REPAIR REPLACEMENT CLEANING TO SEWAGE LINES MANHOLES SEPTIC TANKS SOAKAGE PIT FENCING PATH DRAINS AND OTHER MISC WORKS IN ZONE B C AND F OF AGE BR I UNDER GE MIS MHOW

Amount

Excavation in trenches n.exceeding 1.50m wide and n.exc 1.50m depth for foundation etc or for shafts, walls, cess-pits, manholes, pier holes etc n.exc. 10 sqm on plan and n.exc. 1.5m in depth, getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified & directed.

Returning, filling in including spreading, levelling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

M&L for Salt glazed stoneware drain pipe Grade 'A' 150 mm bore laid in trenches and jointed including taking down existing pipe complete all as specified and directed.

All as per item No 4.00 above but 200 mm bore pipe.

All as per item No 4.00 above but 100 mm bore pipe.

S&F in repairs 200mm reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for 200mm bore/inner dia Double wall corrugated (DWC) pipe (SN-4) with intergral socket and all necessary fttings of same grade, laid in trenches jointed confirming to IS 16098 (Part 2) including taking out old SGSW pipes complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in bed drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including taking down existing concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in bed drain pipes of 200 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including taking down existing concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in bed drain pipes of 100 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including taking down existing concrete complete all as specified and directed.

M&L for cleaning of sewage line, SWG/CI pipe or RCC pipe vertically/horizontally of dia 100 mm bore by rodding well flushing by using sufficient water and making it to clear for easy flow of sewage from WC gully trap Nahani trap including desludging of and making it the proper functional to entrie satisafaction of Engineer-in-Charge and removing the sludge out side MD land and burying it in pits and covering with earth and spreading hydrated time @ 1 Kg per Sqm of covered area complete all as specifed and directed at site complete all as specified and directed at site complete to entrie satisfaction of Engr-in-Charge.

M&L for cleaning of sewage line, SWG/CI pipe or RCC pipe vertically/horizontally of dia 150 mm bore by rodding well flushing by using sufficient water and making it to clear for easy flow of sewage from WC, gully trap, Nahani trap including desludging of and making it the proper functional to entire satisfaction of Engineer-in-Charge and removing the sludge, silt etc to a distance n.exc 500m and burying it in pits and covering with earth and spreading hydrated lime @ 1 Kg per Sqm of covered area complete all as specified and directed at site complete to entire satisfaction of Engr-in-Charge.

All as per item No 12.00 above but for 200mm bore.

M&L for cleaning of septic tank by desludging, distilling and getting out all silts and sludge, organic and inorganic materials by using pumping devices or mechanical means and removing the sludge and burying it into the pits and covered with earth including spreading hydrated lime 1 Kg per pit complete all as directed at site.After complete cleaning of septic tank the manhole cover will be refixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete to entire satisfaction of Engineer-in-Charge. Note: The unit rate quoted by the contractor shall be deemed to include the operation of mobile sewage pumps. No extra payment shall be admissible on this account.

M&L for cleaning/desludging of existing septic tank, of any capacity and depth with inlet/outlet chambers including taking out sludge (both organic and inorganic matter) in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc by means of sewage sucking machine or mechanical means and after plugging the incoming sewer line through combined high pressure water jetting/ suction (Vacuum) type machine mounted on LCV/HCV facility of high pressure vacuum and removing the sludge outside MD land by any means at a place meant for the purpose by local munucipality complete all as specified and directed at site. Note: The unit rate quoted by the contractor shall be deemed to include the operation of mobile sewage pumps. No extra payment shall be admissible on this account.

Cleaning/clearing of manhole of any description any size and depth and removing sludge and accumulated solids/semi solids by means of sewage cleaning jet machine / compressors/Drain jetters Pumps and washing down with water for smooth functioning of sewage line and man hole as specified and waste obtained shall be removed to a distance exceeding 200 m and not exceeding 250m and buried in ground including necessary excavation earth work and spreading of bleaching powder all as directed by Engineer-in-charge.

Cleaning / removal of blockage from EWC/IWC/Gully traps/floor trap/wash hand basin etc choked with mud and other accumulated solids, semi solids etc with proper cleaning rubber bush/other instruments and cleaning with water for proper functioning of same complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning/clearing of sewer line (including inbetween manholes) 200 mm bore sewer line of any type and any location, depth of manhole n.exc 3.0m in depth, section, line between the sewer lines to septic tank/soak well/sump well and cleaning any type of blockage including desilting, descaling and dechocking of drain and manhole with combined high pressure water jetting cum suction vacuum type machine mouinted on LCV/HCV and having facility of high pressure vacuum and provn of hydraulic application through high pressure thermo plastic fibre based water jetting hose and conical round shape nozzle pipe and flushing after cleaning and removing the sludge outside MD land by any means at a place meant for the purpose by local munucipality complete all as specified and directed at site. Note for item No. 12 to 19"- (i) Necessary precautions as well as safety measures shall be taken by the contractor without any extra cost for working in the foul condition. (ii) The contractor shall be enterily responsible for the lapse, mishappenig to any of the manpower deployed and /or to other equipment/machinery/material at the site. (iii) No extra payment shall be admissible on this account.

M&L for brickwork with using fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) including demolition of old brick work built in cement mortar in any position including all quoins, arches & pillars etc. complete all as directed and specified.

