Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹11.8 L+₹65,035.76 (5.81%)Rejected-Finance | L2 | Rejected-Finance Higher |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
1 Oct 2020, 6:00 pmClosed
GE Gurdaspur
Garrison Engineer, Gurdaspur (Tibri)
Certain repairs to joinery, plastering, flooring, plumbing and sanitary fitting, misc repairs in Santan Singh Enclave at Tibri Mil Stn, GE Gurdaspur (Tibri)
2020_MES_374696_1
GE GSR-14/2020-21
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer, Gurdaspur (Tibri)
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹30,000
26 Oct 2020
4 Sept 2020
3 Oct 2020
4 Sept 2020
1 Oct 2020
19 Sept 2020
Amount
Taking down shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening after rectify the defect complete all as specified and directed.
Taking down chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.
S&F Factory made solid PVC door frame size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing shown in section 8 of SSR Part-II complete all as specified and directed.
S&F in repair stainless steel/ wire incl taking down existing cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.
Hacking out old broken glass panes of any thickness description from wooden frame or aluminium frame or steel frame or brick surrounds, glazed with putty or fixed with beads, aluminium clip and prepared to receive new glass panes complete all as specified and directed.
S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed nails including hacking at old glass complete all as specified and directed
Taking down old existing prelaminated particle board and M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed in repairs with screws, built in cup board/partitions and kitchen CB shutter etc complete all as specified and directed
External teak wood lipping, 6mm thick to 19/20 mm thick block board or veneered partical board fixed with nails including french polish etc complete all as specified and directed.
MS peg set of six powder coated fixed in repairs complete all as specified and directed.
S&F 40 mm dia, cup board knobs fixed with nut, screw and washer of mild steel , bright finish complete all as specified and directed.
S&F in repair 300mm mild steel ordinary rat tail rod pattern spring including roller plate and fixing with necessary welding complete all as specified and directed.
S&F in repair crystal coner shlef 3 pieces size 7" , 9", 11" assembly set with aluminum alloy bracket and guard rail complete all as specified and directed.
Petty repair to existing in built wooden cup board, locks, hinges inclduing necessary welding and making the lock/ wooden cup boards complete serviceable all as per existing pattern as directed by Engineer-in-Charge including provision of duplicate keys as required.
Petty repair to existing steel door by welding hinges or removing the steel door shutters from the frame and refixing after making serviceable including painting on repair surface complete all as specified and directed.
S&F Aluminium alloy handles, 125mm size fabricated complete all as specified and directed
S&F in repair Aluminium alloy handles, 125mm size fabricated complete all as specified and directed
S&F in SS built hinges 100mm size medium wieght cold rolled mild steel complete all as specified and directed.
S&F in repair SS built hinges 100mm size medium wieght cold rolled mild steel complete all as specified and directed.
S&F in repair 300mm long aluminum alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sec and fixing bolts and sliding bolts of cst aluminum alloy and fixed complete all as specified and directed.
S&F 150mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed
S&F in repairs 150mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F in repair 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring complete all as specified and directed.
S&F in repairs CP grating 100mm to 140mm dia complete all as specified and directed.
S&F in repair MS pipe 20/25 mm bore, powder coated chromium plated with fixing brackets stops rollers including fancy type knops two Nos to each curtain rod complete all as specified and directed.
S&F in repair sink with drainage board made of stainless steel 1mm plugs, washers and waste pipe including fixing cantilever brackets and connecting union to pipe over all size size 915mmx460mm with bowl size 410mm x 330 mm x 160mm complete all as specified and directed.
S&F in repair stainless steel plate rack size 75cm x 75cm and fixed to wall complete all as specified and directed.
Dismantling of water tanks and removing to store of capacity exc 250 ltrs but n. exc 500 ltrs complete all as specified and directed.
S&F rotational moulded polythene triple layers 500 Ltrs storage tanks cylindrical,vertical with closed top hoisted and fixed in position complete all as specified and directed.
PVC cover with fitting of PVC water tganks of capacity exc 250 ltrs but not exc 1000 ltr fixed in repairs complete all as specified and directed.
Cleaning and removing all scale and dirt etc from over head water tanks and mouth of circulating pipe etc of capacity exc 250 ltr but not exceeding 1000 ltr using bleaching and refixing in the same position.
S&F in repairs kitchen sink couping 75 mm to 100mm dia, including PVC waste pipe complete all as specified and directed.
S&F in repairs Sink waste pipe fixed complete all as specified & directed
S& F in repair CP waste coupling 32/40mm dia for WHB complete all as specified & directed
S & F in repair brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed
S&F in repair new brass spindle with nylon washer and removing leakage of water of any bib tap/stop valve suitable for 15 to 25mm bore pipe complete all as specified.
