Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.8 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹13.3 L+₹1.5 L (12.7%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹14.3 L+₹2.5 L (21.2%)Rejected-Finance AT POST ARANGAON MEHERABAD TAL DIST AHMEDNAGAR PIN 414006 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414006 | L3 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹19.8 L
EMD Value
₹40,000
Closing Date
19 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D GIRINAGAR PUNE 411025
GE I R AND D GIRINAGAR PUNE 411025
PROVISION OF CERTAIN MINOR WORKS AT VRDE AHMEDNAGAR 06
2022_MES_565924_1
GE I R AND D GIRINAGAR TOKEN 45 OF 2022 2023
Open Tender
Civil Works
Works
90 days
GE I R AND D GIRINAGAR PUNE 411025
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE I R AND D GIRINAGAR PUNE 411025
₹40,000
Yes
2 Jan 2024
29 Nov 2022
21 Dec 2022
29 Nov 2022
19 Dec 2022
6 Dec 2022
29 Nov 2022 - 3 Dec 2022
Amount
Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m in all kind of soil complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil complete all as specified and directed.
M&Lfor 1:3:6 (1Cement:3 manufactured sand derived from Recyciled concreate Aggregate (RCA) :6 graded stone aggregate 40mm nominal size Recycled Aggregate (RA) complete all as specified and directed.
M&L for brick work with common burnt clay bricks of class designation 7.5 in foundation and plinth in CM 1:4 (1Cement:4 Course sand) complete all as specified and directed.
M&L for damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) complete all as specified and directed.
M&L for plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and directed.
M&L Thermo-Mechanically Treated bars of grade Fe-500D steel reinforcement for RCC work including straightening, cutting, bending, placing in postion and binding all complete upto & above plinth leval complete all as specified and directed.
M&L for steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level complete all as specified and directed.
S&F centreing and shuttering including strutting, propping etc. and removal of form for foundation, footing bases of columns, etc. for mass concrete etc complete all as specified and directed.
S&F centreing and shuttering including strutting, propping etc. and removal of form Lintals, beams, plinth beams,girders, bressumers and cantilevers complete all as specified and directed.
S&F in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
M&Lfor 15mm cement plaster on the rough side of single or half brick wall of cement mortar 1:4 complete all as specified and directed.
M&L for 20mm cement plaster of mix 1:4 all as specified complete all as specified and directed.
M&L for distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour & two or more coats on new work complete, as per manufacturer's specification.
M&L for applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface with water thinnable cement primer complete all as specified and directed.
M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade with New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.80 Litre/10 sqm) all as specified and directed.
M&L for applying prime coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete all as specified and directed.
M&L for wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with two or more coats on new works complete all as specified and directed.
M&L for applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed.
M&L for 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados with & over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.
M&L for ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid with and over 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc complete all as specified and directed.
Supply and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable complete all as specified and directed.
Supply and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately).Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable complete all as specified and directed.
M&L for Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete all as specified and directed.
S &F corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.80mm thick with zinc coating not less than 275 gm/m2 complete all as specified and directed.
S&F 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete 0.80mm thick with zinc coating not less than 275 gm/m2 complete all as specified and directed.
Supply and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(i) Single socketed pipes 110MM diameter complete all as specified and directed.
Supply and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL : 15mm dia nominal bore complete all as specified and directed.
All as per above items No 28.00 but 20 mm dia nominal bore complete all as specified and directed.
Supplying and fixing brass bib cock of approved quality :15mm nominal bore complete all as specified and directed.
Supplying and fixing brass stop cock of approved quality : 15mm nominal bore complete all as specified and directed.
Supplying and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20mm nominal bore complete all as specified and directed.
Supplying and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20MM Nominal bore complete all as specified and directed.
Supplying and fixing uplasticised PVC connection pipe with brass unions :15mm nominal bore complete all as specified and directed.
Supplying and laying 250MM dia RCC Pipe, non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete all as specified and directed. :
Supply and fixing 18 mm thick granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade,Area of slab over 0.50 sqm all as specified and as directed by Engr-in-Charge.
Supply and fixing false ceiling 12.5mm thick tapered edge Glass Reinforced Gypsum (GRG) board confirming to IS : 2095 (Part-3) : 1996 (Board with BIS Certification marks) at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with & all as specified and as directed.
Surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, of all kinds of soil as directed by Engineer-in-Charge:
M&L forThermo Mechanically Treated bars of grade Fe-500D or more steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level complete all as specified and directed.
M&L for Thermo Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level complete all as specified and directed..
M & L for Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Makrana white second quality complete all as specified and directed.
Supply and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5mm, joints mitred and welded by angle iron 35x35x5mm or 35x5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of Engr-in-Charge.
S&F motorised gate operating system for existing sliding gate including all gear boxes, bearing, wheels, bright bar, channel required, safety sensors, push button ON/OFF starts, manual control/remote control with long pully and strip including necessary motor of capacity upto 2500Kgs, steel rope, conductors required and complete all as specified and directed.
S&F coloured venetion blins suitable to windows including roller, vertical or horizental blinds, top roller assembly fixed in position with suitable arrangement, screws as per manufactures in structures all as directed by Engr-in-Charge.
S&F BLDC type ceiling fan of 1200 mm size complete all as specified and directed. Make- Bajaj Model No:- Energos 26 / Usha or equivalent & approved
Supply only Desert cooler 70 Ltr capacity complete all as specified and directed. Make : Symphony Model No:Sumo 70 XL Power Powerful Desert Air Cooler 70-litres or equivalent of Blue star / Voltas approved.
S&F wiring for light point/ fan point/exhaust fan point/call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit , with piano type switch, phenolic laminated sheet, suitable size M.S. box & earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required complete all as specified and directed.
S&F wall mounted fan of 300mm size complete all as specified and directed. Make- Bajaj- Model no. Neo-Spectrum Grey Wall Fan 300 mm or equivalent in Crompton Greeves / Usha & approved.
Supply only Pedestal type fan of 450 mm sweep complete all as specified and directed. Make- Bajaj-Supreme MK II 450 mm Air Circulator Pedestal type or equivalent in Crompton Greeves/ Usha & approved.
M&L wiring for circuit/ submain wiring along with earth wire with the 2x4 Sq. mm. 21x4 Sq.mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required complete all as specified and directed.
S&F MCB DB 240 V SPN 6 way on surface/recess , complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required.(But without MCB/RCCB/Isolators) complete all as specified and directed.
S&F 5-32 A 240 V 10 KA 'C' curve type MCB suitable for inductive load of following poles in MCB DB complete with connections , testing & commissioning etc as required complete all as specified and directed. (a) Single pole & neutral
All as per item No 52.00 but Single pole complete all as specified and directed.
Supplying and fixing Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron), aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
Supply and fixing glazing with float glass panes of 5mm thickness (weight not less than 12.50kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item)
Supply and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.
Supply and fixing aluminium tubular handle minimum thickness 50 micron aluminium tubular handle bar bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.
Supply and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete all as specified and directed..
Supply and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete all as specified and directed.
M& L for Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and painting with synthetic enamel paint of approved brand and all as specified and as directed.
Supply and fixing structural steel frame (for dry cladding with 30 mmthick gang saw cut with machine cut edges sand stone) on walls at allheights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin- charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for pproval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be easured for the purpose of payment, Stainless steel cramps shall be paid for separately and nothing extra shall be paid).
M& L for two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and painting with synthetic enamel paint of approved brand and all as specified and as directed.
Supply and fixing 20mm OD (SDR-7.4) 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801 UV stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing This includes testing of joints (Internal exposed wall) complete as per direction of Engr-in-Charge.
Supply and fixing 20mm OD (SDR-7.4) 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801 UV stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing This includes testing of joints (External exposed wall), complete as per direction of Engr-in-Charge.
Supply and fixing 20 mm dia nominal bore,G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete all as specified and directed.
Supply and fixing brass bib cock of approved quality :15mm nominal bore complete all as specified and directed.
Supply and fixing brass stop cock of approved quality :15 mm nominal bore complete all as specified and directed.
Supply and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore complete all as specified and directed.
Supply and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20MM Nominal bore complete all as specified and directed.
Supply and fixing uplasticised PVC connection pipe with brass unions :15mm nominal bore complete all as specified and directed.
Supply and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer complete all as specified and directed.
Supply and placing on terrace (at all floor levels) circular tank, polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed.
Supply and fixing Granite stone of approved shade, slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth complete all as specified and directed.
Supply and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of three half stall urinals with 10 litters P.V.C automatic flushing cistern complete all as specified and directed.
Supply and making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with roller complete all as specified and directed.
Supply and laying in matt finished vitrified tile of size 600x600x9.8 mm having with water absorption less then 0.5% and conforming to IS : 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc, laid on 20mm thick base of cement mortar 1:4(1cement : 4course sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per dierction of Engr-in-Charge.
M & L for laying in position 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level all as specified and directed.
Supply only Fine Sand (Zone IV) complete all as specified and directed.
Santosh Popatrao Sarode
Smruti Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .