Supply, Installation, Testing and Commissioning(SITC) of Electrical Installation Works in Convention Centre , ITPO, Bharat Mandapam, New Delhi.

Amount

Electrical Works

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.

3X4 sq. mm

3X6 sq.mm

3X2.5 sq.mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recessincluding painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps Switch

3 pin 5/6 amp Socket Outlet

15/16 amps Switch

6 pin 15/16 amp Socket Outlet

Supplying and fixing following size/modules, GI box along with modular base and cover plate for modular switches in recess etc. as required.

3 Module (100 mm x 75 mm)

6 module(200mmX75mm)

Supply and fixing following rating,four pole, (three phase and neutral), 415Vs, residual current circuit breaker(RCCB), having current sensitivity 30 milli amperes in the existing MCB DB complete with connections, testing and commsioning etc. as required.

63A, 4 pole RCCB, 30mA

Supplying and fixing 5 amps to 32 amps rating, 240/415volts, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Supplying and fixing following rating, Four pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc., as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV garde of following size on cable tray as required.

Above 35 sq.mm and upto 95 sq.mm (clamped with 25mm X 3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5 X 50 sq. mm (32 mm)

Supplying and fixing of following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar , interconnections, powder painted including earthing as required.(But without MCB/RCCB/isolator)

8 way(4+24),Double door

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Supplying, testing and commissioing of following size XLPE Aluminium Armoured Cable Aluminium Conductor 650/1000 V. Grade confriming to IS: 7098 (Pt-1) 1988

3.5 C X 50 sq. mm

Supply, installation, testing and commissioning of recess mounting, 595mm x 595mm LED Luminarie with higher efficacy, full diffuser, provideing uniform light of 36 Watt having Corelated Colour Temperature >=5700K enclosed in white powdered coated housing and framed in CRCA Sheet, Power Factor ≥ 0.95, complete with Electronic driver pre-wired up to terminal block along with accessories such as aluminium case frame for installation in Gypsom/POP ceiling , nut-bolt, earth wire etc as per approval of engineer -in -charge etc. as required.

Supplying and installting following size Hot dip galvanized iron raceway in convenient sections,joined with connectors including GI bolts and nuts as required.

mm width X 40 mm depth X 1.6 mm thickness

S. ROSE ENTERPRISES (BID ID -3158283)

Master Electric Store (BID ID -3160254)