SPECIAL REPAIR TO ROAD INSIDE 15 PUNJAB AND SPECIAL REPAIR TO ROAD FROM BUILDING NO P 18 TO P 123 UNDER GE WEST COLABA MUMBAI

Amount

Preparing existing black top surface with wire brush for removing caked mud etc., sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a primimng/ tack coat with cationic bitumen emulsion RS-1 grade @ 5 kg/10 sqmt of surface complete all as specified and as directed.

M & L for bituminious premix dense asphaltic concrete 40 mm (compacted thickness) using graded crushed stone aggregate premixed with binder (paving grade bitumen VG 30 grade) @ 5.5% by weight of total mix & hydraulic lime filler, rolled and compacted to required camber and gradient complete all as specified and directed. Note :- (i) Bituminous premix dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined following the Marshall Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs 57 per kg.

Preparing existing black top surface with wire brush for removing caked mud etc., sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a primimng/ tack coat with cationic bitumen emulsion RS-1 grade @ 10kg/10sqmt of surface complete all as specified and as directed.

M & L for bituminous macadam not exceeding 75 mm thick (compacted thickness) using hot mix plant and mechanical paver with 4% binder (paving bitumen VG-30 grade) content by weight of total mix, rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient complete all as specified and directed. Note :- (i) Bituminous macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined as per IRC 27: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs 57 per kg.

S & F in repairs road convex mirrors outdoor type made of one piece polycarbonate plastic of size 80 cms dia, outdoor type, mounted on steel frame including all fixing arrangements and necessary foundations (300mm X 300mm X 450 mm with M15 using 20mm graded stone aggregate) complete all as specified and as directed.

S & F in repairs LED powered solar road studs of size not less than 110 mm X 110 mm X 25 mm ( with shank height not less than 50mm) made of weather resistance aluminium alloy and poly carbonate material electronically welded micro- prismatic lens with abrasion resistant coating. Protection shall conform to IP 65 in accordance with IS: 12063-1987 Category 2 for protection against water ingress. Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt. One Ni-Mh or NI-cd Rechargeable Battery (1.2V / 1600 MA). The cats eye shall support a load of approx 10 TON weight. The slope of retro- reflective surface shall be 35 ± 5 degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The stud shall provide a viewing distance of not less than 800m. The studs shall be flushed onto the to the Road surface and fixed using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. Make- Roadstar or equivalent as approved by GE

Fixing only in repairs LED powered solar road studs of any size, flushed onto the to the Road surface and fixed using the adhesive conforming to IS, as per procedure recommended relevant IS complete and as per direction of Engineer-in-charge. Note- Item will be issued under Sch B " Free for Fixing only.

S & F metal delineator 1100 mm long X 100 mm x 20mm MS Rectangular (medium grade) powder coated MS pipe with top cover with jali 400 mm long from top and pasted with twin colour reflective tape strips embedded 200 mm below ground level (approx 2-3 Kg weight) including excavation and PCC M15(Nominal Mix) with using 20 mm graded stone aggregate in foundation of size 200 mm X 200 mm X 200 mm and making good surface complete as per direction of Engineer-in-charge. Make: 3M or equivalent make as approved by GE.

Fixing only metal delineator to be embedded 200 mm below ground level including excavation and PCC M15(Nominal Mix) with using 20 mm graded stone aggregate in foundation of size 200 mm X 200 mm X 200 mm and making good surface complete as per direction of Engineer-in-charge. Note- Item will be issued under Sch B " Free for Fixing only.

S & F in repair cat's eye plastic body having two ways reflector with abrasion resistant lens, fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. Make:- Sinor infrastructure Cat part No DA-971 (P) or equivalent as approved by GE

Fixing only in repair cat's eye plastic body having two ways reflector with abrasion resistant lens, fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. Note- Item will be issued under Sch B " Free for Fixing only.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for Mild Steel framed work such as grills , gratings, etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, drain cover, framework of water tanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make -(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

Demolition of reinforced cement concerte as in cover slabs of manholes or septic tanks, soak pits etc. and removing debries out side MOD land complete all as specified and directed.

M & L for RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) as in Precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and direceted.

S & F deformed or twisted TMT bars 8 mm dia cut to length bent to shape required including cranking, hooking ends, binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Demolition of brick work built in cement mortar for cracked wall of manholes, septic tank,soak pits etc and all other similar works and removing debries out side MOD land complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, straight curved on plan, exceeding 6 metre mean radius, with old size bricks, built in CM 1:4 for cracked wall of manholes,septic tank, soak pit etc. in foul position complete all as specified and directed.

Taking down cement or cement lime plater on brick or stone walls ec inclunding raking out joints, hacking for key scubbing down with water etc and removing debries out side MOD land complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 inside and outside wall of manhole of brick work/ concrete surface and finishing even and smooth without using extra cement complete all as specified & as direcetd.

M & L for providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 in road side kerb stones of any shape & size and all other similar works complete all as specified and directed.

M & L for preperation of old/new concrete kerb stone surfaces and applying two coats of retro-reflective enamel paint of any colours and pattern complete all as specified and directed .

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar and removing debries out side MOD land complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced and removing debries out side MOD land complete all as specified and directed.

M & L for PCC M 20,1:1.5:3, type A1 (using 20 mm graded stone aggregate) as in flooring and other simillar works complete all as specified and directed.

M & L for crushed sand filling under precast interlocking paver blocks and all other similar works complete all as specified and directed.

M & l for 60 mm thick factory made cement concrete interlocking paver block of M35 grade with grey cement and pigment conforming to IS 15658-2006 made by block making machine with strong vibratory compaction of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over complete as per the direction of Engineer-in-charge. Make: Ultra Tiles, Nitco, Mehtab Tiles, Pavit, Shino. Note :- Sand cushioning shall be paid separately under relevant item.

Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, 20% glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete all as specified and as directed. Make :- Berger guidline/Dulux Trade line/Indigo

M & L for LED curb stone of size 500x150x200 mm made out of 5 foundation rods ensuring complete protection against theft and having a LED strip of lenght 470 mm with 22 nos LED which is plastic coated and having adequates number of connectors and one power supply kit as per manufacture requirement all as specified and as directed by Engr-in-Charge. Note- Item includes connection to main electric supply from near by electric sources. Make Hydrose LED Curb stone or equivalent as approved by GE

RS Enterprises

Vandan Enterprises