Tender ID

Himachal

Cancelled

Works

Civil Works

A/R and M/O to various Type-I to type-VI Qtrs.of GAD at Kasumpti Shimla

Public Works Department

kasupti | Himachal Pradesh

Amount: Refer DocsCloses: 2 May 2026Closed

Timeline

Published24 Apr 2026
Closed2 May 2026
Cancelled4 May 2026

Cancellation Details

Cancellation of Tender

Cancellation of TenderCancellation of TenderReason: No Bids receivedDocument: cancelled_1.pdf

Published 4 May 2026

Tender Value

Refer Docs

EMD Value

₹12,200

Closing Date

2 May 2026, 10:00 amClosed

Tender Inviting Organisation

Name

Executive Engineer kasumpti Division HPPWD Shimla3

Address

Executive Engineer kasumpti Division HPPWD Shimla3

Work Description

Providing and fixing cup-board Type-I Set no. 218, 217, 214, 212,211, Type-III 167, 135, 136, 163, 164, 155,etc under Kasumpti sub-division

Tender Information

Tender ID

2026_PWD_134905_1

Reference Number

SD-I-CTR-Tender-2026- 1518 dt 20-04-2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

30 days

Location

kasupti

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per SBD

Documents Required

13 documents required · 13 mandatory

Fee/PreQual/Technical

RequiredCost of Tender Form On line (.pdf)

RequiredEarnest Money Deposit on line (.pdf)

RequiredContractor registration IN APPROPRIATE CLASS (.pdf)

RequiredGST registration and PAN No (.pdf)

RequiredWork in hand certificate (As per Performa given in General rule No.16 (.pdf)

RequiredMachinery tools and plants (As per schedule F with reference to clause 18 (.pdf)

RequiredForm No. 7/8 duly signed (.pdf)

RequiredThe Contractor Shall give affidavit regarding List of both gazette and non gazette HPPWD Employees (.pdf)

RequiredProof of registration under Employee Provident Funds and Miscellaneous provision Act. 1952 (.pdf)

RequiredAffidavit that information furnished with the bid is correct in all respect (.pdf)

Requiredemail Mobile No , and Full Address (.pdf)

RequiredAny additional information (.pdf)

Finance

RequiredBill of quantities (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹12,200

Important Dates

Last Activity

4 May 2026

Published

24 Apr 2026

Bid Opening

2 May 2026

Download Starts

24 Apr 2026

Download Ends

2 May 2026

Submission Starts

24 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (2 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.
2	Providing and fixing 0.80 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.	1	Per Square Meter	-	-
3Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 6mm thick thick
3.1	9 mm thick thick	-	Per Square Meter	-	-
4Providing and fixing square edges cover fillets (beading) 19mmx6mm(Nineteen milimetre into six milimetre) section i/c mitring at junctions with wood screws and nails complete including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge.(i)1st class deodar wood.
5Providing and fixing bright finished brass ball catcher 10 mm dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
6Providing and fixing bright finished brass handles with screws etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm (One hundred milimetre) Make ESS ESS
7Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting including carriage of materials in all leads as per directions of the Engineer-in-Charge.
8Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint.
9Providing wood work in frames of doors,windows, clerestory,windows and other frames wrought,framed and fixed in position including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(i) 2nd class deodar wood

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.35 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.51 MB

Work Item Documents

SBD638033.pdf

Tender Documents • 7.00 MB

BOQ_199622.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.
2	Providing and fixing 0.80 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.	1	Per Square Meter	-	-
3Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 6mm thick thick
3.1	9 mm thick thick	-	Per Square Meter	-	-
4Providing and fixing square edges cover fillets (beading) 19mmx6mm(Nineteen milimetre into six milimetre) section i/c mitring at junctions with wood screws and nails complete including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge.(i)1st class deodar wood.
5Providing and fixing bright finished brass ball catcher 10 mm dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
6Providing and fixing bright finished brass handles with screws etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm (One hundred milimetre) Make ESS ESS
7Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting including carriage of materials in all leads as per directions of the Engineer-in-Charge.
8Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint.
9Providing wood work in frames of doors,windows, clerestory,windows and other frames wrought,framed and fixed in position including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(i) 2nd class deodar wood

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Providing and fixing 0.80 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.

Per Square Meter

3Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 6mm thick thick

3.1

9 mm thick thick

Per Square Meter

4Providing and fixing square edges cover fillets (beading) 19mmx6mm(Nineteen milimetre into six milimetre) section i/c mitring at junctions with wood screws and nails complete including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge.(i)1st class deodar wood.

5Providing and fixing bright finished brass ball catcher 10 mm dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

6Providing and fixing bright finished brass handles with screws etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm (One hundred milimetre) Make ESS ESS

7Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting including carriage of materials in all leads as per directions of the Engineer-in-Charge.

8Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint.

9Providing wood work in frames of doors,windows, clerestory,windows and other frames wrought,framed and fixed in position including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(i) 2nd class deodar wood