Quatation/11/D/D21142

Amount

Supplying,Installation,Testing & Commissioning of simmilar to SSL XL DESK CONSOLE have following specifications •20 + 1 fader, over 40 input Super Analogue TM SSL console •8-built in Variable Harmonic Drive (VHD) preamps •16 dual input mono channels (switchable between main input or DAW return) •4 stereo channels (switchable to mono for tracking) •The legendary Stereo Bus Compressor, with new high-pass filter sidechain •18-slot 500-series rack built-in, accessible from channels or mix busses •In addition to a 500-series rack insert each mono channel also has a standard insert point •4 stereo Mix Buses with their own insert points and access to the 500 rack •One stereo and 2 mono aux sends. Two dedicated stereo return inputs •Direct outputs on every channel, stereo return and mix bus for stem printing •Fully-featured monitoring section with bass management •Foldback A and B with individual talkbacks for headphone mixes •Built in Listen Mic input + classic compressor circuit, with its own direct output •AFL and Solo-In-Place solo modes, with Solo Clear and Solo Safe (Protect) modes •Balanced D-Sub rear panel inputs/outputs & Front panel headphones & Jack sockets •High quality internal PSU

Supplying,Installation,Testing & Commissioning of 4 – 710 UAD MIC PREAMP Featuring four high-end mic/line preamps with a unique tube/solid-state tone blending circuit, as well as classic 1176-style compression on each mic channel, the 4-710d also offers tons of digital I/O to expand your setup.

Supplying,Installation,Testing & Commissioning of SSL FUSION MASTERING PROCESSOR Processor Type: SSL Analog Coloration Number of Channels: Stereo Analog Inputs: 2 x XLR (main L/R), 2 x XLR (insert return) Analog Outputs: 2 x XLR (main L/R), 2 x XLR (insert send) EQ: Low Semi-parametric, High Semi-parametric, High Pass Filter Features: Vintage Drive, Stereo Enhancer, Mid-Side circuit, HF Compressor Rack Spaces: 2U Power Supply: Standard IEC AC cable Weight: 17.6 lbs. Manufacturer Part Number: 729740X2.

Supplying,Installation,Testing & Commissioning of SURROUND SOUND SETUP ASSEMBLY •Simultaneous 16 Channel Analog I/O and 16 Channel AES/EBU I/O •24 Bit / 192 kHz Mastering Quality A/D and D/A Conversion •192 kHz AES/EBU I/O Supporting Single and Dual Wire Modes •Single Rack Space Configuration •Extensive Remote Control Capability via Lynx AES16, IrDA and MIDI •On-board 16 Channel Digital Mixer Provides Flexible I/O Routing •Word clock I/O with Lynx SynchroLock™ Sample Clock Technology •Digital I/O DB-25 connectors follow Yamaha pinout protocol •Analog I/O DB-25 connectors follow Tascam pinout protocol •RoHS compliant

Supplying,Installation,Testing & Commissioning of simmilar to Genelec 1234a/ 1236a / 1238a SAM monitors •Frequency Response : 34 Hz - 20 kHz (± 2 dB) •Low cutoff -6dB 29 Hz •High cutoff -6dB 21 kHz

Supplying,Installation,Testing & Commissioning of simmilar to Genelec 7380 Active Sub Woofer •Frequency Response : 16 Hz - 100 Hz (-6 dB) •Dimensions : H 685 x W 718 x D 492 mm

Supplying,Installation,Testing & Commissioning of simmilar to Genelec 8050 / 8350a Monitors •SPL : 112 dB •Frequency Response : 33 Hz - 22 kHz (-6 dB) •Dimensions : H 452 x W 286 x D 278 mm, with Iso-Pod™

Supplying,Installation,Testing & Commissioning of simmilar to Genelec 8040 / 8340 active monitors •SPL : 105 dB •Frequency Response : 41 Hz - 25 kHz (-6 dB) •Dimensions : H 365 x W 237 x D 223 mm, with Iso-Pod™

Supplying,Installation,Testing & Commissioning of simmilar to GLM CONTROLLER WITH SOFTWARE •Type: Studio monitor calibration and management system •Analog inputs: 1 x 1/8" (reference mic) •Data I/O: 1 x RJ45 (GLM), 1 x RJ45 (terminator) •USB: 1 x Type B •Software: GLM 4 •Compatibility: Genelec 8300 Monitors/7300 Subwoofers •OS requirements: Mac: OS X 10.11, 11.0.1; PC: Windows 10 (64-bit) •Form factor: Desktop •Power supply: USB bus powered

