Repair work in (Pooled Housing Colony Colony Type - 1 and 2) Residencial building in F.Y. 2025-26

Dismantling Tile Work in Floor And roofs Laid in cement Mortar including stacking material Within 50 meters Lead For thickness of Tiles 10 mm To 25 mm. DSR (15.23.1)

Brick work with common burnt clay machine moulded perforated F.P.S.(non modular) bricks of class designation 12.5 conforming IS : 2222 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). Above plinth level upto floor V leve DSR (6.31.2)

12 mm thick cement plaster of mix 1:6 (cement 6 coarse sand) DSR (13.4.2)

1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived 6. from natural sources) DSR (4.1.8)

Reinforced cement concrete work in walls (any thickness). including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering. shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR (5.2.2)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more DSR (5.22.1)

Providing and fixing aluminium work for doors, windows ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and 1S: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) DSR (21.1.1.1)

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angels 40x40x6 mm for diagonal braces DSR (10.5.1)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Kiln seasoned selected planks of sheesham wood 35 mm thick DSR (9.9.1.1)

Providing and laying (white/colored) Kajaria tiles, Ramano tiles flooring work 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement (with pigment) slurry including rubbing and polishing complete.in dedo 200x300 mm DSR (11.40)