PROVN OF CERTAIN REVENUE AND MINOR WORKS AT OUTSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise all as specified and directed.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over laid screed bed 20 mm thick CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 to 8 mm/ 450X 300X 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and over laid backing coat 10mm thick plaster CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, all as specified and as directed .

M & L for 100 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded granite stone aggregate) in flooring/ hard standing finished even and fair surface complete all as specified and directed.

M&L for hard core of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and as directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

M&L for brickwork with fly-ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc. 1.5 and n.exc 4.00Sqm each all as directed.

Taking down chowkat or frame with shutter ( with out taking off shutters from the frame ) area n.exc 1.50 all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instructions.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F 125mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125mm long aluminium anodised handles, cast type complete all as specified and as directed by Engineer-in-charge.

S&F 100mm butt hinges stainless steel medium weight complete all as specified and as directed by Engineer-in-charge.

S&F 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as directed.

S&F for anodised aluminium powder Coating minimum thickness of powder coating 50 micron to frame for doors, windows, ventilators, Almarah, cup board and partition walls with one or more rebates including joining cleat for fixing . rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F for 5mm thick of Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal.

S&F for 15mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete concealed to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed.

S&F for 20mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair 15mm CP bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair vitreous china squatting pan orissa pattern long of size 580mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as spd and as directed.

S&F in repair 10ltrs capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repair 15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs vitreous china (white) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK) or equivalent make specified in tender.

S&F in repair Vitreous China Wash Hand Basin 550mm x 400mm in size, white, Flat Back or Angle Back Type, making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling and PVC waste pipe and connected Items, complete all as specified and directed. (Make of WHB : PARRYWARE, Model: FLAIR / HINDWARE, Model: MARIO / JAQUAR, Model: CONTINENTAL / CERA, Model: CLAIR/ASIAN PAINTS, Model: SIRIUS) or equivalent make specified in tender. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of brackets, waste coupling and waste pipe)

S&F in repairs Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe incl providing 32mm bore PVC discharge pipe complete all as specified and directed. (Make of Urinal : CERA, Model: CARYS / HINDWARE, Cat No: CORTO / PARRYWARE, Model: Aquaseal N ) or equivalent make specified in tender.

S&F in repair Chromium plated brass Pillar tap, fancy type. with aerator, fixed to wash hand basin, complete all as specified and directed. (Make : JAQUAR, Cat No: CON-021KN / Ess Ess, Cat No: C-201B / PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204/ HINDWARE, Cat No: F330002CP / Cera, Model: OCEAN) or equivalent make specified in tender.

S&F PTMT grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed by Engineer-in-charge.

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in-charge.

Dismantling water tank exc 500 ltr and n exc 1000 ltr and removing store all as specified and directed

S&F for 1000ltr capacity rotational moulded polyethylene water storage tanks (cuboid with closed top) hoisted and fixed in position all as specified in SSR Part l complete all as specified and directed.

S&F in repair for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F for 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specified and directed by Engineer-in-charge.

Supply and fixing 20mm thick pre-polished decorative cement concrete tiles of size 300mmx300mm, as in flooring over 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, as directed by Engineer-in-Charge.

Material & Labour complete removal of surface of walls applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over all as specified and directed.

Material & Labour applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over all as specified and directed.

M/L preparation old surface and applying three coats of white wash on wall complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old surface applying two coats of OBD over one coat of primer all as specified and directed.

M&L for100 mm thick PCC 1:3:6 type C-2 40mm graded aggregate as in plinth protection/ sub base etc complete all as specified and as directed.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches/walls including all fittings and necessary scaffolding upto any height of bldg, all as specified and as directed.

S & F 100 mm bore Cast iron (sand cast) soil, waste and vent pipes in any length with or without ears with cement joints, fixed to walls etc complete including necessary scaffolding upto any height Building all as specified and directed.

S & F for CI bend 100 mm bore with oval access door etc complete including necessary scaffolding upto any height all as specified and directed

S & F for bend / Tee 100 mm bore etc complete including necessary scaffolding up to any height of building all as specified and directed.

S&F for stain less steel classy 6 pin cloth Hanger door wall Hooks rails set for hanging clothes all as specified and directed.

S&F for corner shelf including all fitting complete all as specified and directed.

S&F in repair cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed.

S & F in 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to trenches or in floor etc complete including necessary scaffolding to any height of building all as specified and directed. Make : supreme

Taking down cement or cement lime plaster, any description with over laid bituminous felts on concrete, plaster surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for rendering 20mm thick screed bed on fair faces of roof surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application and over applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre and two coats of aluminium paint on bituminous surface complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for laying pipes etc or for manhole shaft n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil.

Returning, filling in , including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in soft/loose soil all as specified and directed.

Removing excavated soil n exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (salt glazed ware, AC or reinforced concrete ) set in cement mortar including breaking and removal of bedding and haunching etc complete all as directed.

S/F 150 mm bore RCC pipes class NP2 laid & jointed with CM 1:2 with jute, etc complete with collars, complete all as spd and as directed.

M&L concrete bed to drain pipe including packing under and haunching against the side of drain pipe after laid and tested in PCC 1:3:6 type C2 for 150 mm bore pipes complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering all as specified.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not other wise provided for all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm for soft and loose soil all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

S&F for Steel work in tubular trusses in roof trusses (framed), trussed, posts, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for Providing and fixing 20mm thick rubber tile flooring. Each tile should be made with crumb rubber granules (Size- 0.80 to 2mm).The weight of each tile should not be less than 4.5 kg , Density - 0.9g/cc , size:500* 500mm. (Other tests- Grammage, Deformation test, Force reduction ).The rubber tile should be of high quality / Impact absorbing rubber surfaces. This system should be consists by mixing rubber granules with clear ployurethane binder. Tiles should be installed with high quality adhesive. Complete as per manufacture specifications, with and including taking down existing flooring , complete all as specified and directed with the following instructions :- Steps1: Clean the floor, make sure that surface should be smooth. Steps2: Plan a design Steps3: Apply high quality adhesive on back side of rubber tile and floor, then installed it according to the design. Steps4: After complete installation of tiles, floor should be left with the curing time of 2 days before used with strictly board sign near play area. Followed by Do's and Don't as per applicator / Manufacturer instructions. Make: koochie/ Aflex/ Ok play / Body line/ Experio/Replay/ Coasta. Note:- (i) The work shall be carried out through by authorised workmen/applicator of the manufacturer only. (ii) The contractor should submit necessary manufacture test certificate after successful completion of work. (iii) shape, colour and size of tiles as approved by GE/ User .

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil.

Excavating over areas, not exceeding 1.5 M depth for foundation, etc. and getting out in soft/ loose soil.

M&L PCC in foundations, filling and mass-concrete type C2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregate or equivalent make specified in tender.

M&L for 25mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub bases of floors complete all as specified and directed.

M&L for brick work with flyash bricks straight on plan exc 6m mean radius built in CM 1:6 or equivalent make specified in tender.

M & L for rendering 10mm thick on brick wall or concrete surface in cement mortar (1:6) finish even and smooth without using extra cement complete all as specified.

M&L 18-20 mm thick granite slab in floors ,steps of stair cases , pillars of wall , and on vertical surfaces etc and like set and jointed in neat cement slurry and pointed in white cement (1:2) mixed with pigment to match laid over screed bed 15 mm thick in CM 1:4 all as specified and as directed by Engineer-in-Charge.

Plate girder or single stanchions ,Rolled sections as in main and cross beams, built up of beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and directed.

Mild steel bolts dia of neck exc 16 mm but n. exc 20 mm. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed.

M & L for RCC 1:1½:3, type A1 (using 20mm grade stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed. (NOTE: MS reinforcement shall be measured and paid separately).

M&L for RCC type A1 (1:1½:3) using 20 mm graded aggregates in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid separately).

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

M&L for Mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for TMT bars complete all as specified and directed.

Use and waste of from work to sides of concrete for foundations, Fottings , bases of cols and Plinth beams and similar work for rough finished surfaces complete all as specified and directed.

S&F 6 mm thick solid polycarbonate sheet, in roofing / wall cladding , fixed with suitable anodised aluminium profile 2mm thick anodises aluminium H or Ɪ section (H & Ɪ base and cape aluminium profile ) and 2 mm thick anodised aluminium roofing profile for quality connection with supporting structure with appropriate top and bottom gasket enables joining and sealing of two polycarbonate sheet at intermediate and end profile for expansion of sheets and prevention of water penetration from joints , including corner coupler (L shape ) and T joining element without visible self tapping screws complete all as specified and as directed. Note -: All aluminium profile incl gasket etc mentioned above shall be include in quoted rate.