Supplying,Installation,Testing & Commissioning of LED SCREENS having specifications: Resolution: 4K Ultra HD (3840x2160) | Refresh Rate: 60 hertz Connectivity: Wi-Fi (Built-in) | 3 HDMI ports to connect set top box, Blu Ray players, gaming console | 2 USB ports to connect hard drives and other USB devices | eARC | Bluetooth 5.0 | Optical | Ethernet Sound: 20 Watts Output | 2.0 Ch Speaker | AI Sound (Virtual Surround 5.1 up-mix) | Auto Volume Levelling | Bluetooth Surround Ready ,Smart TV Features: WebOS Smart TV | AI ThinQ | Apple Airplay 2 & Homekit | Game Optimizer| Filmmaker Mode | α5 AI Processor 4K Gen6 | HDR 10 |1.5 GB RAM + 8 GB Storage | Unlimited OTT App Support: Netflix, Prime Video, Disney+ Hotstar, Apple TV, Jio Cinema, SonyLIV, Discovery+, Zee5, Voot, MxPlayer, Google Play Movies & TV, YuppTV, Youtube ,Display: 4K Ultra HD LED Display | Slim Design | 4K Upscaler

Supplying,Installation,Testing & Commissioning of 1:4 HDMI SPLITTER Supported Audio: DTS-HD, Dolby-trueHD, DTS, Dolby-AC3, DSD etc. - Support highest rate of 3.4Gbps and TMDS clock can be up to 340Mhz ,- Support 8/10/12 bit deep color ,- Support AWG26 HDMI standard cable: input up to 15 meters, output up to 15 meters, (when the resolution is 4K, input up to 8 meters, output up to 8 meters.) Support one single HDMI source, accessing to multiple HDMI sknks, the source can be DVD player, A/V receiver, set top box and etc.

Supplying,Installation,Testing & Commissioning of THUNDERBOLT TO USB CONVERTER USB 3.0 to Type C USB Adapter USB C Male to USB 3.0 Female Connector, OTG Converter Adapter Compatible with Android Phones, Type C or Thunderbolt 4/3 Devices

Supplying,Installation,Testing & Commissioning of simmilar to Neumann U87 studio microphone having specifications: •Acoustical operating principle:Pressure gradient transducer •Directional Pattern:Omnidirectional, cardioid, figure-8 •Frequency Range:20 Hz ... 20 kHz •Sensitivity at 1 kHz into 1 kohm:20/28/22 mV/Pa ± 1 dB (Omni/cardioid/8) •Rated Impedance:200 ohms •Rated load impedance1: kohms •Equivalent noise level, CCIR:26/23/25 dB (Omni/cardioid/8) •Equivalent noise level, A-weighted:15/12/14 dB-A (Omni/cardioid/8) •Maximum SPL for THD 0.5%" 117 dB (cardioid) •Maximum SPL for THD 0.5% with preattenuation:127 dB •Signal-to-noise ratio, CCIR (re. 94 dB SPL): 68/71/69 dB (Omni/cardioid/8) •Signal-to-noise ratio, A-weighted (re. 94 dB SPL):79/82/80 dB (Omni/cardioid/8) •Maximum output voltage:-6 dBu •Supply voltage : 48 V ± 4 V •Current consumption: 0.8 mA •Matching connector:XLR 3 F •Length:200 mm

Supplying,Installation,Testing & Commissioning of simmilar to Manley Cardioid Reference Microphone having specifications • All-Tube triode design utilizes 12AX7 or 7025EH • -10 dB switchable pad • Frequency response: 10Hz-30KHz • Sensitivity: 17mV/Pa • Noise typically -120dB EIN • Max SPL: 150dB • Output Impedance: 250 Ohms • Weight: 2.25 lbs (mic) • Size: mic body 2" diameter x 9.7" long x 4.5" • Shipping weight: 15 lbs

Supplying,Installation,Testing & Commissioning of simmilar to AKG C214 MATCHED PAIR •Polar Pattern Cardioid •Audio frequency bandwidth 20 - 20000 Hz •Equivalent noise level 13 dB-A •Sensitivity 20 mV/Pa •Signal to Noise 81 dB-A •Preattenuation Pad -20 dB •Bass cut filter 160 Hz •Electrical impedance 200 Ohms •Recommended load impedance 1000 Ohms

Supplying,Installation,Testing & Commissioning of simmilar to AKG C451 MATCHED PAIR •Audio frequency bandwidth: 20 to 20000 Hz •Equivalent noise level: 18 dB-A •Sensitivity: 9 mV/Pa •Signal to Noise: 76 dB-A •Preattenuation Pad: -10, -20 dB •Bass cut filter: 75, 150 Hz •Electrical impedance: 200 Ohms •Recommended load impedance: 1000 Ohms •Polar Patterns: Cardioid

Supplying,Installation,Testing & Commissioning of simmilar to AKG C414 MATCHED PAIR • Audio Frequency bandwidth : 20 to 20000 Hz, Sensitivity : 23 mV/Pa, Equivalent Noise Level : 6 dB-A • Signal to Noise : 88 dB-A, Pre-attenuation Pad : -6,-12,-18 dB, Bass Cut Filter : 160, 80, 40 Hz • Electrical Impedance : 200 Ohms, Recommended Load: 2200 Ohms, Voltage: 44 to 52 V • Current: 4.5 mA, Type: Balanced XLR, Gender: Male, Contacts: 3-pin, Finish dark : gray / gold, Length: 38 mm

Supplying,Installation,Testing & Commissioning of simmilar to SHURE SM58 Type Dynamic (moving coil) •SM58 Frequency Response 50 to 15,000 Hz •Polar Pattern Cardioid •Output Impedance 300 Ω •Sensitivity at 1 kHz, open circuit voltage -56.0 dBV/Pa [1] (1.6 mV) •Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect pin 3 •Weight 0.33 kg (0.72 lb) •Switch : SM58S, SM58SE On/Off Switch •Connector Three-pin professional audio (XLR), male •Housing Enamel-painted die cast metal with spherical steel mesh grille 1 dBV/Pa= 94 dB SPL

Supplying,Installation,Testing & Commissioning of simmilar to SHURE SM 57 having specifications •Type Dynamic Frequency Response 40 to 15,000 Hz •Polar Pattern Cardioid •Sensitivity (at 1,000 Hz Open Circuit Voltage) •Open Circuit Voltage: -56.0 dBV/Pa (1.6 mV) (1 Pa = 94 dB SPL) •Impedance Rated impedance is 150Ω (310Ω actual) for connection to microphone inputs rated low impedance. •Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. •Case Dark gray, enamel-painted, die-cast steel with a polycarbonate grille and a stainless steel screen. •Connector Three-pin professional audio connector (male XLR type) •Net Weight 284 grams (10 oz) •Dimensions 157 mm (6-3/16 in.) L x 32 mm (1-1/4 in.) W at the widest point

Supplying,Installation,Testing & Commissioning of AUDIX DRUM KIT MIC SET DP7 1 x f5 Snare Microphone 3 x f2 Rack and Floor Tom Microphones 1 x f6 Kick Drum Microphone 2 x f9 Overheads Microphones 6 x DCLIP Microphone Clips 4 x DFLEX Microphone Clips 1 x MC1 Microphone Clip

Supplying,Installation,Testing & Commissioning of simmilar to BEHRINGER HEADPHONE AMP 8 PORT 8 totally independent stereo high-power amplifier sections in one rack space 2 stereo Main inputs for two independent mixes, accessible from all 8 output channels 8 independent Direct inputs provide up to 8 individual stereo mixes Output level control and accurate 8-digit LED output meter per channel Mono/stereo switch per channel for more flexibility 1 front and 1 rear TRS phones connector per channel Direct input connector on each channel for easy connection of any sound source Parallel Main outputs allow cascading of several headphones amplifiers "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy savings

Supplying,Installation,Testing & Commissioning of simmilar to SENHEISSER STEREO HEADPHONES •Transducer Principle: Dynamic, open •Frequency Response: 10Hz - 41kHz •Frequency Characteristic: Diffuse field equalized •Nominal Impedance: 300 Ohms •Sound pressure Level : 103dB (1V RMS) (at 1kHz) •Long-Term Input Power: Max. 500mW as per EN 60-268-7 •THD: ≤0.05-percent (1kHz, 100dB) •Contact Pressure: Approx. 2.5N •Ear Coupling: Circum-aural •Connector: 1/4'' (6.3mm) stereo jack plug •Adaptor: 1/4'' (6.3mm) stereo jack plug to 3.5mm stereo mini-jack plug •Cable: Oxygen-free copper cable (OFC), 3m

Supplying,Installation,Testing & Commissioning of simmilar to BEYER DYNAMIC DT 770 250 OHMS • Beyer Dynamic DT 770 PRO 250 Ohms Studio Headphones • INCLUDED IN THE BOX: DT 770 PRO 250 Ohms Studio Headphones|Coiled Cable with 1/4" Adapter| Drawstring Bag • BUNDLE INCLUDES: Beyer Dynamic DT 770 PRO 250 Ohms Studio Headphones |

Supplying,Installation,Testing & Commissioning of Pop Filter • Double Layered Screen Pop Filters: The first screen blocks air blasts as any pop filter normally would • The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings.

Supplying,Installation of Full size 6 ft Mic Stand

Supplying,Installationof Half size 3 ft Mic Stand

Supplying,Installation of Boom Stand 8 ft Mic Stand

Supplying,Installation of Notation Stands foldable Mic Stand

Supplying,Installation,Termination,Testing & Commissioning of TS - XLR-M Unbalanced

Supplying,Installation,Termination,Testing & Commissioning of TRS-XLR-F Balanced)

Supplying,Installation,Termination,Testing & Commissioning of TS - XLR-M Unbalanced

Supplying,Installation,Termination,Testing & Commissioning of EP TO XLR-M (Stereo)

Supplying,Installation,Termination,Testing & Commissioning of . XLR STUDIO ROUTING FOR SURROUND MIXING SETUP

Supplying,Installation,Testing & Commissioning of 12 MIC + 4 HEADPHONES OUT WALL PANELS IN CHROMA AND IN AUDIO DUBBING ROOM.

