Extension of ATDC DG set Exhaust Pipe and repair of DG AMF Panel/s installed at ATDC, Water Works and Biotechnology Department, IIT Kharagpur.

Amount

VMR DIGITAL (PROTON : MAINS 4 DG 2 POINT ) FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

INDICATING LAMP ( L&T/C&S ) FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

ACTUATOR FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

SUPPLYING AND FIXING 4 A TO 32 A RATING, 240/415 V, 10 KA, "C" CURVE, MINIATURE CIRCUIT BREAKER SUITABLE FOR INDUCTIVE LOAD OF DOUBLE POLES IN THE EXISTING MCB DB COMPLETE WITH CONNECTIONS, TESTING AND COMMISSIONING ETC. AS REQUIRE FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP MAKE: LEGRAND/L&T/HAGER/APPROVED BY EIC

RELAY MODULE 4 CH 24VDC ( OEN ) FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

AUXILARY CONTACTOR ( L&T 240V DC ) FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

VAF CLASS 1 METER ( L&T OR MULTISPAN ) FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

CT COIL ( 1000/5 KAPPA OR RISHAV ) FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

FUSE TERMINAL ( ELMECH ) FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

ACCESSORIES ( SOCKET , FERRULE ETC ) FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

ON / OFF SWITCH ( L&T OR GIGO ) FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

CONTROL WIRING MODIFY AND RENEW FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

DIP STICK FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

HORIZONTAL PIPE 150MMNB MS BLACK PIPE FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

VERTICAL PIPE 200 MMNB MS BLACK PIPE FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

MS BEND BLACK 150 MMNB FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

MS BEND BLACK 200 MMNB FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

MS REDUCER BLACK 150 /200 MMNB FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

MS INSPECTION PORT BLACK 150 MMNB FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

STRUCTURAL STEEL WORK RIVETED, BOLTED OR WELDED IN BUILT UP SECTION TRUSSES AND FRAME WORK, INCLUDING CUTTING, HOISTING, FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVAL STEEL PRIMERALL COMPLETE WITH ISMC AND ISMA 9 MT HIGH FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

EARTH WORK IN EXCAVATION BY MECHANICAL MEANS (HYDRAULIC EXCAVATOR) / MANUAL MEANS IN FOUNDATION TRENCHES OR DRAINS (NOT EXCEEDING 1.5 M IN WIDTH OR 10 SQM ON PLAN), INCLUDING DRESSING OF SIDES AND RAMMING OF BOTTOMS, FOR ALL LIFT, INCLUDING GETTING OUT THE EXCAVATED SOIL AND DISPOSAL OF SURPLUS EXCAVATED SOIL AS DIRECTED, WITHIN A LEAD OF 50 M FOR ALL KINDS OF SOIL.

PROVIDING AND FIXING AT OR NEAR GROUND LEVEL PRECAST CEMENT CONCRETE IN KERBS, EDGINGS ETC. AS PER APPROVED PATTERN AND SETTING IN POSITION WITH CEMENT MORTAR 1:3 (1 CEMENT : 3 COARSE SAND), INCLUDING THE COST OF REQUIRED CENTERING, SHUTTERING COMPLETE.1:1.5:3 (1 CEMENT: 1.5 COARSE SAND (ZONE-III) INCLUDING MANUFACTURED SAND DERIVED FROM RECYCLED CONCRETE AGGREGATE (RCA) UPTO 25% : 3 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE INCLUDING RECYCLED CONCRETE AGGREGATE (RCA) UPTO 25%)

PROVIDING AND LAYING IN POSITION SPECIFIED GRADE OF REINFORCED CEMENT CONCRETE, EXCLUDING THE COST OF ENTERING, SHUTTERING, FINISHING AND REINFORCEMENT - ALL WORK UP TO PLINTH LEVEL :1:1.5:3 (1 CEMENT : 1.5 COARSE SAND (ZONE-III) DERIVED FROM NATURAL SOURCES : 3 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE DERIVED FROM NATURAL SOURCES)

STEEL REINFORCEMENT FOR R.C.C. WORK INCLUDING STRAIGHTENING, CUTTING,BENDING, PLACING IN POSITION AND BINDING ALL COMPLETE UPTO PLINTH LEVEL. 5.22.6 THERMO-MECHANICALLY TREATED BARS OF GRADE FE-500D OR MORE.

CENTERING AND SHUTTERING INCLUDING STRUTTING, PROPPING ETC. AND REMOVAL OF FORM WORK FOR :FOUNDATIONS, FOOTINGS, BASES FOR COLUMNS

THERMAL ROCKWOOL INSULATION( MINIMUM THICKNESS- (125 MM OR ABOVE SUITABLE TO WITHSTAND 500 DEGC )INSULATION OF ABOVE PIPE. THE INSULATION SHALL BE FINISHED 24 GAUGE AL CLADING FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

PAINT PRIMER ( 2 COATS ) FOR STRUCTURE FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

PAINT ENAMEL ( 2 COATS ) FOR STRUCTURE FOR 625 KVA D.G.SET INSTALLED AT ATDC IIT KGP

GOVERNOR CONTROL CARD -GSA FOR 250 KVA D.G.SET INSTALLED AT BIOTECH BLDG

CONTROLLER SET DEEP SEA ELECTRONIC 4520 FOR 250 KVASET INSTALLED AT IIT KGP BIOTECH BLDG

SUPPLY OF 3.5C X 400 SQMM 1.1 KV XLPE AL ARMOURED CABLE AS PER IS 7098 PART-I

LAYING OF ONE NUMBER 3.5C X 400 SQMM PVC INSULATED AND PVC SHEATHED / XLPE POWER CABLE OF 1.1 KV GRADE DIRECT IN GROUND INCLUDING EXCAVATION, SAND CUSHIONING, PROTECTIVE COVERING AND REFILLING THE TRENCH ETC AS REQUIRED.

LAYING OF ONE NUMBER 3.5C X 400 SQMM PVC INSULATED AND PVC SHEATHED / XLPE POWER CABLE OF 1.1 KV GRADE IN THE EXISTING MASONRY OPEN DUCT AS REQUIRED. MAKE: POLYCAB / HAVELLS/ KEI / APPROVED BY EIC.

SUPPLYING AND MAKING END TERMINATION WITH BRASS COMPRESSION GLAND AND ALUMINIUM LUGS FOR 3.5C X 400 SQMM OF PVC INSULATED AND PVC SHEATHED / XLPE ALUMINIUM CONDUCTOR CABLE OF 1.1 KV GRADE AS REQUIRED.

EXISITING CONTROL WIRIE REMOVING AND REWIRING AFTER POWER CABLE INSTALLATION IN AMF PANEL AT INSTITUTE WATER WORKS SECTION