GE (I) R AND D/CHD-81/2021-22

Amount

Demolition of cement concrete unreinforced of any description above or below ground level complete all as specified and directed.

Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking of shutters from the frames) exc 1.50 Sqm but n.exc 4 Sqm each complete all a sspecified and directed and removing to store.

All as per serial item no 3.00 above but not exc.1.5 sqm each complete all as specified and directed.

Demolition of brick or stone masonry work, built in cement mortar incl all quoinns, arches, pillars etc but excluding ashlar facings, dressed stone work complete all as specified and directed.

Dismantling floor/heart or wall tile including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

Dismantling of wooden boarding/wooden ply board fixed as in cup board shutters, any description with framed work, fixed in any position with screws complete all as specified and directed.

Dismantling of mild steel work of any description complete all as specified and directed.

Supply and fixing of framed work such as grills, gratings etc wth ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way, railings, framedwork of water tanks and similar work confirming to Fe 290 Gde-E-165

Supply and fixing for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240

Material and labour for Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exsisting area over and including 15mm thick screed bed or bedding of cement morter (1:6) for laying floor finish complete all as specified and directed.

Material and labour for Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exsisting area over and including 15mm thick screed bed or bedding of cement morter (1:6) for laying floor finish complete all as specified and directed.

Material and labour for non-skid colour ceramic tiles (joint free) 7 to 8 mm thick (square/rectangular) area of each tile execeeding 0.06 Sqm but n.exe 0.11 sqm , as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exsisting area over and including 15mm thick screed bed or bedding of cement morter (1:6) for laying floor finishs complete all as specified and directed.

Material and labour for non-skid colour ceramic tiles (joint free) 7 to 8 mm thick (square/rectangular) area of each tile execeeding 0.06 Sqm but n.exe 0.11 sqm , as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exesisting area over and including 10mm thick Rendering cement morter (1:4) for laying floor finishs complete all as specified and directed.

Material and labour for glazed ceramic digital tiles 450x350x7mm thick coloured/printed as in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match as in dado over and including 10mm thick cement rendering in CM (1:4) complete all as specified and directed.

Supply and fixing for Pressed steel frames 125 * 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete as specified and directed.

Supply and fixing for 35mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Supply and fixing for 30mm 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.

Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples

Supply and fixing for PVC door frame size 50mmX47mm dade out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification.

Supply and fixing for factory made solid panel PVC Wood Grain door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, M.S frame shall be covered with heat moulded plain colour PVC, C, Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rails and bottom rails on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fising in the frame at site as per specification and drawings complete all as specified and directed.

Supply and fixing of 100 mm butt hinges extruded aluminium aloyt with mild steel hinges pin anodized and fixed complete all as specified and directed.

Supply and fixing of aluminum anodised barrel tower bolt 150mm long of extructed section complete.

Supply and fixing of aluminum brass Antique type tower bolt 100 mm long of extructed section complete.

Supply and fixing of aluminum brass Antique type tower bolt 150 mm long of extructed section complete.

Supply and fixing of aluminum anodised handle cast type 150mm anodised complete.

Supply and fixing of aluminum brass Antique type handle 125mm anodised complete.

Supply and fixing of aluminium brass Antique sliding door bolt 300 mm (Bolt Type) and fixing clip of sheet cast or extructed section and fixing bolt and sliding bolt of extructed section or aluminum brass Antique and fixed complete all as specified and directed.

Material and labour for rendering 15mm thick in CM (1:4) on other than fair faces of brick/concrete surfaces of walls, finished fair and even al as specified and directed.

Material and labour for rendering 5mm thick in CM (1:3) on concrete surfaces of ceiling finished fair and even al as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applyling two coats of exterior emulsion over a coat of priming plastered and other surfaces with allkali resistant priming coat on externall wal surfaces all as specified and directed.

Material and labour for rendering 10mm thick on fair faces of brick work surfaces in internal wall with CM (1:6) finished with even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applyling two coats of oil bond distemper (OBD) over a coat of 3mm putty on internal wall surfaces all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coat of oil bound distemper on ceiling over a coat of 3mm putty complete all as specified and directed.

Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exc. 6m mean radius built in cement mortor 1:6 complete all as specified and directed.