Supplying,Installation,Testing & Commissioning of 4 PORT SPIKES GUARDS

Supplying,Installation,Testing & Commissioning of 4k SDI Cable

Supplying,Installation,Testing & Commissioning of 4k HDMI Cable

Supplying,Installation,Testing & Commissioning of simmilar to BLACKMAGIC ATEM TELEVISION STUDIO PRO 4K PRODUCTION SWITCHER 8 CHANNEL 8 standards converted SDI inputs, aux outputs, 4 chroma keyers, 2 downstream keyers, Super Source, 2 media players and lots of transitions! Plus it includes a whole television studio of features such as hardware streaming, recording, audio mixer, talkback, multi-view and optional internal network shared storage. There's even an ISO model that records all 8 inputs for editing.

Supplying,Installation,Testing & Commissioning of simmilar to Lili Put Broadcast Monitor having specifications 5.6 4K UHD Monitor | 6U Carry-on/ Rackable V Mount 3D-LUT 3840x2160 4x4K HDMI 3G-SDI in & Out Broadcast LED Director Monitor with HDR | Black, High resolution of 1920x1200 pixels, High contrast: 1000:1 , Support 4K HDMI input with loop-through output , Support 3G-SDI input with loop-through output,Support VGA input, Adopt the unique Glass+Glass technology, F1&F2 user-definable buttons to custom auxiliary functions as shortcut , Individual adjustments of Brightness, Contrast, Brightness, SaturationSharpness and Color Temp, etc., Integrated Peaking, False Color, Exposrue, Histogram, Level meter, Marker,Scan, Check Field, Zoom, Freeze, Image Flip functions,Includes battery plates for Sony F-970, Equipped with 75mm VESA holes, Compatible with sunshade, that can be used under sunlight, Built-in high level components to support 7 to 24V power supply voltage

Supplying,Installation,Testing & Commissioning of simmilar to YAMAH MG12XUK Audio Mixer 12 Channel having specifications 12-channel mixing console,High-grade effects: SPX with 24 programs 24-bit / 192kHz 2in / 2out USB Audio functions,Metal chassis Dimensions(W/H/D): 315 mm x 91 mm x 297 mm,Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter. +48V phantom power

Supplying,Installation,Testing & Commissioning of LED TV • Display: 32" QHD (2560 x 1440 ) Wide Angle VA Panel | sRGB 95% | HDR 10 | Color Calibrated • Gaming Features: 1ms MBR, 165 Hz, • Connectivity: Display Port , HDMI x 2, Headphone Out • Stand: Height Adjust, Pivot , Title | 100 x 100 VESA Mount Compatible • Dynamic Action Sync, Black Stabilizer, Cross Hair

Supplying,Installation of Tv Stand EXCELLENT DURABILITY: Mobile TV Stand on Wheels is made from solid metal with a powder-coated finish. The frame is strong and heavy duty and can support most of 32" to 70" LCD LED flat screens plasma TVs monitor weight up to 80 KGs with VESA from 100 x 100mm to 600 x 400mm.

Supplying,Installation,Testing & Commissioning of simmilar to JBL SPEAKERS SYSTEM JBL Cinema SB271, Dolby Digital Soundbar with Wireless Subwoofer for Extra Deep Bass, 2.1 Channel Home Theatre with Remote, HDMI ARC, Bluetooth & Optical Connectivity (220W)

Supplying,Installation,Testing & Commissioning of Video Splitter Ultra HD 1 x 4 Powered HDM Splitter 4K @ 60Hz HDMI 2.0 HDCP2.2 with EDID Control – 1 Source onto 4 Displays

Supplying,Installation,Testing & Commissioning of Sennheiser Lepel Mic Omni-Directional Professional Wireless Lavalier Microphone System , Upto 100 meters (330 feet) and upto 8 hours of operation time

Supplying,Installation,Testing & Commissioning of 21 INCHES Tele Prompter having specifications •21" LCD Monitor •70/30 Beamsplitter Glass •Rod-Support Rig with Camera Riser •Sliding Quick Release Camera Plate •Includes Forprompt Software for Windows •Compatible with Other Software Solutions

Supplying,Installation,Testing & Commissioning of SENHEISSER STEREO HEADPHONES Uncompromising Fidelity When it comes to studio headphones, nothing matters more than accuracy. The K361-BT features amazing sensitivity and frequency response, largest-in-class 50 mm drivers and pure oxygen-free copper voice coils for the utmost acoustic precision, delivering authoritative bass, articulate midrange and pristine highs with detail and clarity.

