points for light with 1.5 sq.mm. PVC insulated single core aluminium condutor cable in PVC conduit pipe on surface, complete with 1.5 sq. mm. PVC insulated aluminium conductor cable as earth continuity wire piano type switch and ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respects as directed by engineer in charge.

Wiring points for fan and light duty exhaust fan. with 1.5 sq.mm. PVC insulated single core aluminium condutor cable in PVC conduit pipe on surface, complete with 1.5 sq. mm. PVC insulated aluminium conductor cable as earth continuity wire piano type switch and ceiling rose on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respects as directed by engineer in charge.

Wiring points for plug with 1.5 sq.mm. PVC insulated single core aluminium condutor cable in PVC conduit pipe on surface, complete with 1.5 sq. mm. PVC insulated aluminium conductor cable as earth continuity wire piano type switch and soket etc. complete in all respects as directed by engineer in charge.

Supply and fixing of power plug with 15A/250 V flush type switch and 5 Pin 15 A/250V flush type universal socket in suitable M.S. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer as directed by engineer in charge.

Supply and fixing of switch box made up of 16 SWG (1.5mm) thick M.S. sheet of 200x250x65mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge.

Supply and fixing of switch box made up of 16 SWG (1.5mm) thick M.S. sheet of 175x100x65mm size duly painted with red oxide primer and flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge.

Supply and wiring of submain with two number 6 sq. mm .PVC insulated 1100 V grade single core aluminium conductor cable in 20mm dia heavy duty PVC conduit on surface, with one number 4 sq.mm. PVC insulated aluminium conductor cable as earth contunity wire etc. complete in all respects as directed by engineer in charge.

Supply and wiring of submain with two number 4 sq. mm .PVC insulated 1100 V grade single core aluminium conductor cable in 20mm dia heavy duty PVC conduit on surface, with one number 2.5sq.mm. PVC insulated aluminium conductor cable as earth contunity wire etc. complete in all respects as directed by engineer in charge.

Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects as directed by engineer in charge.

Supply & fixing of single wall light bracket made of brass on matching polished MDFEG board brass including connection etc. as required as directed by engineer in charge.

Supply & fixing of factory wired HPF box type flourescent tube light fitting suitable for following fluorescent tube including tubes etc. complete as required as directed by engineer in charge.

1x40 Watt.

Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work as directed by engineer in charge.

600x480x200 mm. size

Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work as directed by engineer in charge.

600x480x200 mm. size

S&F of Amp. 240V SPN metal clad rewireable type switch fuse unit on M.D.F.E.G./Teak wood board complete in all respect as directed by engineer in charge.

Supply and burying of 600mm x 600 mmx 6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects as directed by engineer in charge.

Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects as directed by engineer in charge.

Supply and Fixing of recess/Surface mount in ground 24 to 32 Watt LED Down Lighter off CAT-AA Category as directed by engineer in charge.

Providing and laying dry Stone aggregate 40 mm nominal size as directed by engineer in charge.

Laying of I Shaped precast interlocking tiles of thickness 60 mm to 100 mm ( Compressive strength not less than 30 Mpa and weight 4.50 Kg)including 25 mm thick local sand base, levelling and dressing of surface to required level and slope,filling joints with local sand.including supply of all materials, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

80 mm (Ordinary Grey)

M-150 Brickwork in 1:4 C.M. including supply of all materials, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

Struck Cement Pointing in 1:2 C.M.including supply of all materials, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

Cement Pointing 1:2 (Struck deep) on stone masonary.including supply of all materials, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

Mild Steel and iron work of heavy sizes such as trusses, built up gates,record rack, roof work, gates etc brought to required form including drilling holes ,revetting or welding where necessary and also including supply of steel bolts,nuts,wastage etc and their fixing require for proper completion of work as directed by engineer in charge.

C.C.1:1.5:3.including supply of all materials, labour and T & P etc. required for proper completion of work as directed by engineer in charge.

M/s HARSH CONSTRUCTION