S&F in repair new brass spindle with nylon washer and removing leakage of water of any wall mixture suitable length for 15 to 25mm bore pipe complete all as specified.
Taking up or down 15mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.
Refixing 15mm dia steel tubing and connection in new or old position (in wall ceiling floors etc)all as specified and directed.
S&F 15mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.
Taking up or down 25mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.
Refixing 25 mm dia steel tubing and connection in new or old position (in wall ceiling floors etc) all as specified and directed.
S&F 25mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.
S&F in repair bib taps 15mm dia chromium plated fancy type long body with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed.
S&F in repairs angel stop valve 15mm dia cast copper along chromium plated with capastan head screwed both ends for iron pipe or for union all as specified and directed.
S&F in repair 20 mm ball brass valve high pressure with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (make Prayag/ polytuf)
Dismantling of CI/PVC pipe of 75mm dia fixed with cement joint.
Dismantling of AC/PVC pipe 100mm dia fixed with cement joint.
S&F PVC (SWR)pipes 110mm dia in any length with rubber ring joint fixed to wall complete all as specified and directed.
S&F PVC (SWR)bends 110mm dia, in any radius, complete all as specified and directed.
S&F PVC (SWR)branch pieces 110mm dia, in any radius, complete all as specified and directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors
S&F PVC (SWR)bends 75mm dia, in any radius, complete all as specified and directed.
S&F PVC (SWR)branch pieces 75mm dia, in any radius, complete all as specified and directed.
S&F in repairs vitreous china wash down water closet (pedestal pattern)white complte, incl connection to drain pipe and to flushing pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed.
S&F in repairs vitreous china wash down water closet (pedestal pattern) anglo indian type white complete, incl connection to drain pipe and to flushing pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed.
S&F plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device all as specified and directed.
S&F in repairs vitreous china wash basin white flat back 580mmx450mm excluding tap, waste, chine and plug and incl braches but exclusive of fixing of waste pipe all as specified and directed.
S&F PVC connections 15mm dia and 600mm long with brass nuts all as specified and directed.
S&F in repair PVC 10 lts capacity syphonic action type flushing cistern low level, white with inlet, ball valve float and handle incl brackets all as specified and directed.
S&F in repairs brass chroumium plated shower rose 125mm size all as specified and directed.
S&F tubular, towel rail brass chromium plated 20mm dia D type 60cm long between flanges all as specified and directed.
S & F in repair CP steel flushing jet including pipe for Europlan type closet of suitabe length with brass check nut complete.
S&F in repair CP 2 in 1 Wall Mixer for mixing hot and cold with crutch complete all as specified & directed.
S & F in repair Centre hole basin mixture W/O pop up waste system all as specified and directed.
S&F in repair PVC kit complete for low level PVC cistern all as specified and directed.
Dismantling of floor,hearth or wall tiling incl cement morter bedding area n exc 1.50 Sqm complete all as specified and directed.
S&F non skid ceramic dark/ light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.
M&L for dark/ light coloured (non skid) ceramic tiles of size 300x300x7mm thick over and incl 15mm thick cement screed in CM (1:6) set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the colour of tiles complete all as specified and directed.
M&L for ceramic glazed dark/ light coloured tiles of size 300 x 200x 6mm thick on and incl 10mm thick rendering in cm(1:4) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/dado complete all as specified and directed.
Taking down cement plaster from wall's incl raking out joints hacking for key scrubbing down with water complete all as specified and directed.
M&L 15mm thick rendering on fair faces of concrete/ brick surfaces of walls in CM 1:6 area n exc 2.00 sqm finished even and smooth without using extra cement complete all as specified.
Preparation of new plastered walls surfaces and applying two coats of oil bound distemper over one coat of primer on walls over incl 1mm thick wall care puttycompleted all as specified.
M&L for prepartion of old surfaces and applying one coats oil bound distemper paint on walls complete all as specified.
M&L for complete removal of existing treatment applying two coats of oil bound distemper over one coat of primer on walls over incl. 1mm thick wall care putty complete all as specified and directed.
M&L for preparation of old plastered or unplastered/old decorated surface of walls and applying one coats of white wash complete all spd and directed.
M&L for preparation of old decorated surfaces plastered or un plastered of ceilng and applying one coat of white wash on ceiling incl. complete removal of existing treatment complete all as specified and directed.
M & L for painting one coat of synthetic enamel paint to previously treated wooden surfaces of any description not otherwise described over 10cm width or girth with including preparation of old decorated surface complete all as specified and directed by Engr-In- Charge
M/s. Nirmal Singh
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .