Renovation and Painting of Sr. Executive Field Hostel at Dam Complex at Sarthali for Sewa-II Power Station, J and K (CW-440)

Amount

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead: 1:4:8 or leaner mix

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement: 4 fine sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 1.00mm thick with zinc coating not less than 27 5gm/m2

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement@ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes prepartation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diameter

Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5* 110 mm bend

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Nallah

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm

Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles

Fixing glazed/ ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS: 15477, using 5kg, adhesive per sqm of tile area, in average 3mm thickness

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size.

Providing and fixing soil, waste and vent pipes : 100 mm dia. Sand cast iron S&S pipe as per IS: 1729

Providing and fixing soil, waste and vent pipes : 75 mm diameter Sand cast iron S&S pipe as per IS: 1729

Providing and fixing plain bend of required degree: 100 mm dia. Sand cast iron S&S as per IS:3989

Providing and fixing plain bend of required degree: 75 mm dia. Sand cast iron S&S as per IS:3989

Providing lead caulked joints to sand cast iron centrifugally cast (spun) iron pipes and fittings of diameter: 100 mm.

Providing lead caulked joints to sand cast iron centrifugally cast (spun) iron pipes and fittings of diameter: 75 mm.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 7 5 mm outlet. Sand cast iron S&S as per IS:3989

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked black solid plastic seat and lid, with white vitreous china flushing cistern & C.P. flush bend

Extra for using coloured pedestal type W. C Pan (European type) with low level cistern of same colour instead of white vitreous china W.C. pan and cistern.

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back, or the reception of pipes and fittings.

Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C. Waste fittings complete: Flexible Pipe: 32mm dia.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length. 15 mm nominal bore

Providing and fixing Polyethelene-Aiuminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS:15450 U.V. stablised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) eg. Elbows, tees, reducers, couplers and connectors etc. with clamps at one metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge. (Concealed work including cutting chases and making good the wall etc.) 1216 (16mm 00) pipe

Providing and fixing Polyethelene-Aiuminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS:15450 U.V. stablised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) eg. Elbows, tees, reducers, couplers and connectors etc. with clamps at one metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge. (Concealed work including cutting chases and making good the wall etc.) 1620 (20mm OD) pipe

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931. 15 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing toilet paper holder. C.P. Brass

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 20 mm nominal bore

Providing and fixing brass stop cock of approved quality. 20 mm nominal bore

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/1 Osqm over and including base Coat of water proofing cement paint applied @ 2.20kg/10sqm)

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing 12mm thick plaster of Paris (gypsum anhydrous) ceiling tiles upto a height of 5 mtrs above floor level over wooden frames and rendered smooth with plaster of Paris (frame work to be paid separately).

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade. New work (two or more coats) including a coat of. approved steel primer but excluding a coat of mordant solution.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Renewing glass panes, with Putty & Nails wherever necessary: Float glass panes of thickness 4mm

RAJESHWAR SINGH