Strengthening /maintenance of water regulatory gates at various locations on ranbir canal.

Strengthening /maintenance of water regulatory gates at various locations on ranbir canal.

Gates of Khandwal (5’-0” X 3.0”) Replacement of gate leaf, stem rod and gear set from winch machine of 02 ton capacity from the hoisting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged/worn out gate leaf structure with the help of manual labour using tools and tackles, chain pulley block and tripod/hydra crane after removing accumulated mud/silt around the gate leaf.. Fabrication of leaf structure at workshop of size 5.0’x3.0’ (approx) by replacement of sheet by using 4 mm sheet and replacement of 1 no. the ISMC channel 4 inch size for support by way of cutting /welding using superior quality electrodes. Also making of provision for stem rod attachment with MS Clamps.. Providing & fitting of gear set by oiling and greasing the gear mechanism before fitting. Complete painting of gate structure by way of Providing two coats of superior quality enamel paint after applying two coats of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation with the help of chain pulley block/crane. Unloading the gate structure and other allied material at site using crane/chain pulley block with the help of manual labour as per requirement. Fitting of winch machine on the hoisting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Providing of new gate operating handle Complete job includes cost of material, transportation charge, labour charges and testing for its smooth operation at site. Distributory Gate of Belicharana(5’-3” X 9’-10”) Providing /fitting of new bearings, new stem rod of the gate by way of dismantling the manually operated winch machine of capacity 10T by unscrewing/cutting of rusted/ nut bolts ,extracting the gear mechanism .Servicing/Repairs to winch machine by way of dismantling it from the frame channel of gate by unscrewing it ,taking it to workshop in mechanical transport and fitting of metal shims by way of grinding the surface of winch machine and welding it to obstruct the translational motion of worm ,fitting of winch machine greasing & oiling using standard quality grease after removing the old grease and washing cleaning with kerosene oil or any other solvent to make it dust free. Fitting of new stem rod, after greasing the threaded portion fixing it back to winch machine then after greasing the threaded portion fixing it back to winch machine. The job includes replacement of nut bolts. Cleaning the guide channels with kerosene oil to make it dust free and then greasing it. Job also includes complete painting of winch machine and gate by cleaning the surface by sand paper, scratching the surface of gate to make it smooth and applying two coats of paint, checking the up and down movement of gate The job includes cost of material, checking the up and down movement of gate hires charges of crane and other tools and tackles required for the job including labour charges. Gate at Lalyanamoga of size (2’ 6”X3’ 9”) Replacement of worn out parts of gate at Lalyanamoga of size 2’ 6”X3’ 9” by way of dismantling of manually operated winch machine of 2-ton capacity by unscrewing / cutting of rusted nuts and bolts from the hoisting channel, carriage of winch machine to workshop for repair. Dismantling the winch machine and extracting out the damaged worm gear, main gear and stem rod. Straightening the stem rod on machine. Fabrication/Providing and fitting the main gear and worm gear as per sample Greasing the movable parts and gear system of winch machine. Assembling back the winch machine along with stem rod and carriage back to the site of fitmentCleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure and winch machine with two coats of superior quality paint. Fitting back the winch machine on the hoisting channel by p/f of new nuts and bolt of required size along with stem rod and applying the grease on the stem rod. Cleaning the side grooves and checking the up and down movement of the gate. Complete job including cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work. Gate of Mandal Khul (4’-6” X 6’-0”) Replacement of 1 no. bearing along with gate handle and protection box of winch machine by way of dismantling of winch machine of using manual labour and other tools & tackles after dismantling of winch machine and lubricating the frame. Cleaning of Gate leaf, frame channel with suitable solvent to make it dust free and then lubricating the gate leaf channels properly. Preventive maintenance to winch machine by way of dismantling the winch machine ,providing of 1 no. bearing greasing & oiling using standard quality grease after removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Straightening of the stem rod for proper fitting with due mechanical processes The job includes fitting of 1 no bearing along with complete painting of winch machine and gate leaf by cleaning the surface of machine by sand paper, scratching the surface to make it smooth and applying with two coats of paint ,checking the up and down movement of gate ,fabrication/providing of 1 no gate operating handle cost of material, hires charges of crane and other tools and tackles required for the job including labour and shifting charges. Escape Gates of Belicharana (5’-3” X 9’-10”) Providing fitting of new worm drive with main gear for 10 T winch machine. Strengthening/ maintenance and repair of the gate by way of dismantling the manually operated winch machine of capacity 10T by unscrewing/cutting of rusted/ nut bolts, extracting the gear mechanism and stem rod. Servicing/Repairs to winch machine by way of greasing & oiling using standard quality grease after removing the old grease and washing cleaning with kerosene oil or any other solvent to make it dust free. Repairs to the stem rod by way of extracting it from the winch and then shifting to the workshop for straightening in bench press after greasing the threaded portion fixing it back to winch machine. Providing fitting of new worm drive with main gear along with bearings for 10 T winch machine Cleaning the guide channels with kerosene oil to make it dust free and then greasing it. . The job includes complete painting of both winch machine and gate by cleaning the surface of gate by sand paper, scratching the surface of gate to make it smooth and applying two coats of paint checking the up and down movement of gate The job includes cost of material, hires charges of crane and other tools and tackles required for the job including labour charges. Main Gate of Banzalla (3’-6” X 3’-6”) Replacement of 1 no. bearing along with gate handle and protection box of winch machine by way of dismantling of winch machine of using manual labour and other tools & tackles after dismantling of winch machine and lubricating the frame. Cleaning of Gate leaf, frame channel with suitable solvent to make it dust free and then lubricating the gate leaf channels properly. Preventive maintenance to winch machine by way of dismantling the winch machine ,providing of new bearing greasing & oiling using standard quality grease after removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Straightening of the stem rod for proper fitting with due mechanical processes The job includes complete painting of winch machine and gate leaf by cleaning the surface of machine by sand paper, scratching the surface to make it smooth and applying with two coats of paint ,checking the up and down movement of gate ,fabrication/providing of 1 no gate operating handle cost of material, hires charges of crane and other tools and tackles required for the job including labour and shifting charges. Garore escape gate of size (5’x6’.6”) Replacement of worn out parts of Garore escape gate of size 5’x6’.6” by way of dismantling of manually operated winch machine of 5-ton capacity by unscrewing / cutting of rusted nuts and bolts from the hoisting channel. Shifting the winch machine to road side with the help of manual labour using tools and tackles. Loading in mechanical transport for carriage to workshop for repair. Dismantling the winch machine at workshop. Extracting out the stem rod, straightening the stem rod on machine. Providing and fitting the worm gear and main gear along with bearing as per sample. Assembling back the stem rod and winch machine by applying grease to the gear mechanism carriage back the winch machine in similar manner to the site of installation. Cleaning of gate surfaces with sand paper and making the surface smooth. Complete painting of gate structure, hoisting channel and winch machine with two coats of superior quality paint. Assembling back the winch machine on hoisting channel by p/f of new nuts and bolt of required size along with stem rod and applying the grease on the stem rod. Cleaning the side grooves and checking the up and down movement of the gate. Complete job including cost of material, hire charges of tools & tackles and charges on a/c of skilled labour required for execution of work.

Rebate on Old Parts

GANPATI ELECTRICAL AND MECHANICAL WORKS

N B Engineering and Electric Works

GANPATI ELECTRICAL AND MECHANICAL WORKS