Const.of.balanceworkMDSjhansi

Amount

Labour Work only

Mild Steel or Iron in plain for 8mm dia and above i/c cutting, placing supply of bindingwire for proper completion of work i/c

40mm PCC flooring 1:2:4 neat Cement finished

15/12 mm plaster 1:6 Cement, course sand mortar

20mm plaster 1:3 cement, course sand, neat cement finished

Fixing of 600x600 mm size vitrified tiles 20mm base 1:3 cement, course sand mortar

Fixing of 200x450/300x300mm wall/floor tiles 1:3 cement, course sand mortar

Fixing of Tata durashine sheet in proper position

Fixing of 600 mm Wide Ridge

100 mm avarage thick brick coba treatment as per specification

Fixing of MS truss i/c Cutting welding as per specified MS Pipe Such as purling members rafter etc.

M.S. Iron door chaukhat 35x35x5/40x40x5 mm size section i/c hold past fixing with 1:1½:3 c:c/s:s/g

Supply of Materials

Supply of tata durashine sheet 0.63mm thick as per specification

Supply of 600mm wide ridge 0.63 mm thick

M.S. Truss as per drawing and specification and direction of engineer in charge

Mild Steel or Iron for 8mm dia and above (ISI make)

M.S. Iron door chaukhat 35x35x5/40x40x6 mm size section (ISI Make) with hold past 62mm dia tie rod etc.

Over all Rate (Material with Labour)

Supply & fixing of 3.80x4.00 mm Glass Strips

Making Drip Course i/c all material and labour

Making Deepline in plaster

Supply and fixing 110mm SWR pipe i/c bend shoe etc complete

Antitermite treatment as per specification

Supply and fixing collepsible shutter as per drawing direction of engineer incharge

Supply and fixing of commercials flush door shutter ISI make 30mm thick

S/f steel door fitting

S/f of Stainless steel railing as per drawing direction of engineer in charge

Supply and fixing of aluminium doors window ventilators and partition as per specification direction enginee in charge

Supply and installation of synthetic indoor sports flooring system PAVISINT SL 75 of 12mm thick composed of spormat high quality recyled rubber granuts and polyurethane elastomers of thickness 10mm, tensile sstrenth DIN 53571:0.6-1mpa coated with pu sealer and self leveling wear coat and top coat with 2mm polyurethane system, approved by BWF FIBA/AENA category 3 with specification of (i) force reduction (EN14808):>25% (ii) standard deformation : 0.5mm (iii) rolling load: 1500N(iv) ball bounce: 100% (v) impact resistance:15 Nm (vi) En 14094: pass

Sanatory Works

p/fixing of water closet squatting pen (indian type W.C. pan) with 100 mm sand cast iron P or S Trap 10 liter low level white PVC flushing cistern with manually controlled device (handle level) confirming to IS:7231, with all fitting and fixtures complete including cuttin and making good the walls and floors wherever required white virteous china orissa pattern W.C. Pan of size 580x440mm with integral type foot rests.

P/fixing vitreous china pedestal type water closet (European type) with seat and lid 10 liter low level white vitreous china flushing cisten & CI Brackets 40mm flush bend, over flow arrangement with specials of standard make and mosquito proff coupling of approved municipal design complete including painting of fitting and brackets cutting and making good the walls and floors wherever required. W.C. Pan with ISI marked white solid palstic seat and lid

P/fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes resoectuvely with automatic flushing cistern with standard flush pipe and C.P. brass unions and GI clamps complete including Painting of fittings and brackets cutting and making good the walls and follrs wherever required one urinal basin whti 6 liter whit PVC automatic flushing cistern

Range of two urinal basins with 5 liter white PVC automatic flushing cistern

Providing & fixing wash basin with CI brackets, 15mm C.P. brass piller taps 32mm C.P. Brass waste of standard pattern, including Painting of fitting and brackets cutting and making good the wall wherever required. White vitreous chna wash basin size 6300x450mm with a pair of 15mm C.P. brass piler taps

Supply and fixing of handicap toilet European w.c pan, wash basin, SS railing, jali etc including all fitting and completion of work.

Proving and fixing rectangular high density polyethylene wate storage loft tank with cover conforming to ISI: 12701, colour of opaque white or as approved by engineer in charge. The rate includes making necessary holes for inlet, outlet & over flow pipes the base support i/c fitting and fixtures for tank shall be paid seperately.

