Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAccepted-AOC | ₹1.6 L | L1 | Accepted-AOC L1 |
| 2 | L2₹1.6 LRejected-AOC | ₹1.6 L | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | PRECISE POWER PROJECTS PRIVATE LIMITED L2 | M/s SVGS Enterprises L1 |
|---|---|---|---|---|---|
| 1.00Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: | |||||
| 1.10The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. | |||||
| 1.20Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. | |||||
| 1.30On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. | |||||
| 1.40 | On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) | 68.81 | Sqm | 2,390 ₹1.6 L | 2,270 ₹1.6 L |
Tender Value
Refer Docs
EMD Value
₹3,300
Closing Date
4 Oct 2025, 12:00 pmClosed
Assistant Engineer IV
LDSC Lucknow
Polishing of Corridor at 2nd floor of Dr. Ram Manohar Lohiya Parikalp Bhawan, Telibagh, Lucknow. (Lot No.04)
2025_UPIDC_1063632_62
03/AEIV/2025-26
Open Tender
Civil Works
30 days
Parikalp Bhawan Telibagh
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
₹3,300
5 Jan 2026
27 Sept 2025
4 Oct 2025
27 Sept 2025
4 Oct 2025
27 Sept 2025
27 Sept 2025 - 4 Oct 2025
Amount
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.
Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.
On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.
On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
PRECISE POWER PROJECTS PRIVATE LIMITED (BID ID -5580836)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid