Renovation Refurbishment Improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai

DSR-2023 DESCRIPTION DSR AMOUNT NDSR AMOUNT REMARK

A CIVIL, INTERIOR AND EXTERNAL DEVELOPMENT

1 SUB 15.0 DISMANTLING & DEMOLISHIONG 16,90,019.74 -

2 SUB 1.0 EARTHWORK 83,383.64 -

3 SUB 2.0 CONCRETE WORK 53,606.21 -

4 SUB 3.0 REINFORCED CEMENT CONCRETE WORK 15,31,811.48 -

5 SUB 4.0 BRICK WORK 2,31,597.56 -

6 SUB 10.0 FINISHING WORK 5,65,037.28 -

7 SUB 12.0 WATERPROOFING WORK 23,25,129.00 -

8 SUB 5.0 CLADDING WORK 21,82,299.65 -

9 SUB 6.0 WOOD WORK/ GLASS PARTITION 17,48,115.00 27,85,000.89

10 SUB 7.0 FLOORING WORK/DADO 1,19,15,359.52 -

12 SUB 9.0 STEEL WORK 47,71,497.52 -

14 SUB 14.0 STRUCTURAL GLAZING & ALUMINIUM 81,09,159.68 -

15 SUB 15.0 FURNITURE - 73,58,883.16

TOTAL CIVIL WORKS 3,60,20,623.45 2,36,79,694.25

B MEP SERVICES

16 1 INTERNAL & EXTERNAL PLUMBING SERVICES 14,37,261.64 10,30,759.74

TOTAL MEP SERVICES WORK 2,05,86,794.12 11,93,04,434.67

GRAND TOTAL 19,95,91,546.49

GRAND TOTAL 19,95,91,546.49

Digitally signed by DEEPAK

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

1 SH-15 DISMANTLING & DEMOLISHIONG

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and

2 15.3 disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- Cum 50.00 3,551.25 3,455.37 4,042.78 2,02,138.93 -

Demolishing brick work manually/ by mechanical means including stacking of serviceable

3 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of Cum 50.00 2,060.20 2,004.57 2,345.35 1,17,267.61 -

Engineer-in-charge.

3.1 15.7.4 In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking

within 50 metres lead :

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material

and disposal of unserviceable material within 50 metres lead.

Dismantling steel work manually/ by mechanical means in built up sections without

dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster

including disposal of rubbish to the dumping ground within 50 metres lead

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling

9 15.57 including disposal of unserviceable material and stacking of serviceable material with in 50 Sqm 4,000.00 56.35 54.83 64.15 2,56,597.61 -

meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting, unloading to approved municipal dumping

ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including

all lifts involved.

DISMANTLING & DEMOLISHIONG Total Amount 16,90,019.74 -

DISMANTLING & DEMOLISHIONG Total Amount 16,90,019.74 -

SH-1.0 Earth Work

Earth work in Excavation by mechanical means (Hydraulic excavator)/manualmeans over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

2.25 layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and Cum 103.00 196.00 190.71 223.13 22,982.22

watering, lead up to 50 m and lift upto 1.5 m.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

treatment at points of contact of wood work by chemical emulsion chlorpyriphos/ lindane (in oil

2.35.5 or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle MTR 130.00 279.79 272.24 318.52 41,407.05

of 45 degree at 150 mm centre to centre and sealing the same.

Earth Work Total Amount 83,383.64 -

Earth Work Total Amount 83,383.64 -

SH-2.0 CONCRETE WORK

Providing and fixing up to floor five level precast cement concrete string or lacing courses,

copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc.,

including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand),

cost of required Centering complete.

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone

aggregate 20mm nominal size derived from natural sources)

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone

aggregate 40 mm nominal size derived from natural sources)

CONCRETE WORK Total Amount 53,606.21 -

CONCRETE WORK Total Amount 53,606.21 -

SH-3.0 REINFORCED CEMENT CONCRETE WORK

5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 20.00 392.15 381.56 446.43 8,928.55

5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc Sqm 740.00 842.50 819.75 959.11 7,09,741.71

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete upto plinth

5.22.6 Thermo-Mechanically Treated bars. Kg 4,000.00 107.85 104.94 122.78 4,91,110.07

Providing and laying in position specified grade of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone

aggregate 20 mm nominal size de rived from natural sources)

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°

landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair

5.3 cases above plinth level up to floor five level, excluding the cost of centering, shuttering, Cum 1.00 11,505.50 11,194.85 13,097.98 13,097.98

finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from

natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

REINFORCED CEMENT CONCRETE WORK Total Amount 15,31,811.48 -

REINFORCED CEMENT CONCRETE WORK Total Amount 15,31,811.48 -

11 SH-4.0 BRICK WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5

in superstructure above plinth level up to floorV level.

BRICK WORK Total Amount 2,31,597.56 -

BRICK WORK Total Amount 2,31,597.56 -

14 SH-10.0 FINISHING WORK

15 13.4 12 mm cement plaster of mix

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare

the surface even and smooth complete.

18.1 13.5 Applying priming coat:

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel

galvanised iron/ steel works

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

20 13.83 Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour.

13.46 Finishing walls with Acrylic Smooth exterior paint of required shade : -

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of

exterior primer applied @ 2.20 kg/10 sqm)

Paintting with oil type wood preservative of brand and

13.57.1 New work (two or more coats) Sqm 150.00 54.40 52.93 61.93 9,289.43

Finishing with Epoxy paiöt (two or more coats) at all locations prepared

13.52 and applied as per manufacturer's including appropriate

priming coat, preparation of surface, etc. complete.

FINISHING WORK Total Amount 5,65,037.28 -

FINISHING WORK Total Amount 5,65,037.28 -

38 SH-12.0 WATERPROOFING WORK

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying : (a)

First layer of slurry of cement @ 0.488 kg/sqm mixed with

water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4

hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with

water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all

joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

WATERPROOFING WORK Total Amount 23,25,129.00 -

WATERPROOFING WORK Total Amount 23,25,129.00 -

40 SUB 5.0 CLADDING WORK/ Wall f PT-CT-AR-PL-02-R5

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement

: 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished,

machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of

required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4

(1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment,

epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss

finish etc. completeat all levels.

42.1 8.2.2 Granite stone slab colour black, Cherry/Ruby red Sqm 7.00 5,136.30 4,997.62 5,847.22 40,930.51 -

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

43 8.3 machine polishing to edge to give high gloss finish etc.complete as per design approved by

Engineer-in-Charge.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and

drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basins / kitchens sink in kitchen

platform, vanity counters and similar location in marble / Granite /stone work including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium

8.32 Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the -

building , for all heights and all levels etc. including:

Structural analysis & design and preparation of shop drawings for pressure equalisation or rain

(a) screen principle as required, proper drainage of water to make it watertight including checking Sqm 80.63 5,051.05 4,914.67 5,750.17 4,63,607.12 -

of all the structural and functional design.

CLADDING WORK Total Amount 21,82,299.65 -

CLADDING WORK Total Amount 21,82,299.65 -

46 SUB 5.0 WOOD & PVC WORK Dwg Ref PT-CT-AR-PL-01-R5

Providing wood work in frames of doors, windows, clerestory windows and other frames,

47 9.1 wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia

& length ( hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and well

matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on

both faces of shutters:

48.1 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 80.00 2,392.65 2,328.05 2,723.82 2,17,905.33 -

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured).

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Providing and fixing wooden moulded beading to door and window frames with iron screws,

plugs and priming coat on unexposed surface etc. complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

51 9.53 diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm Each 216.00 228.65 222.48 260.30 56,224.25 -

1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than

52 9.100 grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less

53 9.96 than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts

and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than

54 9.97 grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six

55 9.103 levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) Each 18.00 868.95 845.49 989.22 17,805.98 -

aluminium lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic

56 9.101 coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and

shade, with necessary screws etc. complete.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll form

G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50

mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm

wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically

within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre

by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to

wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre

to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on

studs, floor and ceiling channels at the spacing of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S.

fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be

9.105.1 provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head Sqm 470.00 2,131.10 2,073.56 2,426.07 11,40,250.81

screws, including jointing and finishing to a flush finish with recommended jointing compound,

jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of

primer suitable for board as per manufacture's specification and direction of engineer in charge

all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass

Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS

certification marks)

57 9.147.C1 Fixed window / ventilator without mullion / transom.

57.1 9.147.C1.3Using R3 series with frame (55mm & above ) x (45mm & above). (Height upto 2.5 metre) Sqm 2.00 7,080.05 6,888.89 8,060.00 16,120.00

Providing and fixing in position 12 mm thk Toughened Clear Glass in partition panels by using

various glass fittings of approved make (DORMA / HAFELE / HETTICH) to be fixed with

necessary fittings on the ceiling duly finished without giving any load on the false ceiling by

using necessary hardware of Dorma / Hafele make what ever necessary and required numbers to

61 M.R complete the job in all respect. Rate including cost of door opening with approval hardware Sqm 350.00 6,385.34 - 22,34,867.58

such as patch fitting lock, handle etc of approved make but without cost of floor spring.

Contractor is advised to submit working drawing with details of approved make patch fitting,

sizes of glass panels etc and take approvals of consultants before execution of works. All

complete as per detail drawing, as specified and as

Providing and fixing Toilet cubical of 2100mm height including bottom 100mm gap standard

dimension which includes 600mm door size width) made up of thermosetting resign treated high

pressure ,self supporting decorative compact laminates with permanently incorporate anti-

bacterial agents(under JIS Z2801:2000 certification) during manufacturing .Compact board

62 NDSR should be resistance to water immersion through permissible increase on thickness and mass Nos 12.00 45,844.44 - 5,50,133.31

<0.60% and board density >1.35kg/cm3 and fulfilled the criteria of green guard gold

certification and manufactured under EN438-2&3:2005 standard. 12mm thick compact board

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

certification and manufactured under EN438-2&3:2005 standard. 12mm thick compact board

should be Moisture resistant, Impact resistant, termite resistant ,Scratch resistant ,Weather and

climatic shock resistant.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm

deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with

63 8.1 chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete Nos 8.00 4,051.85 3,942.45 4,612.67 36,901.33 -

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction

of Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade

WOOD WORK/ GLASS PARTITION Total Amount 17,48,115.00 27,85,000.89

WOOD WORK/ GLASS PARTITION Total Amount 17,48,115.00 27,85,000.89

64 SUB 7.0 FLOORING WORK DWG Reff PT-CT-AR- PL 01 Floor-1

Providing and laying flamed finish Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement

slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge :

67.1 11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 3,150.00 3,186.70 3,100.66 3,627.77 1,14,27,479.11 -

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber mallet for placing the tiles gently and

70 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

71 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Grouting the joints of flooring/wall tiles having joints of 3 mm width, using epoxy grout mix of

72 11.48 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per

kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge.

FLOORING WORK Total Amount 1,19,15,359.52 -

FLOORING WORK Total Amount 1,19,15,359.52 -

73 SUB 8.0 ROOFING WORK DWG Reff PT-CT-AR-PL 01-R2 &R3

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer

coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with

G.I. limpet washers filled with white lead, including a coat of approved steel primer and two

coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical

or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to

size and shape wherever required.

12.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m² Sqm 130.00 1,087.65 1,058.28 1,238.19 1,60,964.91

Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq.

decimeter for chimney stacks, sky light etc.:

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron

12.7 brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections

with rain water pipes complete

12.7.1 0.80 mm thick with zinc coating not less than 275 gm/m² Mtr 15.00 1,029.65 1,001.85 1,172.16 17,582.46

Supply and Installation of Metal Grid ceiling system which includes T grid Wall angle of

24mmx24mmx 0.4mm thick shall be screw fixed to brick wall/partition with the help of

approved screws at 600mm centers. Then suspending Main T grid of 24mmx38mmx 0.33mm

thick of length 3600mm is hung with adjustable level clips 80x30x0.6mm & 4mm diameter GI

rod which are connected to Soffit Cleat 27x37x1.6mm and Approved 50mm dash Fasteners

@1200mm centers or as approved from RCC Slab. The Cross T of 15mmx32mm of 1200mm

length shall be interlocked between main T Grid at 600mm centers to form 1200 x 600mm

modules. All Mail T, Cross T and Wall Angle have a galvanization of 120 GSM (both sides

75 M.R inclusive). 600x600mm modules to be formed by click fitting Cross T of 15mmx32mm of sqm 3,700.00 3,298.87 - 1,22,05,809.46

600mm length centrally between the 1200mm cross T’s.

Then Perforated Aluminium Lay in ceiling Panels with Perforation of 1.8mm dia with centre to

centre distance of 5mm having open area of 20% Powder coated Galvanized steel 50 to 60

microns polyester paint thickness perforated White/Black Colour ceiling tiles of size

595mmx595mm (Nominal) having thickness of 0.7mm, lip 11.5 mm and Drop of 8mm.

Perforated Aluminium tiles have black nonwoven acoustic Fleece of 60 GSM on the rear side

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Perforated Aluminium tiles have black nonwoven acoustic Fleece of 60 GSM on the rear side

with 0.50 NRC. These tiles shall be placed into the above grid of size 600x600mm. Entire work

should be carried out as per Manufacturer's guidelines and/or instruction of project in-charge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (

galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum)

sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm

thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to

form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm

made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel

to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles

of approved texture in the grid including, required cutting/making, opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended

from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm

dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level

clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom

exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete

for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm

and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both

sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise

Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60

microns (minimum), including factory painted after bending and perforation, and backed with a

black Glass fiber acoustical fleece.

ROOFING WORK Total Amount 4,00,028.45 1,22,05,809.46

ROOFING WORK Total Amount 4,00,028.45 1,22,05,809.46

79 SUB 9.0 STEEL WORK

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,

80 10.2 including cutting, hoisting, fixing in position and applying a priming coat of approved steel Kg 30,000.00 133.70 130.09 152.21 45,66,162.51 -

primer all complete.

81 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in

81.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 150.00 172.60 167.94 196.49 29,473.43 -

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required)

and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing

82 10.28 with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required Kg 200.00 772.40 751.55 879.31 1,75,861.58 -

size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Total Carried over to summary 47,71,497.52 -

86 ALUMINIUM WORKS DWG Reff:PT-CT-AR-PL-01-R5

Providing and fixing Factory Made sensor based automatic sliding door of 1.8m X2.1 m with

openable portion of minimum 5'-0" with approved make or as suggested by architect with all

modern facilities as/specification .Unique Features: - Stainless Steel running track for rollers

- Concealed glass clamping with positive hold (Anti-sagging feature)

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor

87 21.18 spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, Sqm 60.00 5,325.90 5,182.10 6,063.06 3,63,783.47

all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be

paid separately)

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm

long with SS screws etc .complete as per direction of Engineer-in-Charge

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles

89 21.13 (best make of approved quality) for aluminium doors including necessary cutting and making Nos 23.00 528.85 514.57 602.05 13,847.11 -

good etc. complete.

ALUMINIUM WORKS Total Amount 4,13,578.72 13,30,000.74

ALUMINIUM WORKS Total Amount 4,13,578.72 13,30,000.74

90 Structural Glazing and Aluminium DWG Reff:PT-CT-AR-PL-01-R5

Providing and supplying aluminium extruded tubular and other aluminium sections as per the

architectural drawings and approved shop drawings , the aluminium quality as per grade 6063

T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming

25.1 to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item

includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of

91 extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of Kg 6,550.00 414.30 403.11 471.64 30,89,263.37

aluminium extruded section shall be taken for purpose of payment.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized

92 25.2 system of structural glazing (with open joints) for linear as well as curvilinear portions of the Sqm 610.00 3,510.50 3,415.72 3,996.39 24,37,796.87

building for all heights and all levels, including:

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-

sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as

93 required and specified, comprising of an outer heat strengthened float glass 6mm thick, of

approved colour and shade with reflective soft coating on surface # 2 of approved colour and

25.3 shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide,

dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all

complete for the required performances, as per the Architectural drawings, as per the approved

shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be

assembled in the factory/ workshop of the glass processor.

For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of

the grooves and weather silicone sealant) provided and fixed in position, shall be measured in

93.1 (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Sqm 610.00 3,718.30 3,617.91 4,232.95 25,82,099.44

Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible

Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection

external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/ m2 degree K

etc. The properties of performance glass shall be decided by technical sanctioning authority as

per the site requirement.

Structural Glazing and Aluminium Total Amount 81,09,159.68 -

Structural Glazing and Aluminium Total Amount 81,09,159.68 -

SH-15 Furniture work Dwg Reff: PT-CT-AR-PL 01-R5

Providing & fixing 3 seater visitor chair made with PU soft padded leather cushion seat & back

material over top quality MS steel. Silver plating on Arms 7 legs. Seating height 17"

Providing and fixing Check in Counter as per the Architectural Dwg of 3045 L 2300W 1408 mm

MR Made withn Commercial ply of 19 mm Finished 1 mm Laminte of Approved make Etc As the Nos 50.00 1,09,087.52 54,54,376.13

Direction of Engineer incharge

Providing and fixing of medium back mesh Chair for Executive With High Comfort Seating,

Height Adjustable Seat & Heavy Duty Metal Base (Brown)Internal seat material: Wood | Filled

MR with - High-Density Foam | Upholstery cover: Leatherette | Color: Brown | Size:high Back | Tilt Nos 1.00 19,808.99 19,808.99

Lock | Gas-lift: Class 4 | Base: Heavy Duty Metal Base | | Maximum Weight Capacity: Up to 120

Kgs | Height Adjustment : 33-36 INCHES | Seat Height : 20-23 INCHES | Seat Width:19

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Kgs | Height Adjustment : 33-36 INCHES | Seat Height : 20-23 INCHES | Seat Width:19

INCHES |Seat Depth: 17 INCHES | Back Height : 18 INCHES Polyfill fiber Insdie for extra

comfort Heavy duty cantilever Metal frame shiny Silver arms bonded leatherette All the

Products are BIFMA Certified, 3 years of Warranty, 3 Stage QC Check. ISO 9001:2015

Greenguard Compliance

Providing and fixing of medium back Leatherette Visitor Chair for HODs With High Comfort

Seating, Height Adjustable Seat & Heavy Duty Metal Base (Brown)Internal seat material: Wood

MR | Filled with - High-Density Foam | Upholstery cover: Leatherette | Color: Brown | Size:high Nos 14.00 13,205.99 1,84,883.86

Back | Tilt Lock | Gas-lift: Class 4 | Base: Heavy Duty Metal Base | | Maximum Weight Capacity:

Up to 120 Kgs | Height Adjustment : 33-36 INCHES | Seat Height : 20-23 INCHES | Seat

Width:19 INCHES |Seat Depth: 17 INCHES | Back Height : 18 INCHES Polyfill fiber Insdie for

extra comfort Heavy duty cantilever Metal frame shiny Silver arms bonded leatherette All the

Products are BIFMA Certified, 3 years of Warranty, 3 Stage QC Check. ISO 9001:2015

Greenguard Compliance

Providing and Supplying 2Seater fabric sofa Dimension:

MR The frame is made of high-quality wood .The seat cushion is made up of foam of density Nos 2.00 42,244.50 84,488.99

45kg/cum. Leg assembly is a welded assembly made of stainless steel tube. The seat, arms and

back are upholstered at all touch points and synthetic / Same at all non-touch points, etc. The

Company Should be ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, Greengaurd

Compliance and ANSI/BIFMA E3-2014 Certified. The item should be as per certifications and

aprroval of project architect /consultant & engineer in charge

Providing and Supplying Single Seater fabric sofa Dimension:

MR The frame is made of high-quality wood .The seat cushion is made up of foam of density Nos 2.00 24,101.81 48,203.61

45kg/cum Leg assembly is a welded assembly made of stainless steel tube. The seat, arms and

back are upholstered at all touch points and synthetic / Same at all non-touch points, etc. The

Company Should be ISO 9001:2015, ISO 14001:2015, OHSAS 45001:2018, Greengaurd

Compliance and ANSI/BIFMA E3-2014 Certified. The item should be as per certifications and

aprroval of project architect /consultant & engineer in charge

Manufacturing and placing of Single Bed size (1800x900mm) with storage: HOSTEL BED

900 (W) x 650(H) x 1800(L), Under structure: - The legs are made of Square tube of size 25 x

made out of MS pipe with a thickness of 1.2mm. The corner brackets are made of 2mm thick

Three nos. of Horizontal stiffeners are provided and made of Square tube of size 25 x 25mm

of MS pipe with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it

transfer the load to the ground and add to the strength and stability of the complete structure. All

components are powder coated with 50-60 Microns DFT.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

components are powder coated with 50-60 Microns DFT.

Side Panel: - The side panels are made up of 18mm thick commercial ply with both side

laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of

side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for

required length to add rigidity to the structure. Head Board :- The head board is made up of

18mm thick prelam particle board with both side

decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The

size is 1000 x 650mm.

Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side

decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The

size is 1000 x 450mm.

Bed Base: - The Bed Base is made up of 12mm thick Commercial Ply with both side White

Furniture work Total Amount 73,58,883.16

Furniture work Total Amount 73,58,883.16

1 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat

and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings &

C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and

mosquito proof coupling of approved municipal design complete, including painting of fittings

and brackets, cutting and making good the walls and floors wherever required : W.C. an with ISI

marked white solid lastic seat and lid

2 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 8.00 8,006.60 7,790.42 9,114.79 72,918.35

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with

100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing

cistern, including flush pipe, with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and fixtures complete, including

cutting and making good the walls and floors wherever

4 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 9.00 6,767.40 6,584.68 7,704.08 69,336.68

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

5 17.5 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm

with white PVC automatic flushing cistem, with fittings, standard size C.P brass flush pipe,

spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap

with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting

and makin ood the walls and floors wherever required

6 17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistem Each 21.00 12,071.75 11,745.81 13,742.60 2,88,594.62

Providing and fixing Under counter with white glazed vitreous china wash basins with C.P.

brass eurometic self closing pillar tap with flow rate of 3.8 LPM complying to Green Building,

C.P. brass waste and unions and sealing of joints between wash basins and counter slabs around

the wash basins with Silicone rubber cement of approved make of matching colour all complete

including cutting and making good the walls and floors where required.

Providing and fixing Urinal Division Plate with table rubbed, edges rounded and polished, of

size 900 x 450 mm, fixed in urinal partitions by cutting a chase of appropriate width with chase

cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of

Engineer-in-charge and finished smooth.

