TRR(P) (25.00 Km) in Gorakhpur Cantt - Paniahwa Section and miscellaneous works under Jurisdiction of Sr. DEN/I/Varanasi.

A-IR-USSOR/2021 Items

B-IR-USSOR/2021 Items

C-IR-USSOR/2021 Items

D-IR-USSOR/2021 Items

E-IR-USSOR/2021 Items

F-IR-USSOR/2021 Items

G-IR-USSOR/2021 Items

H-IR-USSOR/2021 Items

I-CPWD DSR/2021 Items

J-CPWD DSR/2021 Items

Item Breakup - A-IR-USSOR/2021 Items

More than 40 m long rail panel

Extra to Item no. 061012 for working on bridge Dismantling and removing rail of all section & length from track, laid on any type & density of sleeper by removing fish plates, fastenings & fish bolts and other materials including stacking all released materials within an average distance of 500 metres as directed by Engineer in- charge. Note: 1.Cutting of rails shall be paid separately. 2.Work to be done under traffic block.

For Through Rail Renewal work Insertion of rails of all types & length in track, laid on any type & density of sleeper to the specified gauge under traffic block. Rates include fastening of rail with sleepers with standard set of fastenings and fixing of fish plates and bolts or, if required, providing gap for welding and stacking of released material without infringement within 250m as directed by Engineer-in-Charge. Note: Rail drilling and cutting to be paid separately. VARANASI DIVN.-ENGG/NORTH EASTERN RLY

For Through Rail Renewal work Replacement of any type of sleepers in track with PSC sleepers lying on cess or at Bridge Approaches for casual renewal at isolated locations with all fittings complete to specified gauge & cross level with contractor's tools including packing and dressing of ballast, as directed by Engineer in-charge. Released materials shall be neatly stacked and handed over at specified location within an average lead of 250 m or near either side of Bridge approaches as directed.

Locations other than Ballasted Deck Bridge

Ballasted Deck Bridge

Lubrication of Elastic Rail Clips on PSC sleepers with contractor's ERC grease, conforming to Railway's specifications, labour etc. complete as per procedure prescribed in latest edition of IRPWM.

Lubrication of Elastic Rail Clips on PSC sleepers as per procedure ERC prescribed in latest edition of IRPWM with Railway's grease.

Removing seized ERC from SGCI inserts of existing track by using ERC suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process.

Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or Each any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the screw w i t h specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. Drilling of hole of different diameter and chamfering, in rail of any section and any UTS manually only in emergencies with contractor's labours, tools & plants, consumables etc.

Hole of dia. 26.5mm and above Gas cutting of rail of various sections with contractor's tools & plants, as directed by engineer in-charge :

Rail section of 52Kg and above

Renewal of existing SEJ with improved SEJ with PSC sleepers under Set traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading rails, sleepers & fittings to site, leading and stacking of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. Total 6480523.25

Item Breakup - B-IR-USSOR/2021 Items

For rails/panels of more than 40m length - Under Conditions not RM requiring Traffic Block Total 651750.00

Item Breakup - C-IR-USSOR/2021 Items

Without Rail tensor

Replacing existing glued joint rail with cut rails or with glued joint rail Each or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. Fixing of Wooden Distance Block of size 1.0m x 0.3m x 0.15m between track and platform wall.

With Contractor's hard wood block.

Drilling holes of 16mm to 22mm dia. on all types of PSC sleepers and Each fixing the dowels with adhesive of RDSO approved quality for fixing check rails & guard rails, as directed by Engineer in-charge. Anti-corrosive painting of rail outside track on rail bottom, web, foot and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to IS-9862 of reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM.

For 60 Kg Rails Total 4998524.00

Item Breakup - D-IR-USSOR/2021 Items

60 Kg - 110/90 UTS - Outside Track

60 Kg - 110/90 UTS - On Running Line

52 Kg - 90 UTS- On Running Line Total 543608.00

Item Breakup - E-IR-USSOR/2021 Items

In Wagon where mechanical handling is possible and traffic block is not MT required or in Truck/trailer. Loading of tongue rail, stock rail, switch assembly and crossings of any section and length, SEJ, Glued joint etc. with / without P.Way fittings and fastenings, in Wagon / Truck / trailer including lead up to 250 metre and lift up to 5 metre.

In Wagon where mechanical handling is possible and traffic block is not MT required or in Truck/trailer. Loading, leading and unloading of 52Kg / 60Kg rail up to 13 metre length by Railway's Rail Dolly / Dip Lorry to the nominated location under traffic with line protection in case road carriage is not possible with different lead with a lift up to 5 metre during block period.

For lead up to 500 metre.

For lead beyond 500 metre and up to 1 Km. Loading, unloading and hauling of 52Kg / 60Kg rail more than 13 metre and up to 39 metre length by Railway's Rail Dolly / Dip Lorry to the nominated location under traffic and line protection in case road carriage is not possible for different leads and lift up to 5 metre.

For lead up to 500m

For lead beyond 500 metre and up to 1 Km VARANASI DIVN.-ENGG/NORTH EASTERN RLY Unloading of all type of rails of length 130 metre and beyond from end unloading rake and keep the panels in head-up position at specified distance from centre of track clear from any infringement.. Note: Contractor has to keep Oxygen and Acetylene gas with cutter as standby during the period of work.

During period of traffic block Loading of 52kg / 60kg PSC normal line and special sleepers up to 2.75 metre length in Depot / Station / Mid-section between stations in a neat manner to departmental material train (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track with free lead up to 250 metre and lift up to 5 metre, if required with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied.

In Wagon where mechanical handling is possible and traffic block is not MT required or in Truck / trailer Loading, leading and unloading of all types of P.Way fittings and all other miscellaneous m a t e r i a l except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motorable road length between the points of loading and unloading.

