Construction of multi-storey office cum SCADA complex building Gurugram

Amount

WALLPAPER : Providing and Fixing Vinyl Coated Wall covering as per approved make and pattern as approved by the client and architect.

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (A) 300mmx38mm (GI) - 3 compartment

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (B) 225mmx38mm (GI) - 3 compartment

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (C) 150mmx38mm (GI)

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as per the directions of engineer in charge (D) 100mmx38mm (GI)

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65-90 mm including all accessories complete in all respect as per the directions of engineer-in-charge - (a) 300 x 300 x 65-90 mm

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65-90 mm including all accessories complete in all respect as per the directions of engineer-in-charge - (c) 150 x 150 x 65-90 mm

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65-90 mm including all accessories complete in all respect as per the directions of engineer-in-charge - (b) 225 x 225 x 65-90 mm

Providing and Applying Melamine polishing on wood work complete in all respect .

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 1200x600mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 1200x600mm FOR SKIRTING ONLY

Providing and fixing zebra blinds on windows complete.

Providing and Fixing High Density Fibre (HDF) Laminate Flooring in different colour and shape having thickness 8 mm laid over 1 mm thick damp proof foam all complete.

Providing and fixing weather proof Fire Hose Cabinet of size not less than 0.75 x 0.6 x 0.25 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside `with the letters `FIRE HOSE` including necessary locking arrangement and painting in PO red colour suitable to accommodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man`s axe. It shall be mounted on boundary wall complete as required

Providing and fixing standard firemans axe with heavy rubber handle.

Providing and fixing white vitreous china wash basin under counter / Table Top basin, with C.I. concealed type brackets fixed to walls with GI rag bolts or approved fasteners etc., including 32 mm CP brass waste coupling, including painting of fittings and brackets, cutting and making good the walls wherever required all complete (Granite counter top will be measured and paid separately under relevent item): as per approved make and decision of engineer-in-charge

Providing and fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required.

Providing and fixing CP brass auto closing system basin pillar tap / hand wash as approved by Engineer- In Charge

Providing and fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. 100 mm dia

Providing and fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. 150 mm dia

Providing and fixing in position GI 100x50 elbow floor drain including cost of cutting and making good the walls and floors wherever required.

Providing and fixing 125 mm dia S/S grating (with or without hole)for floor or Nahani trap.

Providing and fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. 200 mm dia

Providing and fixing soap dispenser with glass bottle from wall of standard shape with fittings of approved quality with all complete.

Providing and fixing Fire Extinguishers (CO2 type powder ) 4.5 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing 600 mm grab bar long stanless steel from wall face with concealed fittings arrangement of approved quality with all complete. Make Jaquar - AHS-1507

Providing and fixing Fire Extinguishers (A, B, C type powder ) 9 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing GM fire Brigade Suction hose coupling (Draw out Connection) with nut for female coupling as per IS:902-1974 complete with 100mm dia. 1 No C.I Foot valve flanged (to be connected to static water tank)

Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete. 150 MM HDPE PIPE

Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for soil / waste pipe under ground drainage system with jointed with rubber ring with good quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets, junctions, re excavtion and refillig etc complete. 200 MM DIA HDPE PIPE

Supply, installation, testing and commissioning of vertical inline multistage pumping set (Imported) with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base and head with mechanical seal, connected to a TEFC induction motor suitable for 415 plus /- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock,including suction and delivery headers of G.I `C` class pipe of required dia, isolation valves, NRV of PN-16 grade,required valve and strainer and vibration eliminators on both suction and delivery side of pumps, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information. 1 working plus 1 standby Flow rate (each) = 75 LPM Head = 50 m

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 88m Head

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. `Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.` M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 2280 lpm at 88 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180pm at 88 m Head

`Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.` 150 mm. dia

Supply, installing, testing and commissining of submersible single stage single entry pumps with SS -304 Casing / Body , SS -304 Impeller , SS -316 Shaft connected to TEFC submersible motor with class IE-3 efficiency and IP 55 Protection and class F insulation for 415 plus 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphram and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, dry running Protection with gunmetal isolation cock,including suction and delivery headers of G.I `C` class pipe of required dia, isolation valves, NRV of PN-16 grade,required valve and strainer and vibration eliminators on both suction and delivery side of pumps complete in all respects. (Pumps shall be installed in a set of two pumps One working and One standby , Pump shall be automatic ON / OFF on Cyclic Pattern ) Drainage Sump Pumps ( 1 Working : 1 Standby ) (Pumps to be suitable to handle solids upto 28 mm size) Capacity - 250 LPM (Each) Head - 15 M Eff. - Class IE-3

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required . 25 mm dia

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required . 32mm dia

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required . 40 mm dia

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required . 50 mm dia

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required . 65 mm dia

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required . 80 mm dia

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required . 100 mm dia

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required . 150mm dia

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required . 200 mm dia ( Wall thickness 6.3 mm )

Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding excavation and Providing cement concrete blocks as supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the trench etc of following sizes complete as required . 250 mm dia ( Wall thickness 6.3 mm )

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers , gaskets conforming to IS : 13095 of following sizes as required . 80mm dia

Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers , gaskets conforming to IS : 13095 of following sizes as required . 100mm dia

Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers , gaskets conforming to IS : 13095 of following sizes as required . 150 mm dia

Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers , gaskets conforming to IS : 13095 of following sizes as required . 200 mm dia

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points) Primary point controlled by one MCB.

Providing Installation Testing and Commissioning of Non Return Valve of following sizes conforming to IS : 5312 complete with rubber gasket , GI Bolts , Nuts , washers etc as required . 80mm dia

Providing Installation Testing and Commissioning of Non Return Valve of following sizes conforming to IS : 5312 complete with rubber gasket , GI Bolts , Nuts , washers etc as required . 100 mm dia

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points) Points to be looped with Primary point with 2.5 sqmm wire and Point wiring

Providing Installation Testing and Commissioning of Non Return Valve of following sizes conforming to IS : 5312 complete with rubber gasket , GI Bolts , Nuts , washers etc as required . 150 mm dia

Supply, Installation, Testing and Commissioning of 10 W Bulk head Light.

Providing Installation Testing and Commissioning of Stainless Steel Y Strainer fabricated out of 1.6 mm thick stainless steel , Grade 304 , Sheet with 3 mm dia holes with stainless steel flange . 150 mm dia

Supply, Installation, Testing and Commissioning of 5W Mirror Light.

Providing Installation Testing and Commissioning of Stainless Steel Y Strainer fabricated out of 1.6 mm thick stainless steel , Grade 304 , Sheet with 3 mm dia holes with stainless steel flange . 200 mm dia

Supply, Installation, Testing and Commissioning of 18W Surface/Recessed Mounted LED circular Downlighter.

Supply, Installation, Testing and Commissioning of 18/20W Wall/Surface mouted 4 ft. LED

Supply, Installation, Testing and Commissioning of 15W Surface mounted LED Square Downlighter.

`Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :` Gun Metal

Supply, Installation, Testing and Commissioning of 12/9W Recessed mounted LED circular Downlighter.

Supplying and Fixing First aid hose reel with MS Construction Spray painted in Post office red conforming to IS : 884 complete with the following as required 20 mm nominal internal dia water hose thermoplastic ( Textile Reinforced ) Type - 2 as per IS : 12585 20 mm nominal internal dia gunmetal globe valve and nozzle Drum and Brackets for fixing the equipments on wall Connections from Riser with 25 mm dia stop gunmetal valve and MS Pipe and socket 40 Metre Length

Supply, Installation, Testing and Commissioning of 42W (Nominal) 2x2 ft Recess Mounted LED Luminaire.

Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal

Supply, Installation, Testing and Commissioning of 65W (Nominal) Recessed mounted LED Luminaire.

Supplying and Fixing of Fire brigade connection of Cast iron body with gunmetal male intantaneous inlet coupling complete with cap and chain as required for suitable dia ms pipe connection conforming to IS : 904 as required 2 Way - 100 mm dia MS Pipe

Supply, installation, Testing and commissioning of the following rating UPS as per specifications and complete in all respects. 40 KVA UPS 3 phase (415 V plus 15%) Volts input and 3 phase output (415 V plus 1%), 50 Hz, Input harmonic Current THD 3% typical at 100% load, 6% maximum at 50% load with Isolation Transformer and 30 min battery backup for each UPS along with battery cabinet complete in all respect including supporting steel structure for UPS and Battery as required. 40 KVA CAPACITY

Supplying and Fixing of Fire brigade connection of Cast iron body with gunmetal male intantaneous inlet coupling complete with cap and chain as required for suitable dia ms pipe connection conforming to IS : 904 as required 4 Way - 150 mm dia MS Pipe

