Modification work at CDAC Pune

Modification work

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc

Dismantling of cement concrete member by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete

Taking out windows grill by cutting/ removing edges including stacking within 50 metres lead

Disposal of Debris: Loading to trauck, the generated Debris outside of CDAC Campus, etc complete

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and fixing in position UPVC aluminium sliding Door : with following specification, Make : Fenista only. (Note : Sholud match the existing pattern in building) System: Luxury Slider (uPVC) Design: Slider Door XiX Colour : Pristine White Slider OF : No Bugscreen No Monsoon Guard Slider Sash : S65 PS1 Slider Threshold : with Threshold/65mm Handle Colour : White Hnd Inner Track : Espag Patio Handle Hnd Outer Track : Espag Patio Handle Mech Joint : No Hurricane Bar : No Bug Mesh : None Glazing : DG INS TGH(6T+15+6T)MM with all required fitting, etc completed

Providing and installation Stainless steel nylon coated grills for safety. Specifications of Invisible Grills Material – Stainless Steel Wire Rope Wire Diameter –2.5mm Finish – Teflon coated wire rope, smooth Usage/Application – windows Design – Vertical & horizontal Water Absorption zero Moisture Content zero Material Grade – SS 316 Position – Exterior Feature – Rust Proof Surface Treatment – Powder-coated channels, Nylon coated wire rope, spacing between two ss wire rope should be 3inch/ 75mm c/c

Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.)