Each Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality

10 17.69.1 Waste coupling 31 mm dia of 79 62mmbreadth weighing not less than 45 gms Each 17.00 115.30 112.19 131.26 2,231.40

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality

& make and as per the direction of Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Providing and fixing of Health faucet with regulator with flexible pipe 1.0 m long, wall hooked

14 MR-3 complete as required with flow rate of 3.8 LPM complying to Green Building requirements. Each 8.00 1,619.80 12,958.43

Make: Jaquar -Model No: ALD-565 or equivalent make.

Providing and fixing of 15 mm dia CP brass 2way bib cock with CP wall flange of approved

quality with flow rate of 3.8 LPM complying to Green Building requirements.

16 17.34 Providing and fixing toilet paper holder :

Providing and fixing mirror of superior glass (of approved quality) and of

18 17.32 required shape and size with plastic moulded frame of approved make and

shade with 6 mm thick hard board backing

Providing and fixing P TMT towel rail complete with brackets fixed to

20 17.73 wooden cleats with CP brass screws with concealed fittings arrangement

of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88

mm, weighing not less than 190 gms.

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm,

height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing of C.P. brass twin coat hook with PVC rawl plug & C.P. brass screw

complete as required.

Providing and fixing C.P. brass angle valve for basin mixer of approved quality conforming to

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

26 5 inch Stainless Steel Glossy Finish Silver Round Plain Floor Drain Grating

Supply of solid state, no touch operating, fully hygienic hand drier of approved shade with

28 MR-7 single blower, with time delay, summer & winter control, music while drying, volume ON/OFF Each 6.00 7,296.35 8,609.70 51,658.18

controls complete as required.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height

of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply including all CPVC plain & brass threaded fittings This includes

jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of

joints complete as per direction of Engineer in Charge as per IS code 15778.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

36 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :

Providing and fixing gun metal gate valve with C.I. wheel of approved

quality screwed end

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with

47 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to

IS 13095 of following sizes as required :

DSR- Providing and fixing enclosed type water meter (bulk type) conforming to

49 2023/18 IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber

.6 insertions etc. (The tail pieces if required will be paid separately) :

Fixing Water meter and stop cock in G.I. pipe line including cutting and

51 18.14 threading the pipe and making long screws etc. complete (cost of water Each 2.00 812.30 790.37 924.73 1,849.46

meter and stop cock to be paid separately).

E&M- Providing and fixing in position the industrial type pressure gauges with gun metal/ brass valves

2022/16 complete as required

Water Level Indicator with Musical Alarm on Tank Full and Buzzer on Tank

Empty with 20 metres of Sensor Wire

Providing and placing on terrace (at all floor levels) polyethylene water storage

tank, IS : 12701 marked, with cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but without fittings and the

base support for tank

Supplying and installing following size of perforated painted with powder coating M.S. cable

trays with perforation not more than 17.5%, in convenient sections, joined with connectors,

suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders

etcas required.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

57 4.1.2 150mm widthX 50 mm depthX 2.0mm thickness Metre 62.00 604.00 587.69 687.60 42,631.18

2022/18 Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe

.8 conforming to IS 1239 including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more coats Of

synthetic enamel paint of required shade complete as required

60 SUB-HEAD-I: PLUMBING PUMP

61 PUMPS - Raw Water, Water Supply Pumps

Note- All pumps to be provided with mechanical seal and wearing ring and mechaical seal.

Performance curve should be got approved before placing the order. (All pumps should be

supplied with base frame) (All level controller , water meter & Pumps shall be BMS

compatible. )(all pumps shall be supplied with vibration pad).

Providing & Fixing, testing and commissioning mono block pump, 3 Phase 440 volts/50 cycles

per second with TEFC induction motor of the following capacity with mechanical seal.

The pump shall be selected for performance at best efficiency point. However, the pump

selection shall be suitable for performance with set point @ + 20% of the rated head.

65 Domestic and Flushing water

66 Capacity: 150 LPM

67 Head : 35 Metre

68 HP -3 (Approx.) or as required.

69 Impeller:Bronze/ ss-316

70 Shaft : S/S 410

72 Mover : Electric Motor

73 Make: AS approved

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Water cooler with normal-cold- hot tap.inbuilt water purifier.water cooler capacity storage

capacity 80 L,cooling capacity 25 litre Body material Stainless Steel 1W+2C Faucets Cold &

Warm Water cooler ,Refrigerant : R22,Dimension : 1145x812x612 mm Voltage : 230 V

Frequency : 50 Hz

Oasis M8WRY Drinking Water Fountain,Hot and Cold Both,Capacity

50 L,Automation Grade-Automatic,MaterialStainless Steel

SEWERAGE & DRAINAGE NETWORK

Providing, laying, jointing & testing of following P.V.C. pipes with solvent cement joint for 8

77 kg/ sq. cm. pressures including testing of joints, cost of jointing materials etc. complete in all

respect.(class B) IS: code

78 MR-12 40 mm diametre metre 41.00 241.04 9,882.80

Constructing brick masonry road cath basin 450x450x77.5 cm with bricks in cement mortar 1:4

(1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design :

82 MR-15 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 4.00 6,889.31 27,557.25

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Providing and fixing square-mouth S.W. gully fap class SP-I complete

with C.I. grating brick masonry chamber with water tight C.I. cover with

frame of 450 x 450 mm size (inside) the weight of cover to be not less than

4.50 kg and frame to be not less than 2.70 kg as per standard design:

84 19.4.3 180x150 mm size P type

85 19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class desi nation 7.5 each 4.00 2,802.15 2,726.49 3,190.00 12,759.98

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with

86 19.7 R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone

aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-

III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm

87 19.7.1 internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover

23 kg and weight of frame 15 kg) :

88 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 8.00 12,770.55 12,425.75 14,538.12 1,16,304.97

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm

89 19.7.2 internal diameter, total weight of cover and frame to be not less than 116 kg (weightof cover 58

kg and weight of frame 58 kg)

90 19.7.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 2.00 26,405.50 25,692.55 30,060.29 60,120.57

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

91 19.21 Making connection of drain or sewer line with existing manhole including breaking into and

making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded

stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3

(1cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary

channels for the drain etc. complete for pipes 100 to 250mm dia.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1

m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a

coat of neat cement, rounding the edges and making and finishing the outlet complete

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :

94 12.41 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for

thermal expansion (i) Single socketed pipes

Total Amount 2,27,195.27 77,537.60

Total Amount 2,27,195.27 77,537.60

Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop modules and

capable Of supporting not less than 240 devices (including detectors) and minimum 120

detectors per loop and loop length up to 2 km, network communication card, minimum 320

character graphics/ LCD display with touch screen or other keypad and minimum 4000 events

history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48

hrs back-up with 24 volt sealed maintenance free batteries With automatic charger. The panel

Shall have facility to connect printer to printout log and facility to have seamless integration

with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA

System) and shall be complete with all accessories . The panel Shall be compatible for IBMS

system with open protocol BACnet/ Modbus over IP complete a sifications

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Supplying, installation. testing & Of intelligent analog addressable photothermal detector

complete with mounting basecomplete as required.

Supplying, installation, testing & commissioning Of repeater panel wih 320 character/ Touch

screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as

Supplying, installation, testing & commissioning Of addressable manual call point complete as

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

10 17.5.1 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete metre 1,150.00 359.00 349.31 408.69 4,69,992.57

MR-9 Electric Driven Pump

Supplying of Electric driven Main Fire Pump suitable for automatic operation and consisting of

(a) following, complete in all respects, as required :

Horizontal type, multistage, centrifugal, split casing pump of cast iron

(b) body & bronze impeller with stainless steel shaft, mechanical seal conforming

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Suitable HP Squirrel cage induction motor, TEFC, synchronous speed

(c) 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection

for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.

M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as

(e) Suitable cement concrete foundation duly plastered with anti vibration pads. 3,67,312.76 3,67,312.76

2280 Ipm at 70 m Head Each 1.00

MR-10 Diesel Engine Pump

Supplying diesel engine driven main fire pump suitable for automatic operation and consisting

of following, complete in all respects, as required : (Diesel Driven Pump)

Horizontal type, multistage, centrifugal pump of cast of iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.

(c) Suitable HP, 1500 RPM water cooled with radiator, diesel engine

conforming to relevant IS standard complete with auto starting mechanism, 12 124 volts electric

starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly

insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential

silencer, instruments and protection as per standard specification, stop solenoid for auto stop in

the event of fault with audio indications, painted with post office red colour etc. as required.

(d) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.

(e) Suitable cement concrete foundation duly plastered and with anti vibration pads.

MR-11 Jockey Pump

Supplying, electric drive pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump Of cast iron body and bronze impeller with

stainless steel shaft, mechanical seal conforming to IS : 1520.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3

(c) phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted

type with Class-'F' insulation, conforming to IS : 325.

(d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.

(e) Suitable cement concrete foundation duly plastered and with anti vibration ads.

46 18.6 Providing laying, testing & commissioning Of 'C' Class heavy duty MS Pipe conforming to IS

1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground

including welding, excavation & providing cement as supports, anticorrosive treatment with

coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as

Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS

1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and

fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade complete as required

Painting with ready mixed red oxide zinc chromate of approved brand G.I. pipes and fittings

57 with synthetic enamel red colour paint with two coats over a ready mixed priming coat, both of

approved quality for new work :

58 MR-9 25 mm diameter pipe metre 930.00 40.12 37,311.60

59 MR-10 32 mm diameter pipe metre 120.00 48.38 5,805.60

60 MR-11 40 mm diameter pipe metre 125.00 54.28 6,785.00

61 MR-12 50mm diameter pipe metre 105.00 63.72 6,690.60

62 MR-1 65 mm diameter pipe metre 85.00 66.08 5,616.80

63 MR-2 80 mm diameter pipe metre 115.00 71.98 8,277.70

64 MR-3 100 mm diameter pipe metre 115.00 83.78 9,634.70

65 MR-4 150 mm diameter pipe metre 155.00 92.04 14,266.20

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Supplying and fixing single headed intemal hydrant valve with instantaneous

66 18.9 Gunmetal/StainIess Steel coupling of 63 mm dia with iron wheel ISI marked conforming to IS

5290 (Type -A) withblank Gunmetal/Stainless Steel cap and chain as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN I .6 rating with

68 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to

IS 13095 of following sizes as required •

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with

71 18.13 orifice of required size to fitted between flange & landing valve Of external and internal Each 4.00 1,321.00 1,285.33 1,503.84 6,015.36

hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Providing, installation, testing and wmmissioning of non-return valve of following sizes

confirming to IS: 5312 complete with rubber qasket. Gl nuts. washers etc.as required :

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red,

conforming to IS 884 complete with the following as required.

20 mm nominal internal dia water hose thermoplastic (Textile einforced) type -2 as per IS:

20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the

equipmets on wall.

78 Drum and brackets for fixing the equipmets on wall. -

79 Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. -

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal

81 18.18 diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect -

hose pipe couplinq as required:

83 18.22 Providing & fixing Of pressure switch in MS, pipe line including connection etc. as required- Each 6.00 1,546.00 1,504.26 1,759.98 10,559.89

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

84 18.23 Providing & fixing flow switch in following sizes M.S. pipe including etc as required. -

Providing & fixing dial type (100 mm) pressure gauge with isolation ball valve suitable for

86 MR-5 working pressure of 250 PSI, short pieces, nipples, elbows, stainless steel 'U' tube & ball valve, Each 2.00 - 1,079.70 2,159.40

etc as required as per specifications.

87 18.24 Providing, fixing, testing & commissioning of installation control valve of cast iron body, -

brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm

and hydraulically driven mechanical gong bell to sound continuous alarm when the wet

riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch,

cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of

required size, flanges, orifice plate, gasket etc of follwing sizes as required:

89 18.25 Supplying, installation, testing & commissioning of sprinkler flexiblepipe (UL Listed) of -

stainless steel complete with 15 NPT on reducer thread with maximum working pressure Of 175

PSI test pressure Of 875 PSI (Burst) With branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center

bracket, stockbar of following sizes complete as required.

Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in

white finish UL Listed or FM approved complete as required.

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with

92 18.12 non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, -

gaskets and conforming to IS 780 of following sizes as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating

68 degree centigrade with required accessories :

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

104 Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S.

cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase ingernal

discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket

conforming ro IS:15683 finished externally with re enamel paint and fixed to wall with brackets

complete with internal charge.

106 Providing and fixing ABC Powder type fire extinguishers consisting of welded M.S. cylinderical

body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube

30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to

IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with

inernal charge.

Providing and fixing of ISI marked (IS: 940) portable chemical fire extinguisher, water (gas

108 pressure) type capacity 9 litres with gun metal cap and nozzle and complete in all respects

including initial fill and wall suspension brackets as required as oer soecifications.

FIRE FIGHTING Total Amount 46,76,159.10 15,21,271.34

FIRE FIGHTING Total Amount 46,76,159.10 15,21,271.34

1 Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for Cooling & Heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

2 The ODU shall have low noise condenser fans with extrenal static pressure of the outdoor unit

shall be more then 75 Pa to avoid hot air recirculation, auto address setting, auto check function

for connection error and complete with indoor and outdoor units with individual controller and

with fittings etc. The compressor and VRV/VRF Outdoor make should be same. For enhanced

energy savings the COP of each refrigerant circuit system mentioned below shall be 7.50

minimum at 50% load, at AHRI Condition in cooling mode. The unit shall also have feature to

automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respect

to load for better comfort and energy efficiency. (Unit shall deliver atleast 87% of mentioned

nominal capacity @ 43 Deg C). The Unit should have free phase technology so that unit can

work in case of phase reversal also without tripping of units.

3 Cost of lifting shifting of outdoor units to be considered in price.

4 Cost of anti corrosive coating on Outdoor units fins/piping to be considered in price.

AIR HANDLING UNIT-1 Stage Filtration-

Supply, Installation, testing and commissioning of factory fabricated double skin type Air

Handling Units Ceiling Mounted Type (BMS compatible) as per specifications given below:-

AHU Construction:- It shall be made out of 0.8 mm pre-plasticized/pre-coated Galvanised steel

sheet outside & 0.8 mm plain GSS sheet inside with 43 mm thick PUF insulation factory

injected between them by injection moulding m/c, with density not less than 38 kg/Cum

between them. Drain pan (made out of 2 mm stainless steel (SS Grade 304) sheet insulated with

19 mm think closed cell insulation(Nitrile/XLPE) & thermal break profile.

11 with Spring Vibration Isolator with Removable Frame Design, Ceiling Suspended Mounted

Hanger, 110 Lb Capacity

12 Supply Air Stream:-

1) Filter section consisting of pre filter. Pre-filter section shall be with non woven synthetic

media of 10 micron particle size with an efficiency of 90%.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

media of 10 micron particle size with an efficiency of 90%.

2) Plug type centrifugal Fan (with min. 70% efficiency) with blower motor, drive and flexible

duct connection both inside & outside the AHU & Duct. The supply fan shall be provided with

variable frequency drive (for motor H.P equal to or greater than 5 H.P)and input / output signal

compatible to BMS system.

3) 6 row deep cooling coil

4) Discharge plenum section.

5) Mixing Box comprising of damper & filter section for Floor mounted AHUs.

13 DX COIL- The cooling coil shall be made of copper with minimum thickness of 0.5mm and

aluminum fins shall be 0.15 mm minimum thick with minimum no. of fins 4.7/cm length of

coil. For coastal area like Mumbai fins shall be phenolic coated. Motors shall be suitable for 415

± 10% volts, 50 Hz, 3 phase AC supply & high efficiency(EFF-1/IE-2). Vibration isolation shall

be as per specifications and as shown on the drawings.

VFD:- VFD designed for HVAC applications with built-in PID controller, control panel (keypad

14 & display) , IP-42 enclosure (for outdoor applications) & IP-55 enclosure (for indoor

applications) for use on standard centrifugal plug fans. The display should be in alpha-numeric

characters and programming facility should be in user-friendly HVAC terminology. VFD’s shall

have built-in harmonic filters. Each VFD panel to be provided with digital display showing

electrical parameters like voltage, current and power consumption. Each VFD shall be installed

in a dedicated external enclosure and the inter connecting wires between driver and MCC shall

15 Sound level 65 db at the distance of 2 mtr.(maximum)

Squirrel cage induction motors suitable for 415 ± 10% volts, 50 Hz, AC supply & high

16 efficiency (IE-2/EFF-1 Efficiency), H.P of motor shall be as per actual selection meeting other

technical requirements.

17 MR-5 AHU- 3800 CFM 1-stage filtration , 9.5TR, 55 mm static pressuure. Nos. 32 4,27,616.47 13683727

18 MR-6 AHU- 3400 CFM 1-stage filtration , 8.5TR 55 mm static pressuure. Nos. 9 3,74,635.72 3371721

19 MR-7 AHU- 3200 CFM 1-stage filtration, 8TR,55 mm static pressuure. Nos. 1 3,70,040.19 370040

20 MR-8 AHU- 3000 CFM 1-stage filtration, 7.5TR ,55 mm static pressuure. Nos. 2 3,54,634.31 709269

21 MR-9 AHU- 2600 CFM 1-stage filtration.6.5TR, 55 mm static pressuure. Nos. 2 2,99,641.56 599283

22 MR-10 AHU-2400 CFM 1-stage filtration. 6TR, 55 mm static pressuure. Nos. 1 2,79,649.05 279649

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

23 MR-11 AHU- 1000 CFM 1-stage filtration. 2TR,55 mm static pressuure. Nos. 1 1,78,785.18 178785

25 VRF/VRV indoor AC unit (wall mounted):- Supply installation testing and commissioning of

wall mounted indoor split unit comprising of copper evaporator, electronic expansion valve,

blower, motor, filter pad, auto air swing louvers, and temperature & on/off display with

provision of discharge angle setting by wireless remote controller including internal wiring,

controls complete as per specification. (Single phase/three phase)

26 VRF/VRV indoor ACunit (wall mounted)

27 MR-12 1.2 TR star rating 5 star Nos. 7 44,892.14 314245

28 MR-13 1.5 TR star rating 5 star Nos. 1 51,953.52 51954

29 MR-14 2.08 TR star rating 5 star Nos. 3 63,368.99 190107

30 Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction andLiquid lines, all accessories as per specifications etc. as required :

31 MR-15 28.6mm dia with 19mm thick insulation Rmt 1360 1,439.10 1957174

32 MR-16 25.4mm dia with 19mm thick insulation Rmt 200 1,247.22 249444

33 MR-17 22.2mm dia with 19mm thick insulation Rmt 110 979.96 107795

34 MR-18 19.1mm dia with 19mm thick insulation Rmt 55 890.87 48998

35 MR-19 15.9mm dia with 13mm thick insulation Rmt 1400 870.31 1218437

36 MR-20 12.7mm dia with 13mm thick insulation Rmt 230 712.70 163920

37 MR-21 9.5mm dia with 9mm thick insulation Rmt 125 575.64 71955

38 MR-22 6.4mm dia with 9mm thick insulation Rmt 10 479.70 4797

Suppli,installation test & commisisoning ceiling supply round jet diffuser,Aluminium painted

39 grill,include the duct neck as per duct section ,adaptorconnection to main duct

,ragister,hanging,supporting all reaquired accessories and work required to complete the work

40 MR-23 Round Jet Diffuser size of 12" No 21 1,849.59 38841

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal

rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers,

vanes, hangers, supports etc. as per approved drawings and specifications of following sheet

thickness complete as required. Note- Quantity may vary as per final rcp plans.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Pre-insulated aluminum ductwork Clw fittings, supports and proprietary bracketing as -20mm

thickness with aluminium profile-For supply and return ductwork installed inside

Supply, installation, testing and commissioning of GI volume control duct damper complete

45 16.13 with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. Sqm 70 7046 6855.76 8021.24 561486.58

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium

volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but

without volume control dampers complete as required.

Supplying, fixing testing commissioning of Supply air diffusers of powder coated aluminium

with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium

without volume control dampers with anti smudge ring & removable core.

50 Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and

return air path as and where required of required sizes i/c control wiring,the damper shall be

motorized and spring return so as to close the damper in the event of power failure

automatically and open the same in case of power being restored. The spring return action shall

be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event

of fire signal complete as required and as per specifications.

INSULATION MATERIAL FOR INTERNAL AND EXTERNAL DUCT

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed

cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for

Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile

rubber tape insulation complete as per specifications and as required. GLASS CLOTH

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

ACOUSTIC LINING AT DUCT START FROM AHU

55 16.21 Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin Sqm 150 708 688.88 805.99 120899.14

bonded glass wool having density of 32 kg/m3, with 25 mm X 25 mm Gl section of 1.25 mm

thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick

perforated aluminum sheet fixed to inside surface Of ducts with cadmium plated nuts, bolts,

stick pins, CPRX compound etc. com lete as uired and as er ifications.

Supply and fixing of MS Stand for Outdoor Units. MS stand to be painted with red oxide &

Supply, Installation, Testing & Commissioning of 250 mm dia preinsulated flexible duct with

57 MR-26 end clamps and Aluminum foil on both side as required in various sizes as below. The duct shall Rmt 230 672.27 154622

fire retardant UL standard approved.

58 ELECTRIC PANEL FOR ODU

59 FOR FIRST FLOOR EMBARKEMENT

SITC of OUTDOOR type electrical panel for VRF Out door units with incoming feeder, out

60 MR-27 going feeder for outdoor units, metering feeder, busbar chamber and cable chamber. Two No 1 3,43,327.79 343328

outgoing feeder shall be spare. All out going and incoming feeders shall have MCCB/ELCBs

INCOMING: 500A TP MCCB 36KA, TM WITH OL/SC PROTECTIONS, SPREADERS &

ROM –1NO,METERING: MFM, 360/5 CT 3NO, R Y B PHASE INDICATION LAMPS WITH

1) 63A FP MCB – 12 NO (VRF OUTDOOR UNIT) & 1 SPARE

61 FOR FIRST FLOOR DIS EMBARKEMENT

SITC of OUTDOOR type electrical panel for VRF Out door units with incoming feeder, out

62 MR-28 going feeder for outdoor units, metering feeder, busbar chamber and cable chamber. Two No 1 2,46,017.32 246017

outgoing feeder shall be spare. All out going and incoming feeders shall have MCCB/ELCBs

INCOMING: 350A TP MCCB 36KA, TM WITH OL/SC PROTECTIONS, SPREADERS &

ROM –1NO,METERING: MFM, 400/5 CT 3NO, R Y B PHASE INDICATION LAMPS WITH

1) 63A FP MCB – 7 NO (VRF OUTDOOR UNIT) & 1 SPARE

63 FOR GROUND AND MAZZANE FLOOR

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

SITC of OUTDOOR type electrical panel for VRF Out door units with incoming feeder, out

64 MR-29 going feeder for outdoor units, metering feeder, busbar chamber and cable chamber. Two No 1 2,04,900.22 204900

outgoing feeder shall be spare. All out going and incoming feeders shall have MCCB/ELCBs

INCOMING: 300A TP MCCB 36KA, TM WITH OL/SC PROTECTIONS, SPREADERS &

ROM –1NO,METERING: MFM, 400/5 CT 3NO, R Y B PHASE INDICATION LAMPS WITH

1) 63A FP MCB – 6 NO (VRF OUTDOOR UNIT) & 1 SPARE

67 MR-30 SITC,4 POLE BREAKING CAPACITY 16KA,415V,50HZ No 47 7,003.61 329170

63A,DP100mA WITH 240/415V,50HZ WITH 10kA SHORT CIRCUIT WITHSTAND

70 CONTROL PANEL IN AIR HANDLING UNIT

Design, manufacture, supply, installation, testing and commissioning of the following cubicle

71 type, wall mounted control panels including anchoring into the wall, wiring and earthing

terminating into MPCB in each panel shall be provided by the electrical contractor.

All outgoing shall be provided with Stop / Manual /Auto selector switch to facilitate operation

72 through BAS. All starters shall be provided with potential free Contact for Connections to

Building Automation System.

73 single phase preventer (Electronics type) as per the ratings given below.

74 Terminal block for power distribution.

75 Power Contactor.

Phase indicating lights and indicating light for ON/OFF/TRIP status phase sequence relay shall

also be provided.

77 96 mm x 96 mm digital voltmeter and ammeter with selector switches.

78 Suitable rating starter required as a bypass arrangement in case of VFD failure.

79 Time delay relay for delayed automatic restart of air handling unit motor.(0-180 Sec).

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Wiring for microswitch for starting / stopping the fan when fire damper closes / Power supply

for fire damper control panel.

For on/off/remote and local operation, 3 pole single throw switch shall be provided in each AHU

panel to facilitate override of the automatic operation.

82 The number of AHU control panels shall be as follows.

83 FOR FIRST FLOOR

84 MR-32 INCOMING: 1000A TP MCCB 36KA, TM WITH OL/SC PROTECTIONS, SPREADERS & No 1 3,98,439.10 398439

ROM –1NO,METERING: MFM, 400/5 CT 3NO, R Y B PHASE INDICATION LAMPS WITH

1) 40A FP MCB – 35 NO (VRF IDU UNIT) & 7 SPARE

85 FOR GROUND FLOOR

86 MR-33 INCOMING: 350A TP MCCB 36KA, TM WITH OL/SC PROTECTIONS, SPREADERS & No 1 2,67,583.23 267583

ROM –1NO,METERING: MFM, 400/5 CT 3NO, R Y B PHASE INDICATION LAMPS WITH

1) 40A FP MCB – 16 NO (VRF OUTDOOR UNIT) & 4 SPARE

87 TPN -DISTRIBUTION BOARD

88 MR-34 SITC,Distribution Board ,Power Coated Suitable With MCB -12 WAY (3-Phase outlet) No 6 3,527.85 21167

SITC of one number PVC insulated, PVC sheathed and XLPE insulated armoured, Multicore

89 Copper Conductor, power cable of 1.1 kV grade as per IS 7098 (Part 1) 1988 of sizes as per

below laid on cable tray as required. (Pricing of cable tray included)

90 MR-35 4C X10 sqmm Armoured Meter 120 872.78 104733

92 SITC ,cable for embarkement ODU

93 MR-36 3.5 C X 25 sqmm Al- Armoured Meter 390 644.86 251495

95 cable for Disembarkement and Ground Floor ODU

96 MR-37 3.5C X 95 sqmm Al- Armoured Meter 300 1,093.32 327996

97 MR-38 3Cx 2.5 sqmm flexibile cu cable Meter 448 413.52 185256

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

98 MR-39 Supply and Installation of M.S Structure for Outdoor Units. kg 360 301.53 108549

DSR-EL-Supplying and fixing of following sizes of steel along with accessories in surface/recess

99 2022/1. including painting in case of surface conduit, or cutting the wall and making good the same in

20 case Of recessed conduit as required.

101 Supply, Installing, testing and commissioning of UPVC pipe for condensate complete with 9mm

thick nitrile rubber insulation covered with inter woven glass cloth for CAHUs/ FCU, cut to

required length with necessary, clamps, supports, hangers, fittings such as bends, tees, reducers

etc to nearest drain point complete as per technical specifications with all the necessary

mounting accessories as required for complete installation.

HVAC Total Amount 62,92,518.95 4,84,49,297.05

HVAC Total Amount 62,92,518.95 4,84,49,297.05

Electrical Works

Sl. DSR- DSR Amount NDSR Amount

Description of Item Unit Total Qty 2022/2023/M NDSR Rate

A Distribuition Boards

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution

board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

1 2.3.3 12 way, Double door (For EM )-Location-Electrical room GF & FF Each 3.00 2,315.00 2,395.08 2,802.24 8,406.72

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

2 2.4.3 8 way(4+24 ),Double Door(for Power & Lighting)-Location-Electrical room GF & FF Each 9.00 5,967.00 6,173.40 7,222.88 65,005.94

2.5 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN

MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A,

tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without

MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3

phase outlets are required.)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature

2.10 circuit breaker suitable for inductive load of following poles in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

4 2.10.1 Single pole(6-32 A)-Location-Electrical room DB GF & FF Each 318.00 256.00 264.86 309.88 98,542.05

Supplying and fixing following rating, Double pole, 240 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

4A 2.12.1 40 A DP MCB-Location-Electrical room DB GF & FF Each 24.00 435.00 450.05 526.56 12,637.32

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the

existing MCB DB complete with connections, testing and commissioning etc. as required.

5 2.14.1 25A Location-Electrical room DB GF & FF Each 15.00 2,028.00 2,098.15 2,454.84 36,822.54

Providing and fixing following rating and breaking capacity and pole MCB with

thermomagnetic release and terminal spreaders in

existing cubicle panel board including drilling holes in cubicle panel,

making connections, etc. as requred.

6 MR-1 63 AMP TPN(Main incomer of DBs)-GF & FF Each 12.00 1,263.53 15,162.34

Providing and fixing following rating and breaking capacity and pole MCCB with

thermomagnetic release and terminal spreaders in

existing cubicle panel board including drilling holes in cubicle panel,

making connections, etc. as requred.

MR-1a 100 AMP TPN MCCB (Main incomer of DBs) fot VTPN DB Each 3.00 16,811.55 50,434.65

Total of Distribuition Boards 2,48,693.76 65,596.99

B Wiring System

Wiring for light point/ fan poinV exhaust fan point,' call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface I recessed medium class PVC conduit,

with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable etc. as required.

7 1.10.3 Group C(Ground Floor & First Floor) Each 270.00 1,467.00 1,517.74 1,775.76 4,79,455.60

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell pent

(Wthout independent switch etc.) with 1.5 sq. mm FRLS PVC insulated Single core Cable in

surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single cycle cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed pvc

conduit alongwith I NO. 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required,(For Raw Power)

Wiring for circuit/ submain wiring alongwith earth wire with the

1.14 following sizes of FRLS PVC insulated copper conductor, single -

core cable in surface/ recessed pvc conduit as required.

12 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire- For UPS /Emergency DB Metre 240.00 439.00 454.19 531.40 1,27,535.26

Total of Wiring/submain wiring 37,13,681.32 -

C Power Receptacles

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

15 1.24.4 3 pin 5/6 amp socket outlet(For UPS Power) Each 235.00 122.00 126.22 147.68 34,704.21

16 1.24.5 6 pin 15/16 amp socket outlet(For Raw power) Each 104.00 197.00 203.81 238.46 24,800.14

Supplying and fixing following sizes/ modules,GI Box along with modular base & cover plate

for modular switches in recess etc. as required.

Total of Power Receptacles 2,89,985.36 -

D SITC of Lighting & Fans

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

19 MR-2 Supply, installation, testing & commissioning of 12W Recessed/Surface mounted Round Led Each 94.00 575.64 54,110.10

Downlighter & the luminaire shall be with system efficacy ≥ 95 lm / W. IP20 , Optics: PMMA

LGP/Polysterene Diffuser. The operating CCT shall be 6000K with CRI of ≥80. The luminaire

shall be with BIS Registered electronic driver with input voltage range of 150 to 270V .(As per

attached Annexture 1)

SITC of recess mounted LED luminaire (2X2) min 36W made CRCA housing having powder

coating with high efficiency PET/ Prismatic diffuser for homogeneous light distribution. Fixture

should have minimum efficacy at System level (Not Chip Level) ≥125 lumens/watt and a

minimum system lumen output of >3750 lumens.(As per attached Annexture 1)

SITC of pre-wired minimum 450mm, 10Watt LED Light fitting (Application as Mirror Light)

complete with all accessories, housing made of Extruded Aluminium, System Efficacy ->100

LPW or above and a minimum system lumen output of >1000 lumens with CRI >80, 6500K

ANSI BIN. suitable for 220 V.(As per attached Annexture 1)

22 MR-5 Supply, Installation, Testing & Commissioning of 10W surface mounted Bulkhead light with Each 7.00 791.50 5,540.53

5700K ANSI BIN, made of PDC aluminium housing having powder coating with high

efficiency PC diffuser for homogeneous light distribution. Fixture should have minimum

efficacy at System level (Not Chip Level) ≥85 lumens/watt and a minimum system lumen output

of >850 lumens.(As per attached Annexture 1)

SITC of 225mm dia single phase ,exhaust with necessary angle iron bracket(As per attached

Supplying and Fixing of Exhaust Fan Heavy duty 230V A.C 50 cycles 225 mm 1400 RPM(As

per attached Annexture 1)

Total of Lighting & Fans - 12,50,821.24

E Earthing Protection

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and

25 5.4 providing masonry enclosure with cover plate having locking arrangement and watering pipe of set 10.00 7,472.00 7,730.46 9,044.64 90,446.42

2.7 metre long etc. with charcoal/ coke and salt as required.(For Panel & Lift)

Providing and fixing 25mmx 5mm G.I.Strip on surface or in recess for connection etc as

Total of Earthing Protection 2,14,495.52 -

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Supply of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100

volts grade, cross-sectional area as follows

28 MR-9 3.5 core, 240 Sq.mm.(for MLTP to First Floor panel) Mtr 100.00 2,672.61 2,67,261.15

29 MR-10 3.5 core, 185 Sq.mm.(for MLTP to HVAC Panel) Mtr 160.00 2,490.33 3,98,452.11

30 MR-11 3.5 core, 120 Sq.mm.(for MLTP to Ground Floor panel) Mtr 80.00 - 1,987.33 1,58,986.12

31 MR-12 3.5 core, 35 Sq.mm.(For MLTP to Lift /Utility Panel) Mtr 240.00 1,047.12 2,51,307.72

32 MR-13 4 core, 16 Sq.mm.(Floor Panel to DB) Mtr 340.00 296.04 1,00,654.66

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11

KV grade of following size direct in ground including excavation, sand cushioning, protective

covering and refilling the trench etc as required.

Supplying and making end termination with brass compression gland and aluminium lugs for

following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete

with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching

(75 cm deep) and refilling etc as required.

TOTAL CARRIED TO SUMMERY 4,96,791.97 18,39,674.99

44 MR-14 Main LT Panel

Design, manufacture, supply inspection, installation, handling, assembling, affecting proper

connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical type

Main L.T. Panel, floor mounting, dust & vermin proof, front operated construction, enclosure

class - IP 56, powder coated after proper treatment with 9 tank process with top/bottom

removable gland plates, as required, double compression type cable glands, earth bus, hinged

and lockable doors to achieve dust and vermin proof complete with all inter connections small

wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The Aluminium Bus Bar shall be

of suitable length, 500 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The

panel feeders shall be suitable for terminating suitable up to 3.5 / 4 core 300 sq mm armoured

aluminium cable or Aluminium Bus Duct as required.

Incomer from Transformer

It shall be electrically & Mechanically interlocked with both incoming & Bus coupler's

contactor in such a way that at any one time two supply should not get mixed up.

i. 1 nos 800 AMP FP MCCB of 36 KA with following accessories

ii. Metering for incomers

iii. 1 nos. Under voltage relay with timer.

iv. 0-500 volt range voltmeter with selector switch (P.T. connected)

v. 1 set of 3 CT's of ratio 800/5A, Class 1.0 accuracy 15 VA burden for metering.

1 set of 3 CT's of ratio 800/5A, Class 1.0 accuracy 15 VA burden for APFCR.

1 nos. Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM

6400 of Conzerve or equi.) with RS 485 communication port for communication / report

Power factor meter.

Frequency meter.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Indications for incomers

3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC fuse/MCB.

1 section of 800AMP , 415 Volts, 3 phase 50 HZ TPN high conductivity electrolytic Aluminium

bus bar of suitable length, SMC / DMC supports, with colour coading and insulated by heat

shrinkable sleeves and clip on shrouds for joints.

The current density of bus bar up to 400 Amp shall be minimum 1.00 sq mm / amp.

The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C. The

temperature rise should be restricted to 35 deg C above design ambient temperature of 50 deg C.

All outgoing feeders shall be provided with one set of phase indication lamps and trip indication

lamps with protection fuses/MCB and ammeter with selector switch with suitable ratio CT's of

accuracy class 1.0

1 No. 630 amps 4P MCCB 35kA outgoing feeder .

1 No. 300 amps 4P MCCB 35kA outgoing feeder .

1 No. 250 amps 4P MCCB 35kA outgoing feeder .

1 No. 160 amps 4P MCCB 35kA outgoing feeder .

4 No. 63 amps 4P MCCB 35kA outgoing feeder .

45 MR -15 Ground Floor Panel

1 nos. 250A amps, 4 Pole MCCB with microprocessor based release for complete LSIG

1 protections and suitable for 415V, 50 Hz, A.C Supply and having Ics = Icu= 50 KA. The MCCB

shall be complete as per technical specifications and single line diagram.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

0-500 volts digital electronic volt meter with selector switch and protected by 2 amps TP

0- 160 Amps digital electronic ammeter with selector switch and 3 nos. 630/5 amps, Bar

Primary, 15 VA Burden, CL 1 accuracy CTs . - 1 set

iii 3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 set

iv Breaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set.

Electronic Digital Load Manager with ready RS485 communication port and MODBUS

protocol. - 1 set

200 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade

i. 99.95% purity Tinned Copper (Throughout the length) busbars with colour coded heat shrink

sleeves supported on SMC type grip supports, 50 KA for 1 sec.

5 no. 63 amps Four pole MCCB with thermal magnetic based release for overload and short

circuit protections and suitable for 415V, 50 Hz, A.C supply and having Ics=Icu=36 KA

included with Energy meter with RS 485 port. The MCCB shall be complete as per technical

specifications, single line diagram

2 no. 40 amps Four pole MCCB with thermal magnetic based release for overload and short

circuit protections and suitable for 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA

included with Energy meter with RS 485 port. The MCCB shall be complete as per technical

specifications, single line diagram

1 no. 100 amps Four pole MCCB with thermal magnetic based release for overload and short

circuit protections and suitable for 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA

included with Energy meter with RS 485 port. The MCCB shall be complete as per technical

specifications, single line diagram(1st floor HVAC Panel).

1 no. 25 amps Four pole MCCB with thermal magnetic based release for overload and short

circuit protections and suitable for 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA with

Energy meter with RS 485 port. The MCCB shall be complete as per technical specifications,

single line diagram

46 MR-16 First Floor Panel

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

1 nos. 300 amps, 4 Pole MCCB with microprocessor based release for complete LSIG

i. protections and suitable for 415V, 50 Hz, A.C Supply and having Ics = Icu= 50 KA. The MCCB

shall be complete as per technical specifications and single line diagram.

0-500 volts digital electronic volt meter with selector switch and protected by 2 amps TP

0- 300 Amps digital electronic ammeter with selector switch and 3 nos. 200/5 amps, Bar

Primary, 15 VA Burden, CL 1 accuracy CTs . - 1 set

iv. 3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 set

v. Breaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set.

Electronic Digital Load Manager with ready RS485 communication port and MODBUS

protocol. - 1 set

300 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade

i. 99.95% purity Tinned Copper (Throughout the length) busbars with colour coded heat shrink

sleeves supported on SMC type grip supports, 50 KA for 1 sec.

2 no. 125 amps Four pole MCCB with thermal magnetic based release for overload and short

circuit protections and suitable for 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA

included Energy meter with RS 485 port. The MCCB shall be complete as per technical

specifications, single line diagram

2 no. 100 amps Four pole MCCB with thermal magnetic based release for overload and short

circuit protections and suitable for 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA

included Energy meter with RS 485 port. The MCCB shall be complete as per technical

specifications, single line diagram(For Laboratory 11 ).

10 no. 63 amps Four pole MCCB with thermal magnetic based release for overload and short

circuit protections and suitable for 415V, 50 Hz, A.C supply and having Ics=Icu= 25 KA with

Energy meter with RS 485 port. The MCCB shall be complete as per technical specifications,

single line diagram (For Power DB-CA_2F, DB-Staff room & DB-office area).

MR-16 A UPS Panel

Tech. spec. as described above.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Comprising of the following:

160A, 4P MCCB (16KA).-1 Nos

Metering & Indication:

Combined digital Ammeter/Voltmeter with Selector Switch and 160/5A,

CL-1, 10VA CTs and 2A control MCB.

Sets of phase indicating lamp with 2A control MCBs.

Sets of ON/OFF/Trip indicating lamp with 2A control MCBs.

Electrolytic high conductivity Cu four pole busbars rated at 200

amps(after deration) having a maximum current density of 1.6 amp per sq mm insulated with

heat shrinkable PVC sleeves.

Outgoing feeders:

100A TP MCCB (10-KA).-4

63A TP MCCB (10-KA).-2

One(1) Nos. 63A DP MCB (10-KA). For Spare only.

UPS Panel described as above Set 1.00 2,37,451.25 2,37,451.25

TOTAL CARRIED TO SUMMERY 8,41,872.62

Supply, Installation, Testing and Commissioning of 15 KVA online UPS 3 phase with inbuilt

isolation transformer at 50 Hz, batteries backup of minimum 30 minutes duration including

SMF batteries, controls, protection and instruments etc. complete as required. Cost to include

battery stand/rack, interconnecting cables etc.

TOTAL CARRIED TO SUMMERY 8,08,797.82

I Cable tray & Raceway

Supply and laying Raceways/Conduits Raceways/conduits shall be fixed to the flooring with GI

clamps for finished levels as per the through partitions with all accessories. Raceway and JB

shall be closed properly with plastic bags to avoid enteringof cement mortar.All JB and raceway

to be earthed at each contact point and at DB level with 16 SWG cu wire

100 mm x 38 mm GI/Metal floor raceway , 2 mm thick with cover( For

Elanding,Immigration,&Ticket Counters)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

surface/recess including cutting the wall and making good the same in case of recessed conduit

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

50 MR-19 floor breaking for raceway - size of trench 300 x 50 mm - removal of debris included RM 255.00 359.88 91,768.48

51 MR-20 Supplying and fixing 250mm x 250mm x65-90 mm deep GI finish.The junction boxes shall EACH 18.00 5,736.25 1,03,252.44

have knock-outs on all sides suitable for Raceways/conduits. With stainless steel Plate. The

knock out shall be removed at site as pe rrequirements. Junction boxes shall be leveled at the

time of installation. Juctions boxes shall be earthed with raceway with 18 Swg cu wire. Junction

boxes and raceway shall be covered with plastic bags during back filling of concrete work.( For

Elanding,Immigration,&Ticket Counters)

52 MR-21 Supplying and fixing 150mm x 150mm x65-90 mm deep GI finish.The junction boxes shall EACH 10.00 4,625.26 46,252.63

have knock-outs on all sides suitable for Raceways/conduits. With stainless steel Plate. The

knock out shall be removed at site as pe rrequirements. Junction boxes shall be leveled at the

time of installation. Juctions boxes shall be earthed with raceway with 18 Swg cu wire. Junction

boxes and raceway shall be covered with plastic bags during back filling of concrete work.( For

Elanding,Immigration,&Ticket Counters)

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

(galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

53 300 mm width X 50 mm depth X 1.6 mm thickness(For Panel room) Metre 40.00 963.00 996.31 1,165.68 46,627.36

Supplying and installing following size of painted with

powder coating M.S. cable trays bends with not more

DSR 4.2 than 17 joined With connectors, suspended from the ceiling With

MS. suspenders including bolts & nuts, suspenders etc as

54 300 mm width X 50 mm depth X 1.6 mm thickness(For Panel room) Each 4.00 1,438.00 1,487.74 1,740.66 6,962.63

DSR 4.3 Supplying and installing following size of perforated painted with

coating MS, cable trays Tee with perforation not more than

17.5%. joined with connectors, suspended from the ceiling with M.S.

suspenders including bolts & nuts. painting suspenders etc as

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

55 300 mm width X 50 mm depth X 1.6 mm thickness(For Panel room) Each 3.00 1,708.00 1,767.08 2,067.49 6,202.46

TOTAL CARRIED TO SUMMARY 77,610.58 9,11,727.95

J TELEPHONE SYSTEM

Supply, Installation, Testing & Commissioning of Pure IP at core server Based voice solution

with 04 Port Voicemail ,04 Port FXS ,04 Port FXO , 32 Channel Circuit with CLIP Facility ,196

IP users License ,01 Nos. IP Operator Console, 100 Party Conference ,Speed Dial, Music on

Hold , Internal/ External ring difference ,Call Barring, Call Pickup, TEC should be with GR

Number, - Should Support Redundant server in active-Active mode.

57 MR-23 Supply of UPS 2 KVA online UPS with 2 hours backup time for server network switch as per Nos 1.00 1,06,493.29 1,06,493.29

the technical specifications in the tenderas per the technical specifications in the tender having

minimum power supply backup to EPABX system during/ in case of AC mains failure with Fire

Retardant casing sealed maintenance free batteries of adequate ampere hour capacity with

suitable size M.S. stand duly painted with synthetic enameled paint

Supply, Installation, Testing & Commissioning of Type 1 IP Phone 1 VoIP account , Full duplex

58 MR-24 speaker phone, IPV6, 2xLAN, PoE . Nos 65.00 16,549.63 10,75,726.13

Approved Makes: Tadiran/Arista /Polycom/Toshiba/ Aeonix/Nexxus

DSR Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor,

1.18 unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

surface/recess including cutting the wall and making good the same in case of recessed conduit

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate

for modular switches in recess etc as required.

DSR Supplying and fixing following modular switch/ socket on the existing modular plate &

1.24 switch box including connections but excluding modular plate etc. as required.

DSR Telephone socket outlet

Note: Location LV Room and working area i.e. Elanding,Immigration,&Ticket Counters)

TOTAL CARRIED TO SUMMERY 7,49,874.90 37,36,619.26

K LAN NET-WORKING SYSTEM

DSR.1.2 Supplying and fixing following size/ modules, GI box for modular switches in recess etc. as

Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate, British Style with

Shutter, 2 Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS

Compliant, in accorandce with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002

AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7 white for I/O fixing at user side.

Supply, Installation, Testing & Commissioning of CAT 6 UTP (both tool & toolless)

information outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition,

ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O should have minimu 750 mating

cycle and 200 insertion cycle and UL approved,for Data, Voice, & Wi-Fi at user end.

Supply, Installation, Testing & Commissioning of 42 U (600W/1000D) floor mount rack with

fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts.

Supply, Installation, Testing & Commissioning of 15 U (600W/1000D) Wall mount rack with

68 MR-28 fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Nos 1.00 24,670.26 24,670.26

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

DSR- Supplying and drawing of UTP 4 pair CAT 6 LAN Cable as per EIA in the existing surface/

1.53 recessed Steel/PVC Conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit

along with accessories in surface/recess including cutting the wall -

and making good the same in case of recessed conduit as required,

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch Cord as per

71 MR - 29 ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side switch Nos. 191.00 849.60 1,62,273.60

to jack panel connectivity.

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch Cord as per

ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for User side

Supply, Installation, Testing & Commissioning of loaded 24 port CAT 6 UTP, Transparent

73 MR - 31 shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and Nos. 10.00 25,355.84 2,53,558.40

earthing plug for CAT6A cable termination at rack end.

Supply, Installation, Testing & Commissioning of 24 Port POE+ Access Switches with

74 MR - 32 switching capaticy of 128 Gbps, forwarding performance 95 Mpps, having 24 x Nos. 10.00 5,13,964.34 51,39,643.40

10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W, with 4 x 10G SFP+

uplink ports. Should Non Blocking architecture , 16K MAC address. Should have Static Routing

,RIP,VRRP, OSPF from day 1,Should support ISSU from day 1 ,Should support stacking with

min 14 members in a stack, Neighbor discovery, system logging, Telnet, SSH, SNMP, Network

Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr

Supply, Installation, Testing & Commissioning of 24 X100/1000 SFP Switches with 6X 10

GBPS SFP+ Ports , switching capaticy of 216 Gbps, forwarding performance 138 Mpps, having

75 MR - 33 24 x 100/1000 SFP Port with 6 x 10G SFP+ uplink ports. Should Non Blocking architecture , Nos. 1.00 7,88,078.34 7,88,078.34

32K MAC address. Should have Static Routing ,RIP,VRRP, OSPF & BGP from day 1,Should

support ISSU from day 1 ,Should support stacking with min 14 members in a stack, Neighbor

discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP),IPv6 features

from day 1 , MTBF Min 198000 Hr, Switch should have inbuilt 8x 1G Copper port (indenegeous

port/ No Module), RPS .

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Supply, Installation, Testing & Commissioning of fiber Modules 1000BASE

77 MR - 35 Supply, Installation, Testing & Commissioning of 4x4 Access Point Ceilling Mount having 1 x Nos 6.00 1,11,701.16 6,70,206.96

2.5GE (PoE/PoE+) port , 1 x G Copper port .For 2.4G 2*2 MIMO, For 5G 4*4 MIMO.Built-in

omnidirectional internal antennas, Dual frequency with min 6 Stream .For 2.4G: 3dBi and for

5G: 3dBi.Maximum number of users per band should be minimum 128. power

consumption:18W.Encryption: AES, WPA3\802.11i: Supported, Authentication: MAC

Address/PSK, Client isolation: Both Layer-2 wireless client isolation and SSID

isolation,Forwarding security: Packet filter, MAC address filter, and broadcast storm

suppression,SSID-VLAN binding: Supported,Management frame protection (802.11w):

Supported.Should be CE, FCC, CCC, ROHS certified

78 MR - 36 Supply, Installation, Testing & Commissioning of armoured 6 core Singlemode OS2 (9/125 Mtr 50.00 269.04 13,452.00

Micro), Corrugated ECCS Armor, HDPE (UV) Sheathing, Theoxtropic gel filled OFC cable

with 2 Nos steel music wire embedded in side sheathing as stregth member for switch

connectivity. Cable should be ROHS compliant and as per IEC60749-1 with product warranty of

79 MR - 37 Supply, Installation, Testing & Commissioning of 24F SM loaded LIU with LC adaptor plates, Nos 1.00 44,543.82 44,543.82

pigtel cables, Spilce tray, cable holder and 4 nos of cable entry exist point with rubber gurment

along with the LIU, Powder Coaded 1.2mm steel sheet metal, 1U etc complete as required. LIU

should be in accordance with YD/T 778-2006 Optical Distribution Frame & YD/T 1272.1-2003

Optical Fiber Connector Part 1: Type LC and should have 30 years of product warranty.

Supply, Installation, Testing & Commissioning of 6F SM loaded LIU with LC adaptor plates,

pigtel cables, Spilce tray, cable holder and 4 nos of cable entry exist point with rubber gurment

80 MR - 38 along with the LIU, Powder Coaded 1.2mm steel sheet metal, 1U etc complete as required. LIU Nos 1.00 25,355.84 25,355.84

should be in accordance with YD/T 778-2006 Optical Distribution Frame & YD/T 1272.1-2003

Optical Fiber Connector Part 1: Type LC and should have 30 years of product warranty.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Supply, Installation, Testing & Commissioning of LC-LC singlemode OS2 (9/125) duplex,

LSZH fiber patch cord for LIU to switch connectivity. Patch Cord should have aramid yarn as

strenght member with 1000 time mating cycle.

Total for LAN Networking 13,62,274.14 77,72,672.98

L CCTV (IP VIDEO SURVEILLANCE) SYSTEM

CCTV (IP VIDEO SURVEILLANCE) SYSTEM Complete set and accessories as per required

system & technical Specifications.

"Supply, installation, testing and commissioning of 4MP HD Bullet camera , ONVIF profile S

82 MR -40 ,G & T . UL , CE , FCC Certified ,1/2.7” Progressive Scan CMOS or ,2.7 mm to 13.5 mm No. 10.00 58,283.49 5,82,834.89

motorized varifocal lens ,Quad stream with each stream support H.265 compression

simultaneously ,min illumination feature @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s or

better, WDR , Compression : H.265/H.265+/H.264/H.264+/MJPEG . Alarm trigger, frame rate:

25 FPS or better ,Built in analytics - Video Motion Detection, Advance Motion Detection,

Digital Auto Tracking, Fence protection, Loitering, Tampering, Support Edge based 3rd party

analytics, Support for recording to NAS ,Memory 512 MB RAM, 256 MB Flash,IK08, IP66,

PVC Free, Humidity:10–100% RH (condensing),UL,FCC,EN,NDAA compliant, IR Distance

upto 45 meters , IP 66 , POE.

Supply, installation, testing and commissioning of 4MP HD dome camera , ONVIF profile S ,G Nos. 44.00 56,844.39 25,01,153.19

& T . UL , CE , FCC Certified ,1/2.7” Progressive Scan CMOS or ,2.7 mm to 13.5 mm

motorized varifocal lens ,Quad stream with each stream support H.265 compression

simultaneously ,min illumination feature @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s or

better, WDR , Compression : H.265/H.265+/H.264/H.264+/MJPEG . Alarm trigger, frame rate:

25 FPS or better ,Built in analytics - Video Motion Detection, Advance Motion Detection,

Digital Auto Tracking, Fence protection, Loitering, Tampering, Support Edge based 3rd party

analytics, Support for recording to NAS ,Memory 512 MB RAM, 256 MB Flash,IK08, IP66,

PVC Free, Humidity:10–100% RH (condensing),UL,FCC,EN,NDAA compliant, IR Distance

upto 45 meters , IP 66 , POE.

Supply , installation , testing and commissioning of PTZ Bullet camera in metal body with

continues 360° pan for both indoor and outdoor with 30x Minimum & 12x Digital Zoom or

better,Lens 4.3-129 mm or better, Image Resolution 1920 x 1080 or better in H.264 and Motion

JPEG, Day & Night, IP66 and Edge Storage Built in SD card slot with support upto 64 GB with

Class 10 speed Autotracking , Mounting brackets are included.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Supply, installation, testing and commissioning of 32 channel NVR , ONVIF compliant ,

85 MR -43 recording bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out Nos. 3.00 6,67,741.70 20,03,225.11

:16ch in / 4ch out , 1 X RJ45 ethernet , iOS smartphone support , 8 HDD support , each HDD

slot support upto 8 TB HDD , 1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse .Edge

analytics of poposed cameras must be integrated with NVR . Artificial Intelligence Support

having face recognition with compatible deep learning supported cameras, AI-Face registered

quantity upto 10,000 ,A.I maximum captured quantity 200,000. UL,CE,FCC certified.

Supply, installation, testing and commissioning of user Client control software (web based) with

86 MR -44 system complete as per spec with valid licenses. The software should enable the user to view Set 1.00 5,23,831.85 5,23,831.85

multiple cameras in any combination available on the network .

Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display

Supply, Installation, Testing & Commissioning of 8TB Surviellance Hard Disk. (90 Days

Supply, Installation, Testing & Commissioning of NAS with 6 Bay (each bay upto 16TB)

89 MR -47 Desktop Diskless NAS, Intel® Atom C3538 Quad Core Processor 2.1 GHz, 4GB DDR4 RAM, Nos. 1.00 2,74,064.80 2,74,064.80

2xUSB3.0, 1xUSB2.0, 4x1G Ethernet Port

Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770

90 MR -48 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Nos. 1.00 1,22,959.45 1,22,959.45

Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data

Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1

Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5" SATA 6Gb/s Hard Drive;

Operating system: Windows 7 Professional 64 Bit or latest.

DSR- Supplying and drawing of UTP 4 pair CAT 6 LAN Cable as per EIA in the existing surface/

1.53 recessed Steel/PVC Conduit as required.

Supplying and fixing of followmg smes ot medium class PVC conduit

along With accessories in surface/recess including cutting the wall

and making good the same in case of recessed conduit as required.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Supply, Installation, Testing & Commissioning of 24 Port POE+ Access Switches with

93 MR-49 switching capaticy of 128 Gbps, forwarding performance 95 Mpps, having 24 x Nos 4.00 5,13,964.34 20,55,857.36

10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W, with 4 x 10G SFP+

uplink ports. Should Non Blocking architecture , 16K MAC address. Should have Static Routing

,RIP,VRRP, OSPF from day 1,Should support ISSU from day 1 ,Should support stacking with

min 14 members in a stack, Neighbor discovery, system logging, Telnet, SSH, SNMP, Network

Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr

Supply, Installation, Testing & Commissioning of 15 U (600W/1000D) Wall mount rack with

94 MR-50 fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Nos 1.00 24,670.26 24,670.26

96 MR-52 Terminal Jack for cctv Nos 500.00 73.16 36,580.00

Pls refer Drawing No PT-CT-FA-PL-01 & PT-CT-FA-PL-02

TOTAL CARRIED TO SUMMERY 9,55,182.94 91,44,935.51

P PUBLIC ADDRESS SYSTEM

Supply, installation, testing & commissioning of 2 C 1.5 sq.mm FRLS PVC insulated copper

armourd cable on surface including accessories as required

DSR- Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

17.3.2 required.