(E/M PORTION) Supply of Hot dip Galvanized mast of mean height of 16 m suitable for mounting 20nos LED Flood Light fittings Symmetrically. Mast will include heard- frame, lantern carriage with required Luminaire arms suitable for mounting luminaires Symmetrically winch with wire ropes( 2 w rope system), lightning spike bolted on head- frame, Junction box, trailing cable 5c x 2.5 sq mm cable-1 nos., carriage supports foundation accessories , required no. of foundation bolts + 50% TP +1 Ap. No. of Section 2; Base and Top Outer dia. in OAF is 360mm and 100mm respectively; Thickness of sections 4/4 mm; Base Platedia. 560x25mm and PCD 460mm.Theslip-stress fit type of joint is provided for sections; Raising/lower speed 3m/min. The lubricant is permanent oil bath of SAE 90/140 type. SS wire rope is AISI 316, 7/19 const. Dia. of rope 6mm and breaking load capacity: 2350kg/rope. The tailing cable is ERP/PCP Sheathed Multi core flexible copper. The power tool is 440V, 50HZ, 1HP/1.5HO Reversible. The mast should comply IS: 875 (Part-III, 1987) for wind loading; BSEN 10025 / IS: 2062 for grades of MS plates. BS ISO 1461/IS 4759 for galvanizing; IS: 800 (1984, Rev 2) for Code of practice for genera lconstruction of steel; TR No. 7(2003) of ILE,UKforspecificationofMast&Foundation;SABS:0225 (1991) for Mast natural frequency calculation; IS: 3459/2266 for stainless steel wire rope; IS: 9968 (Part-I) for trailingcable.3.9IS:325formotor.IS:5135forwelding; IS:1367for foundation accessories Make: Surya

Supplyof BIS Certified make in India 400W LED Floodlight with dimming facilities made of pressure die cast aluminium housing and heat resistant toughened glass and 30Degree Beam angle Lens for optimum light distribution. Rated Supply voltage: 240V,50Hz AC, System Luminous Efficacy> 120 Lumen/Watt, CRI>70,CCT:5700K,PF>0.95,THD<10%.TheLuminaire must have IP66 and IK07 protection. The screws and Connectionsshouldbecorrosionresistantandmustwithstood an applied torque of 8Nm for five times. The Luminaire should have Provision for earthing with Earth contact Resistance < 0.5 Ohm and Leakage Current <1 mA. The InsulationResistanceShall be>2MΩonapplicationof500V DC. The LED Driver is BIS Certified Potted Driver of >85% efficiency with 5KV Internal and 10KV External Surge Protection and Protection from Over Voltage, Short Circuit, Open Circuit and Reverse Polarity. The LED Chip is LM80 Certified OSRAM/ LUMILED smake LED Chip with free all photobiological hazards and a burning hours of L70@50000 Hours. Conforming Standards: IS10322(Pt.5/Sec.5)-2013. IS 16103 (Pt.1& Pt.2):2012, IS 16104:2012, IS 16105:2012, IS 16107(Pt.2/Sec.1):2012,IEC60598, IEC61347-2-13,IEC 62384&62031,LM79.Make:Surya or equivalent make specified in tender.

Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connected with galvanised iron strip of size 32mm x 6mm by means of nuts, bots, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No.3 of MES Schedule Part-I complete including taking down and testing on completion complete all as specified and as directed by the Engineer-in-Charge.

M & L for High Mast Smart Control Panel on FLP for above mast as per SRL standard complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and as directed.

Supply and laying new dry river sand laid in trenches 8cm below the cable and 15cm above the cable and punned to 18cm as cable cushioning and covering complete all as specified and directed by Engr-in-Charge. Note:- Punned quantity will be measured paid at this item.

M&L bricks with sub class 'B' locally available laid in trenches above sand cushioning for cable protection complete all as specified and as directed.

Supply, lay, connect and commission LT underground cable XLPE of size10 sqmm 4 core insulated screened PVC bedded galvanised steel strip armoured heavy duty with multi stranded aluminium conductor 1100 volts grade (ISI) marked laid in trenches, ducts, pipes or fixed on pole etc.complete all as specified and as directed.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 2.5 sq mm ,3 core, 1100 Volts grade complete all as specified and as directed.

Supply and fixing LED wall lights fitting 1x 15 W, 220V, environmental friendly, new generation, decorative IP 66 LED UP-down Luminaire with wall surface mounting using COB LED as light source connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Havells CAT Part CLIOLL15WLED730PSYMTOTUG / crompton/Philips or equivalent make specified in tender.