All as per item No 20.00 above but except brick

Extra for forming fair finished drain or channel, 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on any faces of brick or concrete surfaces finish the surface even and smooth without using extra cement complete all as specified and directed.

M&L for pre-cast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs,manhole cover and similar work including demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

S&F in repairs 75mm dia Cast iron sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls all as spd.

S&F in repairs 100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls all as spd.

S&F in repairs PVC (SWR) pipe, 75 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repairs PVC (SWR) pipe, 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and directed.

S&F in repairs PVC (SWR) pipe, 110 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm bore, with access door complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal with access door 75mm bore pipes complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal with access door 90mm bore pipes complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal with access door 110mm bore pipes complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl, 75mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement

S&F in repairs 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement and taking down old trap and necessary concrete work complete all as specified and directed.

S&F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white colour with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (semi-pedestal pattern) (Anglo-Indian type), white colour (excluding fixing bolts, flushing cistern & flush pipe) including plastic water closet seat, white colour, closed pattern with flat bottom and mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe , pull or push type including brackets complete all as specified and directed.

S&F in repairs plastic water closet seat cover, white colour, closed pattern with flat bottom and mild steel CP or aluminised hinging device complete all as specified and directed.

M&L for Non Skid coloured Ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors over and including 15mm thick screed in CM 1:6 , set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles including demolition of old floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed in CM(1:6) including demolition of old floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface as in skirting/dado 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM including demolition of old floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300mm x 200mm size 6-7mm thick in dados or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles including demolition of old floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for chequered cement concrete tiles (glossy finish) 40 cm x 40 cm x 25 mm thick set ,jointed and pointed in neat cement slurry in floors with grey cement and no pigment laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) and necessary PCC coping ,type C1 1:3:6 complete all as specified and directed.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and pigment and necessary PCC coping ,type C1 1:3:6 including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 mm thick complete all as specified and directed.

M&L for 20 to 25 mm thick kota stone, machin cut kota stone slab flooring(mirror polished) over and including 15mm cement screed base laid in CM 1:6 , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete 75mm thick type D-2, (1:4:8) using 40mm graded stone aggregate as in subbase etc. complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-2 (40mm graded stone aggregate) in surface channels and drains,coping incl finshing of exposed surfaces even & smooth with using extra cement complete all as specified and directed.

M&L for cement concrete 75mm thick type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for provide complete water proofing treatment to sunken floor surfaces of RCC slab by the following specifications including taking down and cleaning of old surface as specified and directed :- (a) Provide PCC (1:1.5:3) type A0 with using 12.5mm graded stone aggregate in slope of average thickness 50mm mixed with and including liquid water proofing compound PIDIPROOF LW manufactured by Dr FIXIT or equivalent as approved by GE. (b) M&L rendering 15mm thick in CM 1:3 mixed with & including water proofing compound on sides of (Vertical surface) sunken floor slab. (c) Applying two coats of balck bituminous paint on complete surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc. (d) Spray of sand on bituminious surfaces. Note: WPT Shall be done approved applicator & supply only liglid WPC shall be measured & paid seperately.

M&L PCC 1:2:4 type B 0) using 12.5 mm graded stone aggregate mixing with WPC as in levelling course and in sunken portions etc complete all as specified and directed.

M&L Plain cement concrete 1:5:10 mix, type E-2 (using 40mm graded stone aggregate) as in filling of sunken portion complete all as specified and directed.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved complete all as specified and directed.

S&F in repairs Galvanised steel tubes 40mm dia medium grade for spout pipe etc including welding, greasing etc complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes, etc including writing date of cleaning and applying a coat of bleaching powder complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc including writing date of cleaning and applying a coat of bleaching powder complete all as specified and directed.

S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

Excavating in post holes (or similar holes) for soft/loose soil each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

S&F mild steel work as in angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) and similar works conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins, etc under 40 sq c.m in section complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Fixing only mild steel galvanized chain link fencing, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire. Note :- Chain link fencing shall be measured and paid for separately as supply only.

Supply only mild steel galvanized chain link fencing, any size or type as directed complete all as specified. Note :- Flat iron, round tie bars, nut bolts and washer shall be measured and paid separately.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and not exc 10cm long and dia of neck 11 to 15 mm complete all as specified.

S&F 10mm dia mild steel round bars as in tie bars fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified and directed.

M&L for cleaning of jungle including uprooting of rank vegetation grass , brush wood , small trees , shrubs upto girth and removal of rubbish upto a distance of 500 m outside of area cleared. Note : Machinery required for cleaning shall be including in this item. The unit rate quoted by the contractor shall be deemed to included Machinery required for cleaning. No extra payment shall be admissible on this account.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated (profile pattern) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall/view cutter, fixed with self tapping screws as specified including dismantling Plain or corrugated asbestos sheeting, any guage, thickness, including nainital or similar pattern roof coverings complete all as specified and directed.

M&L preparing of old plastered or unplastered surfaces of walls, cornices etc and applying one coat of cement base paint on old decorated surfaces of wall complete all as specified and directed.

AMIT AGARWAL (BID ID -3499225)

sunway associates (BID ID -3507054)

Sameer Auto Engineers (BID ID -3494666)

M/S Parikshit Sharma (BID ID -3507086)

M/S Sunshine Construction (BID ID -3506882)

B&R Contruction & Services (BID ID -3500485)