DSR- Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers

17.3.3 complete as required.

100 MR -54 Supply, installation, testing and commissioning of rack mounted dual Channel Digital Power Nos 2.00 19,427.83 38,855.66

Amplifier capable of delivering 300 W RMS power output or 480 W RMS burst output;

complete with 100 V Line Matching Transformer, built-in fan for temperature control,

Distortion typically 0.03% @ 1 KHz, Hum and Noise 90 dB below rated output selection

facility,provision for hookup with Fire Alarm Panel, complete with connections and required

Supply, Installation, Testing & Commissioning of IP based Networkable touch screen paging

101 MR -55 station for selection of zones, supervision of system status, setting of scheduled broadcasts with Nos 2.00 84,604.60 1,69,209.20

the following functions:

. Built-in monitoring loudspeaker

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

. Built-in monitoring loudspeaker

. Detachable goose-neck microphone

. LCD touchscreen display

102 MR -56 Supply, installation, testing and commissioning of Portable 60W Mixer amplifer for a Nos 1.00 46,770.70 46,770.70

professional public address unit with state‑of‑the‑art features, which is built on class-D

platform. with following Functions :

Cordless Microphone with receiver (Hand Held) UHF (Freq. response: 50Hz to 20kHz. Controls

: On /standby /off)

Pls Note: Location GF & FF

TOTAL CARRIED TO SUMMARY 72,263.93 4,47,970.97

Q Secruity System

Supply, installation, testing & commissioning of X-ray baggage scanner, Type Approved by

AERB, with tunnel opening dimensions of 1000mm x 1000mm, conveyor speed between

0.18mtrs and 0.25mtrs. per second, conveyor capacity 200 Kg. Baggage scanner should include

input and output roller of min 500 mm, monitor for viewing scanned images. Steel penetration

minimum 30mm. Operating System: Linux. Certificates : CE, FCC, FDA, CMMI Level 5

certification. ROHS certificate to be provided. BARC/BRIT film and foof safety certificate to be

provided. OEM should have commercial production license from AERB for X ray baggage

scanners for more than 7 years. Operating temperature -5 deg to +55 degree, storage temperature

-20 degree to +60 degree (test report to be provided). OEM of the offered product should have

ISO 9001, ISO 45001, ISO 27001 , ISO 14001 certification. Video display - 20" or better LCD

Monitor High resolution, low radiation, flicker free, resolution at least 1280x1024, 24 bit true

color real time processing Health & Safety - The machine must comply with requirements of

health and safety regulations with regards to mechanical, Electrical and radiation hazards. Film

Safety: Guaranteed safety for high speed films upto ISO 1600. The machines should be film

safe. In other words photographic films must not be damaged due to x-ray examination The

operating System should be Linux based Organic/ inorganic stripping, High penetration, Edge

enhancement,Zoom 32 X or more, Facility to view previous bag, Manual image

archive,Configurable image processing keys, Facility to count baggage, Date /time display, Have

search indicator, Machine should be capable of recalling 15 or more previous images Have

facility of high density alert (HDA) Manual Scan facility, Automatic image archiving Threat

image projection (TIP) Additional accessories :Conveyor Accessories (Input/ Output rollers )-

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

image projection (TIP) Additional accessories :Conveyor Accessories (Input/ Output rollers )-

0.5 mtr Length .With 3 KVA UPS System .As per Technical specifications.

Supply , Installation , Testing and Commissioning of HAND HELD METAL DETECTOR Pulse

105 MR -59 induction technology, transmitter / receiver with automatic instant retune and should be Nos. 5.00 31,580.34 1,57,901.70

compliant to NIJ-0602.02 . Indoor and outdoor use, very long battery life, no battery

replacement necessary, fully programmable through USB interface, fully programmable optical

alarm signaling (continuous or proportional), fully programmable acoustical alarm signaling

(continuous or proportional), alarm vibration.

Supply, installation, testing and commissioning of Multi- zone pinpoint Metal detector,

Audio/Visual Indicator with Automatic counting, Traffic flow indicator, High performance

Total For secruity system - 2,61,30,203.20

TOTAL COST OF Electrical 81,80,854.43 5,29,50,893.54

SCHEDULE OF QUANTITIES- LIFT

DSR- Description of Item DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate NDSR Rate

Design, manufacture, supply, installation, testing, commissioning, approvals and handing over

in satisfactory working condition of lifts including the cost of providing free comprehensive

maintenance for two years after handing over complete as per specifications and as required and

Supplying, installation, testing & commissioning of 13 Passenger , Machine Room Less, having

speed of 1 MPS in the existing lift shaft as per detailed specifications enclosed and as follows:

(i) Speed: 1 MPS

(ii) Floors: G + 1 + 2 + Terrace

(iii) Travel: 9 mtrs (approx.)

(iv) Stops & opening: 3/3

(v) Controller: A.C. variable voltage & variable frequency

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Automatic rescue device complete with dry maintenance free batteries i/c voice announcement

system as two languages etc. complete as required.

(vi) Operation : Microprocessor based Duplex selective collective control with without attendant

(vii) Power - 415 V, 3 phase, 50 Hz, 4 wires system

(viii) Type of doors

(a) Car Doors: (W 1000 mm x H 2100 mm) Automatic power operated Centre opening, H SS

hairline finish

(b) Landing Doors: (W-1000 mm X H-2100 mm) Automatic Power operated, center opening

horizontal sliding Glazed door with stainless steel scratch proof finish frame will have fire

resistance rating of two hour.

(ix) Car body will be of scratch proof SS finish.

(x) LED downlight fitting inside car capable of providing more than 150 Lux.

(xi) Full height Infra Red protection is to be provided for landing/ car doors.

(xii) Provision of Toe guards, Fireman's switch etc.

A Stainless steel hand rail not less than 600 mm long at 900 mm above floor level to be fixed on

the 3 sides of lift car.

Button in car operating panel & landing operating panel shall be having Braille Inscription &

shall be fixed for the handicaped.

Voice announcement system in the car to announce the position of the elevator in the hoistway

as the car passes or stops at a floor served by the elevator.

Lift installation shall include all safety & control features as specified in the specifications.

The features required for use of the lift by handicapped persons eg hand rail, braile signage

closing speed of doors etc 4 Nos.

MR - 61 13 Passenger min. Capacity, Travel Geight G+1+Terrace Nos 2 21,92,912.00 - 43,85,824.00

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Supply, installation , testing and commissioning of 2000 Kg goods lift with elevators for

2 MR-62 operation on 415 V, 3 Phase, 50 Hz AC supply,having AC variable voltage and variable

frequency type traction control, electro magnetic brake system,simple operation, operating panel

with luminous buttons, over load warning indicator, battery operated alarm bell, LED type

emergency light, intercom suitable for hook upto Society EPBAX, infrared rays sensing door

protection for suitable height, reverse phase relay on controller, fireman's switch at ground phase

relay on controller, phase relay on controller, fireman's switch at ground floor, digital car

position indicator in car and at all positions indicator in car at all floors with UP/DOWN

directions, light fixtures, ventilation fan etc. complete with all accessories including automatic

rescue device and having following other features. Including all steel, civil and electrical work

required for installation of elevator in the exisiting lift well and machine room, scaffolding,

cutting holes, grouting and making good to damages in wall , floor, ceiling etc. for fixing

accessories foundation bolts etc., hoistway wiring and other associated wirings including

fierman's switch complete in all respect and also Conveyance, loading, unloading, royalties

,taxes all material and cost all labours sundries,T&P required as per the direction of the

Engineer-in-charge.

MACHINE LOCATION : IN LIFT MACHINE ROOM

CAR SIZE : MOST SUITABLE TO THE AVAILABLE PIT SIZE. AND SHOULD NOT BE

LESS THAN IS SPECIFIED DIMENTION FOR PARTICULAR CATEGORY PASSENGER

CAR ENCLOSURE/PANEL : HAIRLINE FINISH,

STAINLESS STEEL

CAR INTERIOR : STAINLESS STEEL PANNELS WITH HAIL LINE FINISH ON ALL SIDE.

CAR FLOOR : SINGLE PIECE OF MARBLE FOR EACH.

FLOORING : 25 MM RECESS IN PLATFORM

HOISTWAY/CAR DOORS : AUTOMATIC CENTRE

OPENING STAINLESS STEEL DOORS IN HAIR

COP BUTTON TYPE : MICRO ACTION ILLUMINATED HALL BUTTONS WITH

DIRECTION ARROWS

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

HALL BUTTONS COMBINED WITH HALL

POSITION INDICATORS AT ALL FLOORS : MICRO ACTION BUTTONS ROUND RING

ILLUMINATED WITH DIRECTION ARROWS AND DIGITAL INDICATORS.

Shaft Size Variation - +/- 75 mm

Description of Lifts

ALL FIXTURES & FACEPLATE : IN STAINLESS STEEL HAIRLINE FINISH WITH

AVAILABLE PIT SIZE.

For the below mentioned stops, speed and passanger details

Speed-1.75 m/sec

shaft size-2100x3000 mm

Door size-900 each

2000 Kg goods lift with elevators Nos 1 43,85,824.00 - 43,85,824.00

3 MR-63 Design, supply , installation, testing and commissioning of reversible escalators

3.1 The Escalator shall be of State-of-the-art technology, having nominal step width of 1000 mm,

with 3 nos. horizontal Steps on top and bottom landing area and the nominal speed will be 0.5

m/sec. For the aforesaid step width and nominal speed, maximum carrying capacity as per

EN115-1:2008 will be 100 passengers per minute. The escalator shall be complete with all

safety features and shall fully comply with International Standard EN-115 latest version.

3.2 The Escalators shall be reversible type and capable of operating safely, smoothly and

continuously in both directions for a period of not less than 20 hours a day, seven (7) days a

week with an alternating passenger load reaching 100% of Contract Load (120 kg per step) for

two hours and 50% of Contract Load for the following hour within the environmental conditions

as stated in the specification and at the location where the escalators are to be installed

The angle of inclination of escalator shall be 35° and minimum transition radius shall be 2.6

meters at the upper landing and 2.0 meters at the lower landing.

PROJECT :- Renovation/refurbishment/ improvements to the existing cruise terminal at port premises for Chennai Port Campus, Chennai.

DSR- Description of Item with DSR Amount NDSR Amount

Sl. No. Unit Total Qty DSR Rate including NDSR Rate

2023/M Correction (In Rs.) (In Rs.)

Revesible Escaltor Nos 1 61,67,565.00 - 61,67,565.00

Dismantling & Removing of the existing Cargo lift of all types travelling G+2 floors (3

MR-64 Landings/3Stops) having with auto/manual operated doors for lift car & all landings with door LS. 1 4,13,000.00 4,13,000.00

frames, guide rails, controller, wiring buffers, Lift Machine, ropes complete with all allied

accessories of Lift and making the site clear in all respect complete with refilling the holes with

cement mortar & making the site as original this job includes transportation of the dismantled

material up to division/section store and handing over to the section engineer/store keeper in

charge complete.

Total of Lift,Goods Lift & Escalators n 1,53,52,213.00