Supplying,Installation,Testing & Commissioning of PA System Bluetooth Speaker 2 mics 100W Multi-Connectivity Bluetooth, HDMI ARC, Optical, USB, AUX in-Out Speaker with Dolby Audio, Wireless UHF MIC, and Karaoke, TWS, LED Lights, and Recording Function

Supplying,Installation,Testing & Commissioning of Talk Back Headphones 6 WITH PACK 1 x Master Headset •6 x Slave Headsets •1 x Wireless Hub •7 x Batteries, 5 x Chargers, 1 x Case •Wireless Range up to 1200′ •TDD Duplex Operation

Supplying,Installation,Testing & Commissioning of LED SOFT PANEL 100W BC • LED SMD Lamp Source • CCT 3200K/5600K/Bicolor 224 x 0.5W Surface Mounted LED’s • Colour Rendering Index 98+ • Tel. Lighting Consistency Index 97+ • R9 Value 95+ • 50,000 Hours Burning life

Supplying,Installation,Testing & Commissioning of LED FRESNEL SPOT 100W BC • LED COB Based Source • CCT 3200K/5600K/Bicolor 1 x 100W Chip on Board • Colour Rendering Index 97+ • Tel. Lighting Consistency Index 97+ • R9 Value 94+ • 50,000 Hours Burning life

Supplying,Installationg of Light Stands Heavy Duty Light Stand, Aluminium Photography Studio Light Stand, Adjustable Height with Maximum 86.6"/2.2m,for Photography/Studio/Youtube Video/Live Streaming 2 Pack

Supplying,Installation,Testing & Commissioning of TRIPOD Aluminum Tripod (133CM), Universal Lightweight Tripod with Mobile Phone Holder Mount & Carry Bag for All Smart Phones, Gopro, Cameras

Supplying,Installation,Testing & Commissioning of simmilar to SONY ALPHA A7SIV CAMERA • Newly developed 12.1-megapixel2 back-illuminated Exmoor RTM CMOS image sensor • Newly developed BIONZ XR image processing engine with up to 8x the processing performance • Movie-making with 4K 120p28, 10-bit 4:2:2 recording capability; Fast Hybrid AF with 759 phase-detection AF points and enhanced Real-time Eye AF including LENSE 24 – 70 & LENSE 70 - 200

Supplying,Installationof CHROMA GREEN CLOTH (165 GSM) made up of Rugged Muslin should Spot Washable Looped Hem for Crossbar & Impact Chroma Sheet Background - throw up a quick background for a headshot. This background also features a hemmed loop, which allows it to be used on a crossbar.chroma colors should great for any kind of tv or video production.

Supplying,Installation,Testing & Commissioning of APPLE STUDIO ULTRA ( Audio ) 60-core CPU with 16 performance cores and 8 efficiency cores , Hardware-accelerated H.264, HEVC, ProRes and Pro Res RAW , Two video decode engines , Four video encode engines , Four Pro Res encode and decode engines , 128GB RAM ,1TB SSD, Thunderbolt 4 (up to 40 Gbps) , DisplayPort , USB 4 (up to 40 Gbps) , USB 3.1 Gen 2 (up to 10 Gbps) , Two USB-A ports (up to 5 Gbps) ,HDMI port , 10Gb Ethernet , 3.5 mm headphone jack

Supplying,Installation,Testing & Commissioning of APPLE STUDIO ULTRA ( Video Edit ) 24-core CPU with 16 performance cores and 8 efficiency cores , Hardware-accelerated H.264, HEVC, ProRes and Pro Res RAW , Two video decode engines , Four video encode engines , Four Pro Res encode and decode engines , 64GB RAM ,1TB SSD, Thunderbolt 4 (up to 40 Gbps) , DisplayPort , USB 4 (up to 40 Gbps) , USB 3.1 Gen 2 (up to 10 Gbps) , Two USB-A ports (up to 5 Gbps) ,HDMI port , 10Gb Ethernet , 3.5 mm headphone jack

Supplying,Installation,Testing & Commissioning of MEMORY CARDS simmilar to Sandisk 64 GB

Supplying,Installation,Testing & Commissioning of CARD READER 4 in 1 Lightning to USB, SD TF Card Reader Adapter with Charging Port for iPhone, iPad, Dual Card Slot, Fast Charging & USB 3.0 OTG Connector Supports USB Flash Drive, Camera and More

Supplying,Installation,Testing & Commissioning of 4 TB SSD STORAGE HDD LaCie Rugged SSD Pro 1TB Solid State Drive - USB-C Thunderbolt 3, Drop Shock Dust Water Resistant, for Mac and PC Computer Desktop Laptop

Supplying,Installation,Testing & Commissioning of SERVER SYSTEM WITH NETWORKING PowerEdge R260 SMB, Near-Edge, ROBO Up to 4 x DDR5 DIMMS One Intel® Xeon® E-2400 processor Up to 2 x 3.5" and up to 6 x 2.5' SAS/SATA Drives

Supplying,Installation,Testing & Commissioning of software PRO TOOLS ULTIMATE EDITION 2023

Supplying,Installation,Testing & Commissioning of software COMPLETE WAVES BUNDLE 2024

Supplying,Installation,Testing & Commissioning of software Slate + API + Izotope & RX Bundle Processors 2024

Supplying,Installation,Testing & Commissioning of software ADOBE SUIT 2024

Supplying,Installation,Testing & Commissioning of Software Final Cut Pro for Mac - Apple

Supplying,Installation,Testing & Commissioning of Software Da Vinci Suit of latest version

Supplying,Installation,Testing & Commissioning of Software AVID latest version

Supplying,Installation of Anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying at the points of contact with the adjoining masonry by drilling 6m. dia holes at a downward angle of about 45 degree at the junction of woodwork and masonry and squirting chemical emulsion into these holes at the rate of half litre per hole. The entire work is to be carried out as per specification of Code I.S.-6313 (Part-III)-1981. The shutters are to be sprayed with emulsion. on both sides. All wooden fixtures like almirahs, racks etc. are also to be throughly sprayed with chemical emulsion as per specifications and drawings and as directed by Engineer-in-Charge.

Supplying & installation of wall paneling made of pinewood E1 grade fiberboard, melamine/veneer laminated finish, groove perforated L32-2 - (2mm grooves @ 32mm centers), back lined with Soundtexblack acoustical fleece, tongue-groove edge for a seamless look, 5-test fire retardant grade/ Non FR, Acoustics – NRC 0.77 (For E300* Mounting), size 128x2440x16mm, volume density of base board 800Kg/m3, 10.5Kgs/m2 (L32), installed by using Strut framework system. Slats to be backed with Synthetic PF 10x25 adhered to wall with stick .The Paneling shall be finished as per the drawings and to the satisfaction of the Engineer in Charge. All the support system shall be as per the Approved make list and the suspension system shall be got approved before starting installation at site. Providingand fixing 12mm thick panelling o rpanelling and glazing inpanelled or panelled and glazed shutters for doors,windows and clerestory windows (areaofopening for panel inserts excluding portion inside grooves or rebates to bemeasured).Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick as per specifications and drawings and as directed by Engineer-in-Charge.

Supplying,Installation 12mm thick panelling or panelling and glazing inpanelled or panelled and glazed shutters for doors,windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick s per specifications and drawings and as directed by Engineer-in-Charge.

Supplying,Installation false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of raw plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with Moisture resistant gypsum board. Gypsum moisture resistant board.

Supplying,Installation of ARMSTRONGCEILING:-CEILING PLANKSOUR5"X84" INWOODHAVEN CEILING PLANKS ARE MADE OF MDF(MEDIUMDENSITY FIBERBOARD) CEILINGFINISHES:-MODELNO.1260KNOTTYPINE-Providing and fixing false ceiling (ARMSTRONG MAKE) at all height with prelaminated 4mm to 5mm including providing and fixing of frame work made of special sections, powerpressed from M.S.sheets and galvanized with zinc coating of 600gms/sqm as per IS:277 and consistingof anglecleats of size 25mm widex15mm thick with flanges of 22mm and 37mm,at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 40mm long with 6mm dia bolts other flange of cleat fixed to the anglehangers of 25X25X50mm of required length , andother end of angle hanger being fixed with nuts and bolts to G.I.channels 45X15X0.9mm running at the spacing of 1200mm centre to centre to which the ceilingsection 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm,at 450 mm centre to centre,shall be fixed inadirection perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm dia x 230mm long G.I.wireat every junction, including fixing the plyboard with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mmand 30mm long,the perimeter of ceilingfixed to wall/partition with the help of rawl plugs at 450mm centre,with 25mm long dry wall screws@230mminterval, including fixing of 12mm plyboard sheet to ceiling section and perimeter channels with the help of dry walls crews of size 3.5x25mm at 230mm interval including jointing and finishing to a flush finish of tapered and square edges of plyboard including the cost of making openings for light fittings, grills, diffusers cutouts made with frameof perimeter channels suitably fixed all complete as per drawing, specifications and direction of the Engineer-in-charge.

Supplying,Installation of Royal Touche Wooden Floors (Pavimento) o rEquivalent, single layer homogeneous (solid wooden flooring) of suitable thickness 8mm to 10mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, Maid Frr, Non-Fading, Abrasion Resistant (AC4& AC5 for all the floors),Adhesive Freelaying & dismantling system for easy installation & moving whenever required.Backingunder layer Harmerson min 2 mm thickness shall provide as soundabsorbent and moisture protection layer of specified design,colour and pattern, all bonded together under high temperatureandpressurewitheco-friendly resins specified by the manufacturer. The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area.Make:- Royal Touche, model no. MOROCCAN-HARDWOOD-CODE: SAL-848, SIZE: 1285mmX158mmX8/10mm, DARK JAPANESE SEN-CODE:- 804, SIZE: 1286mmX194mmX8/10mmORSAMPLEAPPROVEDBYARCHITECTS

Supplying,Installation Fully Perforated Gypsum Plaster Board having approx.15% perforated area with perforation size and pattern as approvedby theEngineer-in-chargeandas per manufacturer'sspecification,with all 4side tapered and backedby acoustical tissue with NRC value not less than 0.60.

Supplying,Installation of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runner with suitably spaced joint to get required length and of size 24x32 mm made from 0.30 mm thick (minimum) sheet spaced joints to get required length and of size 24x26 mm made of 0.30 mm thick (minimum)sheet spaced at 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.4 mm and laying false ceiling tiles of approved Perforation in the grid including, wherever required, cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors, etc. Main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be prepainted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge.

