Improving Disaster resiliency and retrofitting of CHC building Bhabanagar in Distt. Kinnaur HP SH- Dismantling and demolishing work retrofitting work and finishing work thereof.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. including carriage of materials in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 meters lead. un-reinforced cement concrete upto 15cm. Thickness including carriage of materials in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50.00 meters including carriage of materials in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought ,framed and fixed in position.2nd class Deodar wood. including carriage of materials in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of materials in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood paneled glazed or paneled and glazed shutter for doors, windows and clere story windows including black enameled iron butt hinges with necessary screws including carriage of materials in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g. With wire of dia 0.56mm for doors, windows and clerestorey windows including bright finished black enameled iron hinges with necessary screws. 2nd class deodar wood including carriage of materials in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm (fifteen into ten into ten centimetre) with cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (twenty millimetre) nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

a) Doors

b) Windows

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia (fourty millimetre diametre) M.S. tube 1.5 m (one point five metre) center to center, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter.The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-in-Charge. 50 mm (fifty millimetre) average thickness complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Drilling suitable holes for dowel bar in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm (one hundred millimetr) upto 200mm (two hundred millimetre) in RCC beams, lintels, columns and slabs to introduce steel bars including fixing the steel/dowel bars in position using epoxy resin anchor grout of approved make including the cost of steel, all complete as per direction of Engineer- In-Charge. Upto and including 12mm dia (twelve millimetre diametre ). complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Shotcreting on masonry walls, R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm (ten millimetre)maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in- Charge Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument. 75 mm (seventy five millimetre) thick in Grade M 30 (thirty) with cement content not less than 340Per Kilogram (three hundred fourty killogram) per Per Cubic Meter (cubic metre) . complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and inserting 12mm dia (twelve millimetre dia metre) galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20mm to 30mm )(twenty millimetre to thirty millimetre) up to depth from 30mm (thirty millimetre)to 80mm (eighty millimetre) at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer- In-Charge complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying a bonding coat of 1.5 (one point five)Cement:1 (one)Pidicrete URP or approved equivalent construction chemical to the existing dismantled/cleaned surface, complete at all levels and as directed by Engineer-in-charge complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Epoxy pressure grouting: inside voids should be treated and sealed with impermeable non shrinkage low viscous epoxy grouting materials (which are threatening the structural integrity or water tightness with mix density of 1.05 Per Kilogram/liter(one point zero five killogram) and Compressive strength (ASTM C579) of 70 (seventy) MPa at 7 (seven) Days) and then it should be levelled with polymer mortar concrete (PMC). (pressure gauge shall be provided to show delivery pressure of grouting material - vary from 4 Per Kilogram/cm2 (four killogram) to 6 Per Kilogram/cm (six killogram) depending upon site condition, as per direction of Engineer-in charge complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and injecting into Cracks / Honey Comb approved epoxy base grouting material as per instructions and specifications of the manufacturer. The injection will be done by gun/pump at required pressure including cutting of nipples after curing etc. as per Specifications- Acceptable product make: Pidilite/CICO/CIBA/FOSROC/Fairmate or equivalent complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Strengthening structural elements with non-metallic composite fiber wrapping system comprise of uni-directional glass fiber sheet (900 GSM) (nine hundred) and compatible saturant, by wet layup system including, Surface preparation: Grinding/ moldings concrete substrate, cleaning it with wire brush removing oil, laitance if present, rounding sharp edges to min 25 mm (twenty five millimetre) radius etc. complete. Profiling: Applying compatible primer on prepared substrate, Filling the holes and uneven surface with thixotropic putty etc. complete. Wrapping: Wrapping the fiber sheet to structural element at desired orientation using tamping roller to avoid any air voids etc. repeat the same procedure for multiple layer with the interval of 8 hrs (eight) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (one Cement: three fine sand) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand) and jointing with grey cement slurry @ 3.3Per Kilogram per Per Square Meter (three point three killogram er squaremetre), including pointing in white cement mixed with pigment of matching shade complete complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 Per Kilogram/10 Per Square Meter) (three point eight four killogram) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.