All as per serial item no 34.00 above but except brick straight or curved on plan exc. 6m mean radius built in cement mortor 1:6 complete all as specified and directed incl cleaning of bricks

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish

Material and labour factory made ERW section window box type( P section ) with hinges, steel handle ,peg stay, complete with glazing bars and guard bars, dovetailed or welded (to receive glazeed or gauzed) complete all as specified and directed.

Material and labour factory made ERW section window box type( P section ) with hinges, steel handle ,peg stay, complete without glazing bars and guard bars, dovetailed or welded complete all as specified and directed.

Supply and fixing for steel ventilator fixed with glazing bars

Hacking out old broken glass of any thickness, size quality and description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing of 3mm thick plain sheet glass, ordinary quality and glazing with oil puttly in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply and fixing of 3mm thick figured sheet glass, pin head type ordinary quality and glazing with oil puttly in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregates as in plinth protection/pavings including finishing surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 25mm thick plain cement concrete (1:2:4) type B-0 using 12.5 mmgraded stone aggregates as in plinth protection/Floor/pavings including finishing surface even and smooth without using extra cement complete all as specified and directed.

Supply and fixing for 18 to 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.

Supply only contineous (Piano) hinges mild steel, bright finih with width 30mm (when open) complete all as specified and directed.

Supply and fixing of second class soft-wood plain fillets, square, rectangular or rectangular or triangular in section with sectional area exceeding 13 & n.exc 25 Sqcm fixed with screws as fixed in wooden frame for Cub boards complete all as specified and directed.

Supply and fixing of aluminium magnatic door catcher of suitable size for for each shutters of Cub boards complete all as specified and directed

Supply and fixing of aluminium Locks of size 50mm with 2 levers, Grade-I for cupboard complete all as specified and directed.

Material and labour for french polishing on surfaces of any description width or girth includig cleaning and preparing the surface including a coat of wood filler on new works on cupboard wooden frames with two coats or more complete all as specified and directed.

Material and labour for Preparation of new surfaces of fillet portion of cupboard not exc 10cm in width or girth when unconnected with other work and finishing with 2 coat of synthetic varnishing complete all as specified and directed

Supply and fixing for 20mm dia bore of Gate/Stop valves, cast copper aloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unins and fixed complete all as specified and directed.

Supply and fixing for 15mm dia bore of Gate/Stop valves, cast copper aloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unins and fixed complete all as specified and directed.

Dismantling water tanks ( Capacity 500 Ltrs), removing from site and supply and fix rotational moulded polythenlyte water storage tank (cylinderical verticial with closed top with PVC tank cover ) of capacity 500 ltrs, hoisted and fixed in position complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan,”Orissa” pattern, size 580mmX440mm, white, with integral foot rests, ‘S’ trap (excluding flushing cistern and flush pipe) and provision of lime concrete bedding fixed in repairs complete all as specified and directed.

Supply and fix in repair vitreous china wash basin, white, flat back, size 550X400mm excluding taps, waste chain and porcelain stopper but including brackets, waste pipe, waste couplingcomplete all as specified and directed.

Supply and fixing in repair PVC connection pipe 15mm size, 450mm long with PTMT nuts on both ends suitable for 15mm bore tubing complete all as specified and directed.

Taking up or down, steel tubing 15mm bore, and connections completed all as directed.

Taking up or down, steel tubing 20mm bore, and connections complete all as directed.

Supply and fix galvanized steel tubing, medium grade, 15mm bore with all fittings and fixed complete to walls and ceiling or laid in floor all as specified and directed.

Supply and fixing for galvanized steel tubing, medium grade, 20mm bore with all fittings and fixed to walls and ceiling or laid in floor all as specified and directed.

Supply and fixing in repair bib tap, chromium plated, cast copper alloy, crutch or buttrfly handle, screwed down, screwed for iron pipes or brass ferrule, 15mm bore, fixed in repairs, complete all as specified and directed.

Supply and fixing in repair 15mm bore angle cock, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions,and cup & concealed fixed complete all as specified and directed.

Supply and fixing in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, screwed for steel pipes, 15mm bore, fixed in repairs, complete all as specified and directed.

Supply and fixing in repair tubular towel rail with brackets, brass chromium plated 20 mm dia 'D' type 60 cm long between flanges

Supply and fixing in repair Grating doom 125 mm dia with waste hole of CP (minium weight 40 gms) complete all as specified and directed.

Supply and fixing in repair soap dish any type fixed to plugs with chromium plated brass screws completer all as specified and directed.

Supply and fixing for low density polyethylene (LDPE) pipes of 40 mm dia of pressure rating 6kgf/sq.cm complete all as specified and directed.

Supply and fixing for low density polyethylene (LDPE) pipes of 32 mm dia of pressure rating 6kgf/sq.cm complete all as specified and directed.

Supply and fixing in repair Plastic water closet seat cover of Black/White, closed with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing in repair PVC valveless syphonic action type flushing cistern of 10 ltr capacity low level,white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply and fixing in repair Vitreous China Wash down water closet pan pedestal pattern, anglo intian type, complete including making good to floor including trap set and including concrete all as specified and directed.

Supply and fixing in repairs of stainless steel sink 1143X510mmX203mm wide made out of 1.00mm thick sheet and with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing over 60cm long MS angle of size 25mmX25mmX3mm-02 Nos each and connecting to union pipe complete all as specified and directed

Dismantling/taking down AC rain water pipe (any size) including all fittings, head shoes, bends complete and removing from site all as specified and directed.

Supply and fixing for 110mm dia PVC (SWR) rain water pipes single socketed, in any length with rubber ring joint fixed to wallall as specified and directed.

Supply and fixing for 75mm dia PVC reducer of approved make complete all as specified and directed.

Supply and fixing for 110mm dia PVC (SWR) bends any radius of approved make all as specified and directed.

Material and labour for 110mm bore PVC (SWR) junction singe (Single T) equal or unequal complete all as specified and directed.

Supply and fixing of PVC (SWR) vent cowl for 75mm dia pipe complete all as specified and directed.

Supply and fixing of 75mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete.

Supply and fixing of 20mm thick machine cut granite (of any type) with fixed on kitchen platform etc over & including 10mm thick rendering in CM (1:4) and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including cutting and polished all as specified and directed.

Material and labour for rounding to edges of granite stone slab for kithen platform etc. one edge.

Material and labour for machine cut Kota stone slab flooring of 20-25 mm thick laid over and including 20mm thick screed bed or bedding in layer of mortar in cement mortar 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour for machine cut Kota stone slab of 20-25 mm thick fixed as in riser and steps,skirting, dado and pillar laid over 15mm thick cement screed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour for preparation of Old plastered surfaces and applying two coat of oil bound distemper over one coat of 3mm putty on wall after complete removal of existing treatment complete all as specified and directed.

Material and labour for preparation of Old plastered surfaces and applying two coat of oil bound distemper over one coat of 3mm putty on ceiling after complete removal of existing treatment complete all as specified and directed.

Material and labour for preparation of Old plastered surfaces and applying two coat of exterior emulsion paint over one coat of alkali resistant primer on wall after complete removal of existing treatment complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described for, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted steel surface of any description over 10cm width or girth, not otherwise specifically described for and applying one coat of synthetic enamel paint complete all as specified and directed

Material and labour for preparation of new or perviously untreated wooden surfaces of any description, not otherwise described for, over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Material and labour for preparation of new or perviously untreated steel surface of any description over 10cm width or girth, not otherwise specifically described for and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed

Supply and fix in repair brass chromium plated shower rose with swivel joints, 100mm dia, fixed to 15mm bore steel pipe or union complete all as specified and directed.

Material and labour for PCC chequered tiles with grey cement and pigment 25cmX25cmX25mm thick set & jointed in neat cement slurry as in path, pavement, floors, etc over 20mm thick screed bed CM (1:6) complete all as specified and directed.

Dismantling of Asbestos cement/corrugated translucent sheeting (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified.

Supply and fixing for Fibre glass reinforced translucent corrugated sheting with two corrugations side lap fixed with coach screw as in chajja etc

Removing and disposal of debris materials exceeding 1.5km but not exceeding 5 km and depositing outside the factory area all as specified and directed.