Supplying,Installation of acoustical wall panelling wood finish Slats made out of MDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), backlined with black acoustical fleece, tongue-groove edge for a seamless look, FR grade, of lineal dimension size 128mm x 2440mm x 16mm thick having density 1000Kg /m3, weight 12.8Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically / horizontally at every 600mm centers. Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts both ways. Make. Armstrong / Gyptek / Calsi.

Supplying,Installation of upto required height WOODEN PANELLING on existing walls / Door frame etc. with under framing of 40 mm x 50 mm(approx.) Aluminium Frame placed @ 600 mm c/c both ways or as required as per site condition & covered with 12mm thick MR Plywood screwed over the frame( treated fortermite painted with fire retardant paint).All finished faces shall be provided with laminate (1.0 mm thick) of approved shade & quality. The top moulding shall be 50mm x 50mm first quality T.W. as per architects drawings. The panelling shall have provision for power cabling at sill level (75 cm from FFL) and communication cabling at skirting level, by providing T.W. removable section 19mmx150 mm as per architects detailed drawings. The rates shall include all necessary hardware, material, lobour wastage etc. complete. NOTE:- Design and details shall be as per directed by Engg. InCharge Note:- Adhesive material used as Approved company. And Laminate shade approved by as per directed by Engg. In Charge

Supplying,Installation of Thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Make:- Neo-Thermal Insulation(India) Pvt. Ltd., Aerolam, Patidar or Equivalent. as per specifications and drawings and as directed by Engineer-in-Charge.

Supplying,Installation of Melamine polishing on Doors/Windows by preparing the surface applying putty base\course.Prepare the surface smooth by sand papering and thenapplying melamine polishwithair compressor.Two or more coats on new works including a coat of wood filler. Including materials, Labour etc as per specifications and drawings and as directed by Engineer-in-Charge.

Supplying,Installation of in two or more coats Birla or JK make wall care putty on outer/inner surface including sand papering for making the uniform and smooth surface for applying plastic emulsion or any other paints as per requirements, with all cost of materials, labours and scaffolding etc. in all position complete.

Providing and Supplying plastic emulsion paint on wall/ceiling for first quality sheen finish of approved shade and quality in 2 coats, including labour, safety equipments, wastage etc. All work complete in satisfactory upto architects. Make:- Asian, Berger or equivalent per specifications and drawings and as directed by Engineer-in-Charge.

Providing and Supplying VineerWallPanelling:-Providing&Fixingwall panellingconsistingof 4mmthick veneer ply fixedover 12/18mmthickCommercial PlyFixedbyFevicol SHwith Hardware etc. Complete per specifications and drawings and as directed by Engineer-in-Charge.

Providing & Fixing teak wood door frame of size 150mmx75mmfor Acousticaldoor with 85mm Pattam with Dtype Acoustical doorgasket to stop sound leakage the door frame to be fix on existing wall by dest Fastener Size 150mmx10mm complete per specifications and drawings and as directed by Engineer-in-Charge.

Providing & Fixing Acoustic Sound Proof Door :-Providing and fixing 85mm thick puff Acoustic Door consisting teak wood door frame section of size 100mm x 50mm and middle section size is 125mm x 50mm. 9mm thick commercial ply to be fixed on both size at teak wooden frame with 50mm thickres in bonded rockwool pad conforming to IS8193 of 100kg density to be fill in gap at wooden frame. For sound absorption 2mm thick sound damping layer (massloadvinyl)to be fix on inside 6mm calcium silicate board to be fixed inside thedoor to reducesound transportation for acoustic insulation.4mm thick teak veneer to be fixed as askinon both sides finished. all edges of the panel door to be cover with 85mm wide x 10mm thick teak wood batterns-Dtype rubbergasket to be fixed teakwood battern for stop noise leakage complete door as performanceasa top quality sound proof acoustic door.The door to be fixed on existing door frame with heavyduty S S hinger at size 150mmx50mmx4mm with ss s crews. All hardware i.e. door handles,door stopper and door closeretchave to betaken separately, not to be included in this item. simmilar to make TechnoAcoustics, Ecophon Sound Absorber(Saint-Gogain) or Equivalent per specifications and drawings and as directed by Engineer-in-Charge.