Providing & fixing 8mm dia C.P./S.S. Jet with flexible tube up to 1 mtr long with S.S. traingular plate to Eureopean type WC of quality and make as approved by engineer in charge

Providing and fixing GI inlet connection for flush pipe connecting with WC pan

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete flexible pipe 32mm dia

Providing and fixing 600x450mm beveled edge mirror of suuperior glass (of approved quality) complete with 6mm thick hard board fixed to wooden cleats with C.P. Brass screws and washers complete

Providing and fixing PTMT towal rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colours

Providing and fixing CP Brass angle valve for basin mixter and geyser points of approved quality conforming to IS : 8931. 15mm nominal bore

Providing and fixing CP Brass bib cock of approved quality conforming to IS :8931

Providing and fixing CP Brass Long body bib cock of approved quality conforming to IS standards and weighting not less than 690 gms. 15mm nominal bore

Providing and fixing ball valve (brass) of approved quality, high or low pressure with palstic floats complete. 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, high or low pressure with palstic floats complete. 25 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions.30 cm length 15mm nominal bore

Providing and fixing C.P. Bass shower

Providing and fixing GI pipes complete with GI fittings and Clamps, i/c making good the walls etc. concealed pipe, including painting withanti corrosive bitumastic paint, Cutting chases and making good the wall, 15mm Nomonal bore

Providing and fixing GI pipes complete with GI fittings and Clamps, i/c making good the walls etc., 20 mm nominal bore

Providing and fixing GI pipes complete with GI fittings and Clamps, i/c making good the walls etc., 25 mm nominal bore

Making connection of G.I distibution branch with GI main of following sizes by providng and fixing Tee, including cutting and threading the pipe etc complete. 25 to 4mm nominal bore

Providing and fixing GI pipes complete with GI fitting including trenching and refilling etc.

Providng and fixing soil, waste and vent pipes. 100mm dia

Providng and fixing soil, waste and vent pipes. 75 mm dia

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolt and nuts complete. 100mm dia

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolt and nuts complete. 75mm dia

Providing and fixing plain bend if required degree. 100mm dia

Providing and fixing plain bend if required degree. 75mm dia

Providing lead caulked joints to sand cast iron/centrifugally cal (spun) iron pipes and fittings of diameter. 100mm

Providing lead caulked joints to sand cast iron/centrifugally cal (spun) iron pipes and fittings of diameter. 75mm

Providing and fixing 100mm collar

Providing and fixing 75mm collar

Providing and fixing 100mm sewer line

Main Hole

Excavation in foundation in soil mixed with moorum/shingle/kankar in bundelkhand rea required use of specials tools and plants such as pick axes and sabbal etc. (rate including royality) For one no. Qtd. 0.79 cum. For 8 no qtd. 6.32 cum

PCC in 1:4:8 in C;C/s:ballast (40mm) For one no. Qtd. 0.075 cum. For 8 no qtd. 0.60 cum

M 150 brick wok in 1:4 cement and coarse sand of mortar in foundation in 230mm thick wall including supply of all materials labours and T&p etc.. Required for proper completion of the work. For one no. Qtd. 0.79 cum. For 8 no qtd. 6.32 cum For one no. Qtd. 0.46 cum. For 8 no qtd. 3.68 cum

20mm plaster with 1:4 C:C/s neat cement For one no. Qtd. 1.44 sqm. For 8 no qtd. 11.52 Sqm

25 mm PCC flooring in 1:2:4 C:C/s:S/g For one no. Qtd. 0.36 Sqm. For 8 no qtd. 2.88 sqm

RCC in 1:1½:3 C:C/s:S/g top cover i/c all material labour T&P For one no. Qtd. 0.07 cum. For 8 no qtd. 0.56 cum

Total Sheet in rainforcement For one no. Qtd. 7.44 kg. For 8 no qtd. 59.52 kg

Septic Tank (50 Users)

Excavation in foundation in soil mixed with moorum/shingle/kankar in bundelkhand area required use of specials tools and plants such as pick axes and sabbal etc. (rate including royality)

PCC in 1:4:8 in C;C/s:ballast (40mm)

M 150 brick wok in 1:4 cement and coarse sand of mortar in foundation in 230mm thick wall including supply of all materials labours and T&p etc.. Required for proper completion of the work.

RCC in 1:1½:3 C:C/s:S/g top cover i/c all material labour T&P

Cutting and binding of steel

20mm plaster with 1:4 C:C/s neat cement

25 mm PCC flooring in 1:2:4 C:C/s:S/g

SOAK PIT

Excavation in foundation in soil mixed with moorum/shingle/kankar in bundelkhand area required use of specials tools and plants such as pick axes and sabbal etc. (rate including royality)

First Class brick wok in 1:4 cement and coarse sand of 1.25 FM mortar in above plinth supply of all materials labours and T&p etc.. Required for proper completion of the work.but in super structure in 115mm wall including providing scaffolding rope, Chahlies fixing and removeal. in super structure work in honey comb brick work with 1:4 c;sand

Providing and laying 40mm gauge brick ballast in soak pit including supply of all material, labour T&P required for proper completion of work

RCC work with cement approved course sand and 2 cm (3/4)" gauge approved stone ballast in the proportions of 1:1½:3 in lintels of doors and windows excluding supply of rainforcement and its bending the same with 24 BWGGI binding wire and including necessary centering and shuttering etc. and also including supply of all materials labours and T&P required for proper completion of work binding wire cost being including in the item but for slab etc.

Mild steel or iron in plain work such s reinforced concrete or reinforced brick work (when nit included in an over all rates) wrough to required shape as necessary including bending for proper completion of the work and sicluding supply of all steel and wastage and over lapping and hooks for slab

Making connection from septic tank

M/S Arvind Kumar