Material and labour for preparetion of plastered or unplastered old decorated surface of wall includind pillaster and cornices etc and applying two coat of plastic emulsion paint on wallover a layer of birla putty complete all as specified directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one switch.

All as per serial item no 100.00 above but One ceiling Fan point controlled by one switch.

All as per serial item no 100.00 above but One exhaust Fan point controlled by one switch.

All as per serial item no 100.00 above but One bell point controlled by bell push switch.

All as per serial item no 100.00 above but One 3 pin socket outlet 5 Amps on independent board.

All as per serial item no 100.00 above but One 3 pin socket outlet on same board.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 2.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/ pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 2.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complee all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent.

Taking down carefully by unscrewing from light fittings and fixtures such bulk head fittings, tube light fittings etc.

Supply and fixing for LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing for lamp holder , PVC/Poly carbonate type with back plate all as specified and directed.

Supply and fixing for Bell Multi Music type

Supply and fixing for Modular switch 1 way 6A, 1 module

Supply and fixing for Modular switch 1 way 16A, 1 module

Supply and fixing for Modular bell switch 1 way 6A, 1 module

Supply and fixing for Socket, 6A - 2/3 pin combined 2 module

Socket 6A/16A - 2/3 pin combined 2 module

Supply and fixing for Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body

Supply and fixing for modular white cover plate with frame 1 moudule in Peral white/apporved shade for housing modular switch/sockets complete all as specified and directed.

Supply and fixing for modular white cover plate with frame 2 moudule in Pearl white/approved shade for housing modular swithc/sockets complete all as specified and directed.

Supply and fixing for modular white cover plate with frame 3 moudule in Pearl white/approved shade for housing modular swithc/sockets complete all as specified and directed.

Supply and fixing for modular white cover plate with frame 4 moudule in Pearl white/approved shade for housing modular swithc/sockets complete all as specified and directed.

Supply and fixing for modular white cover plate with frame 6 moudule in Pearl white/approved shade for housing modular swithc/sockets complete all as specified and directed.

Supply and fixing for modular white cover plate with frame 8 moudule in Pearl white/approved shade for housing modular swithc/sockets complete all as specified and directed.

Supply and fixing for GI box suitable for modular switch sockets complete for 1 and 2 module

Supply and fixing for GI box suitable for modular switch sockets complete for 3 module

Supply and fixing for GI box suitable for modular switch sockets complete for 4 module

Supply and fixing for GI box suitable for modular switch sockets complete for 6 module

Supply and fixing for GI box suitable for modular switch sockets complete for 8 module

Supply and fixing for bell ding - dong / musical 230volts, single phase complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

Supply and fixing for Fan step regulator, 120W - 2 module

Taking down unservicable main switch/DB/MCBs incl disconnecting from mains and making good the disturbed surfaces.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB

Supply and fixing for sheet metal enclosure for MCB, DB, SPN 230 Volts 200 amps rated busbar 8 way double door complete including taking down all as specified and directed by Engr-in-charge.

Supply and fixing for amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 5 to 32 AMP single pole current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply and fixing fo amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 32 AMP double pole current carrying capacity in the MCB DB complete with connection testing and commissioning

Taking carefully aluminium sub main wiring with the existing casing /caping/ PVC conduit all as directed.

Material and labour for sub main wiring with PVC insulate unsheathed FRLS 2 x 4 sqmm multi stranded copper conductor cable 1100 volts grade heavy duty drawn into concealed conduit with 2.5 sqmm PVC FRLS insulated green copper cable for continuos earth PVC pipe not less than 25 mm dia with all accessories complete all as specified and directed

Material and labour for sub main wiring with PVC insulate unsheathed FRLS 2 x 6 sqmm multi stranded copper conductor cable 1100 volts grade heavy duty drawn into concealed conduit with 4 sqmm PVC FRLS insulated green copper cable for continuos earth PVC pipe not less than 25 mm dia with all accessories complete all as specified and directed

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

M/s Krishan Aggarwal

Havish Construction

GOODWILL ENGINEERS

RAJESH KUMAR

KUMAR AND COMPANY