Providing and fixing in Flooring and Steps - Woven vinyl carpet floorings of vinyl woven series with roll dimensions of 1.8/2mtr meters width and length of 20 meters or Tiles size as per company standard should be approved by architect. 2.50-2.80 mm thickness to laid on hard, levelled, smooth and moisture free sub floor. Woven Vinyl flooring should have traffic classification 33 and weight of 2.7-3.5 kg/m2. Flooring should have caster chair EN-985 tested with color fastness of more than 6. It should be ASTME662 qualified on Smoke density test. Product must be fire rating of the product should be Bfl-S1. Any Joints in flooring rolls should be sealed with cold welding. This work will be inclusive of all Labour, Raw Material, Hardware, adhesive etc. complete. Carpet will be provided as per approved shade and colour in Approved Makes- Vibrant Floors/Armstrong Flooring/MAC ,as per the satisfaction of the Architect and Engg. Incharge

Providing & Fixing USG BORAL Concealed Ceiling Frame Work. as per the designs & specifications. As per drawing & as per instruction of site incharge. Section Size. 1) 51x26x26x3660x0.50mm - USG Boral ST-50 Ceiling Section 2) 45x15x15x3660x0.90mm - USG Boral ST-50 Intermediate Channel 3) 25mm X 6mm -USG Boral Drywall Screws 4) USG Boral ST-50 Wire connecting clip 5) Pentagon Nylon Sleeve and steel Screws per specifications and drawings and as directed by Engineer-in-Charge.

Supplying,Installation of WALL PAPER -Providing & fixing Wall paper (Heavy Vinyl Coated) of reputed brand on existing smooth surface of Wall/Panelling i/c applying of adhesive & Powder, fixing on wall and matching the Joints /Design pattern as per the approval of the Engineer In charge complete and nothing will be paid extra for execution of the item .This job includes all Leads, lifts for all floor, Material & labour complete and nothing will be paid extra for execution of the item. All work is to be executed as per the design approval and directions per specifications and drawings and as directed by Engineer-in-Charge.

Supplying,Installation of frameless glass door (12mm thick. toughened glass) in openings (Bi-Parting Door openings/Door openings in Glass Partitions / Aluminium Glass Composite Partitions) with 12mm toughened class with necessary patch fittings includes BTS 65 Floor spring. Top Patch, Bottom Patch, Lock, Pivot , PT 30, PT 60 & H Type Handle (site-300mm to 600mm long as er design) Make-Donna or Hettich or approved make and as per the directions of the Engineer Incharge ( includes Etching Film(50 Microns) work on !Ock. of total glass area as per design). This job includes all Leads. Lifts for all floor. Material & labour complete and nothing will he paid extra for execution of the item. All work is to be executed per specifications and drawings and as directed by Engineer-in-Charge.

Supplying,Installation of SOFA FOR VISITORS (3+1+1) ,Providing & Setting onsite sofaset as per design.detail set consisting of fully upholsteredroundboister types back andseat in125mm(100mm rubber+25mm foam cushion with coil springs and blockboard / hard wood frame of approved quality size & colour, upholstered in approved quality of textured upholsterymaterial, armrest forming supports for therestand backin angula rshape madeout of boxing18mmMRPlyboardof approvedmake.Thebottomopening shall be fixed with galvanised mesh to avoid rates etc.T.W. legsor PVC stoppers toavoiddirectcotactof the upholstery with floor,with neces sary paint,polish, lipping, Patti, piping, buttonsetc. asper the Engineer approval. Theseatwill be\ measured as 533mm/seat.as directed by Engineer-in-Charge.

Providing & Supplying Engineer Office Chair,High Back Mesh Ergonomic Home Office Desk Chair with 3 Years Warranty, Adjustable Armrests,Adjustable Lumbar Support,Tilt Lock Mechanism Seat frame material - Nylon | Internal Seat Material: Wood |Cushioned Seat Thickness : 3.9 INCHES| Filled with - PU | Swivel: 360º swivel | Seat Cover: Mesh | Color: Grey | Size: High Back | Tilt Lock | Gas-lift: Class 4 | Base: Heavy Duty Metal Base | Castors: Nylon Dual Wheels | Maximum Weight Capacity: Up to 120 Kgs | Height Adjustment :45"-48" INCHES | Seat Width : 19" INCHES| Seat Depth : 19 INCHES| Seat Height : 17.5 - 20.5" INCHES| Back Height : 28" INCHES| color and design as directed by Engineer-in-Charge.

Providing & Supplying Mid Back Office Chair for Work from Home/Study Chair Height Adjustable Revolving Chair with Tilt Lock [Heavy Duty Nylon Base, Black]DIMENSIONS :- Length (18.5 inches), Width (18.5 inches), Seating Height (18 to 24 inches), Overall Height (36 inches),Passed stability testing with a load of 100 kg on seat and backrest to avoid tip-over. Passed seat and back rest durability test with a load of 100 Kg and 32 Kg respectively for 1,00,000 cycles color and design as directed by Engineer-in-Charge.

Providing & Supplying unbreakable Arm Plastic Chair Dimensions: 12.99 x 11.81 x13.77 inches Material Type: Polypropylene color and design as directed by Engineer-in-Charge.

Providing & Supplying Computer Table for Home - Study Table for Students, Adults Work Table for Home Office with Keyboard Tray, Adjustable Storage Space & Wire Holes (Oak Red & White - L 103 x B 43 x H 75 cm) for Video Edit color and design as directed by Engineer-in-Charge.

Gentech Engineering Services

Comtech Telsolution Pvt Ltd