Supply and fixing LED spike lights fitting 1x 9 W, 220V, environmental friendly, new generation, decorative IP 66 LED spike light Luminaire with wall surface mounting using COB LED as light source connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Havells CAT Part LYCUSSPS9WLED730PSYMBOTG / Crompton/ Philips. or equivalent make specified in tender.

Supply and fixing LED Monochromatic buried uplighter ideal for up lighting landscape, facades, columns & features with multiple optics and saturated tone of white 2W, environmental friendly, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: ADORN MINI / crompton/Philips. Or equivalent make specified in tender.

S & F Sheet metal enclosure for MCB DB double door 240V single pole & Neutral 4 way with common bus bar. complete all as specified and as directed.

S & F MCB 'C' curve single pole neutral , 32 Amps with breaking capacity 10kA,complete all as specified and as directed.

S & F MCB 'C' series single pole 5 to 32 Amps, breaking capacity 10KA. complete all as specified and as directed.

Supply and fixing in repair LED High Bay beam light fittings of 150 Watt with LED lamp's & driver and made of pressure die-cast aluminium housing, heat resistant, IP IP 66 road way luminaries with UV stabilized toughen glass cover & high power LED's as light source with 150 Lumen per watt and electronic driver with efficiency > 85% , IK-07, THD<10% SPD>5 KV PF>0.95. The light fitting shall be fixed on wall/pole/ceiling with and including MS FLAT plate( as per manufacturers recommendation) bracket with MS flat iron clamp complete all as specified and as directed. Make:- Surya Cat No SLE RHB 150 W SIRIUS-N or equivalent model and make as specified in tender.

M & L for point wiring with 4 sqmm (Nominal Area) FRLS PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade for 3 Pin socket outlet 15 Amps on independent board with PVC conduit (ISI Marked) medium duty not less than 20mm dia with accessories such as elbow, tees, internal & external bend etc. of suitable size including continuous earth wire FRLS PVC insulated 4 Sq mm copper multi stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified. Note : 1) Wiring Color code i.e. Red for Phase, Black for neutral and Green for earth shall be maintained. 2) Necessary chase cutting for conduits if requires, shall be measured & paid separately under respective items in this schedule.

Supply and fixing of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed.

Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC casing capping of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standard copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspense deed by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular 4 sqmm : Note. conduits required for wires are included in the rates.

Material and labour for point wiring for the followings with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and capping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick including making good all disturbed surfaces to match the existing complete all as specified and directed as below :- (a) One light/fan point controlled by one, one way switch.

All as per item No 114 but one 3 Pin 5 Amps socket out let point on independent board.

All as per item No 114 but one 3 Pin 5 Amps socket out let point on same board alongwith other suitable switches.

All as per item No 114 here-in-before but using 2.5 sqmm PVC FRLS insulated copper conductor wire for connecting 15A socket on independent board complete all as specified/directed.

Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specified/directed.

Supply and fixing of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed.

Supply & fixing of socket outlet 2 in 1,3 pin 5 Amps 240 Volts flush type (non shuttered) complete all as specified / directed.

Supply and fixing of switch socket out let combination multipurpose 3 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed.

Supply and fixing of ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed.

Supply and fixing of LED tube light fittings 1x20 W, 220 Volt, AC decorative box type with driver ,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in repair of MCB SPN DB 8 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. Make : Legrand/Schneider/Havells.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.

S&F for 32 mm dia GI tubing light grade bracket over all 1.2 mtr length with cutting as required and bend to shape with flat iron clamp of size 32x6 mm, 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles/bldgs for security complete all as specified and directed. Make: Nezone/Surya/Jindal poles.

Supply and fixing of LED street light fittings 35 W,230 volt AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed.

M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, (FRLS) copper cable 4 sqmm stranded conductor and drawing through and including rigid PVC non metallic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 4 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. (ii) chase cutting if required shall be measured and paid separately under relevant items in this schedule.

M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metallic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. (ii) chase cutting if required shall be measured and paid separately under relevant items in this schedule.

M&L for cutting chases for concealed conduit wiring and making good, cutting not exc 10 cm girth complete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

JOY-EN-JOY (BID ID -3082824)

MS JYOTI INDUSTRIES (BID ID -3080873)

MODERN AGENCY (BID ID -3084297)

MARUTI ENTERPRISES (BID ID -3080568)

M/S SRINIVASA CONSTRUCTION (BID ID -3080983)

M/S L.R.ENTERPRISES (BID ID -3080916)

M A ENTERPRISES (BID ID -3086722)

JAY MA TARA TRADERS (BID ID -3084741)