Lead up to 5 Km

Lead beyond 5 Km and up to 10 km

Lead beyond 10 Km and up to 20 km

Lead beyond 20 Km and up to 30 km

Lead beyond 30 Km and up to 50 km

Lead beyond 50 Km and up to 100 Km

Lead beyond 100 Km and up to 150 Km

Extra for every Km per MT beyond 150 Km over item no. 172047 Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: 1 . Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items.

Lead up to 5 Km

Lead beyond 5 Km and up to 10 km

Lead beyond 10 Km and up to 20 km

Lead beyond 20 Km and up to 30 km

Lead beyond 30 Km and up to 50 km

Lead beyond 50 Km and up to 100 Km

Lead beyond 100 Km and up to 150 Km

Extra for every Km per MT beyond 150 Km over item no. 172057 Unloading of 52kg / 60kg PSC line and special sleepers up to 2.75 metre length in Depot / Station / Mid-section between stations in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track and lead up to 250 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied.

From Truck / Trailer Unloading of Switches / Crossings / SEJ Rails / Glued Joints of any rail section and length with or without P.Way fittings & fastenings in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/Trailer with lead up to 250 metre & lift up to 5 metres.

From Truck / Trailer Total 3697441.25

Item Breakup - F-IR-USSOR/2021 Items

Dismantling existing check rail of Level Crossing, blocks, bolts & nuts RM and stacking these in a countable manner near LC, free from any infringements as directed by Engineer in-charge. Overhauling of level crossing by digging out up to 50mm below sleeper, screening of shoulder & crib ballast, replacing unserviceable sleepers & fastenings as necessary, removal of check rails for examination of running rails and check rails, scrapping of rails and painting running rails and check rails and all fixtures with two coats of coal tar emulsion, greasing of ERCs, MCI inserts and liners oiling all the bolts, correcting cross level, gauge, alignment, surfacing and packing etc., re-fixing check rails duly ensuring standard clearances, re- inserting screened ballast, making good deficient ballast with Railway's ballast from stacks / heaps/borrowing from adjacent length of adjoining track within 50m lead, ramming & levelling road surface and refixing concrete slabs/making motarable road surface as required excluding re surfacing with bitumen as directed by Engineer in-charge.

Level crossings with asphalted road surface VARANASI DIVN.-ENGG/NORTH EASTERN RLY

Fabrication including cutting, bending/machining and fixing of check TRM rails of all rail sections over PSC Sleepers as per Railway's approved drawings & specifications for level crossings / trolley paths/inspection lines in yards duly cutting rail flanges, wherever required to correct alignment and level, drilling of holes with machine in check rails and fixing to Running rail and sleepers with all Railway's fittings, e.g. rail screws / grip expansion bolts, brackets, packing pieces, bolts, washers etc including grinding of brackets if required, fixing of Railway's wooden blocks at flare ends duly cutting and plaining, crossing of tracks and as directed by the engineer in-charge Note: 1. Drilling of holes in PSC Sleeper and fixing of dowels shall be paid under relevant item. 2. Required P.Way materials will be supplied at SSE/P.Way stores.

Fixing check rails to running rails on level crossings with MS brackets, Set MS packing plates, bolts & nuts, spring washers etc. including lubrication as per approved drawing & specifications, as directed. Rails, MS brackets, packing plates, bolts & nuts, spring washers will be supplied by Railways. Note: One set consists two check Rails. Manufacturing, supplying and laying factory made CC block pavers for road surface of level crossings to RDSO Drg. No. M.00003, manufactured using 20mm size graded hard stone aggregates of approved quality over a well compacted sand bedding 50 thick with all contractor's cement, labour, tools/plant and curing with all lead & lift as per specifications and as directed by Engineer in-charge.

120mm thick blocks of M-40 grade for heavy traffic. Total 2958880.82

Item Breakup - G-IR-USSOR/2021 Items

Arranging labour as and when required by the Engineer in charge, for Day various works under SSE/P.Way, with contractor's T&P, equipments, hand signal flags, etc. as per specifications, special conditions and detailed scope of work as furnished in the tender and as directed by the Engineer in charge. Note: Item shall be operated with prior approval of concerned Sr. DEN / DEN in charge. Total 717672.00

Item Breakup - I-CPWD DSR/2021 Items

Item Breakup - K-NS Items

Pre tamping measurements (a) reference point :- Establishment of Kilometre main GNSS (DGPS base) Point and reference point establishment of main GNSS (DGPS base) point and reference point establishment at 150 meter maximum interval along the track.

Pre measurement for tamping with total station and prism gedo trolly Kilometre measure and store gauge cross elevation, chainage, shift and lift value at every three meters i.e. Every fifth sleeper interval along the track centre line at every three meters to be submited with track geomentry (Per KM/Round)

Design alignnment:-Construct target /design alignment with the good Kilometre points of existing pre measurement profile in design software to export date in ALC format with dinged alignment or measured reading in M/C and to provide track adjustment file with extension and also to provide Geo Geometry file to provide text file with slew, uplift and gauge at every three meter i.e. every fifth sleeper interval for tamping machine operator during reference.

Post tamping measurement (a) Post tamping measurement with total Kilometre station & prism Gedo Trolley measure and store gauge, cross elevation, chainage, shift & lift value at every three meters i.e. Every fifth sleeper interval along the track centre line and coordinates of track centre line at every three meters to be submitted with track geometry (per KM/per Round).

NS Reporting (a) Report and plotting soft and hard copies of slew and Kilometre uplift report at every 3meter/5meter i.e. Every fifth sleeper interval compared with design Vs preprofile report of offset distance from track centre to OHE, neighbouring track centre & platform point. VARANASI DIVN.-ENGG/NORTH EASTERN RLY Total 3712287.67