Supplying and Fixing Air Vessel made of 250 mm dia 8 mm thick ms sheet 1200 mm in height with air release valve on top and flanged connection to riser drain arrangement with 25 mm dia gunmetal wheel valve with required accessories pressure gauge and painting with synthetic enamel paint of approved shade as required

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : upright

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without Independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (Switch Control Secondary Points) Group A

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Horizontal side wall Sprinkler

Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required. 150mm dia

DSR 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR 1.14.1 2 X 1.5 sq. mm plus 1 X 1.5 sq. mm earth wire

Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 150mm dia

DSR 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR 1.14.2 2 X 2.5 sq. mm plus 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR 1.14.3 2 X 4 sq. mm plus 1 X 4 sq. mm earth wire

Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1000mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR 1.14.4 2 X 6 sq. mm plus 1 X 6 sq. mm earth wire

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR 1.14.5 2 x 10 sq. mm plus 1 x 6 sq.mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR 1.14.10 4 X 10 sq. mm plus 2 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR 1.14.11 4 X 16 sq. mm plus 2 X 6 sq. mm earth wire

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

DSR-1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x 0.75 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside `with the letters `FIRE HOSE` including necessary locking arrangement and painting in PO red colour suitable to accommodate, internal hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man`s axe. It shall be fixed inside the FHC Cabinet Complete as required .

`Supply, installation, testing and commissioning of 5 MP (2592 x 1944) Dome camera , ONVIF profile S , Gand T BIS,UL , CE , FCC Certified ,1/2.7” Progressive Scan CMOS ,2.7 mm to 13.5 mm motorized varifocal lens , Quad stream with each stream support H.265 compression simultaneously ,min illumination : Color 0.05lux @ F1.2(AGC ON) : B/W 0 lux @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,WDR , Compression : H.265/H.265 plus /H.264/H.264 plus .SD card support upto 256GB, Cloud Storage , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 and30 fps@5MP, , ROI Min. 8 Region, Two Way Audio, Hardware reset, Edge analytics : Face Detection, Customer Flow staistics, Heat Map, Human and Vehicle Detection, Pedestrian Intrusion Detection and Line cross Detection. Queue length detection, Regional population statistics, SOD-Stationaary Object Detection, Tempering detection, Rare Sound Detection, Defog, Motion Detection, License plate detection. Protocol:- TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP,SMTP, NTP, UPnP, SNMP, HTTPS,FTP PPPOE, NFS/SMB/CIFS, P2P , In built IR LED , IR Distance upto 45 meters , IP 66 ,IK10,POE/12V DC. `

`Supply, installation, testing and commissioning of 5 MP (2592 x 1944) Bullet camera , ONVIF profile S , Gand T BIS,UL , CE , FCC Certified ,1/2.7” Progressive Scan CMOS ,2.7 mm to 13.5 mm motorized varifocal lens , Quad stream with each stream support H.265 compression simultaneously ,min illumination : Color 0.01lux @ F1.2(AGC ON) : B/W 0 lux @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,WDR , Compression : H.265/H.265 plus /H.264/H.264 plus .SD card support upto 256GB, Cloud Storage , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 and30 fps@5MP, Net HDD, ROI Min. 8 Region, Two Way Audio, Hardware reset, Edge analytics : Face Detection, Customer Flow staistics, Heat Map, Human and Vehicle Detection, Pedestrian Intrusion Detection and Line cross Detection. Queue length detection, Regional population statistics, SOD-Stationaary Object Detection, Tempering detection, Rare Sound Detection, Defog, Motion Detection, License plate detection. Protocol:- TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP,SMTP, NTP, UPnP, SNMP, HTTPS,FTP PPPOE, NFS/SMB/CIFS, P2P , In built IR LED , IR Distance upto 45 meters , IP 67 ,IK10,POE/12V DC. `

`Supply of Outdoor IR 1080p60fps HD PTZ Camera with 1/2.8`` progressive scan Exmor CMOS, Effective pixels 1920 x 1080 approx. 2.1M pixels, 30x Optical Zoom 4.5 mm - 135 mm (F1.6 - F4.4): Optical Zoom Field of View (FOV) :- 2.4° - 60.9°, 16X Digital Zoom, Minimum Illumination- Sense up on- Color: 0.05 lux , B/W: 0.01 lux, With infrared (IR) 0 lux, WDR 90dB, Video Analysis ( Object removal , Loitering , Enter or Exit from the Field , Object Classification etc.) Intelligent Dynamic Noise Reduction, BLC, White Balance, Mechanical switchable IR filter, Pan Range 360° continuous, Tilt Range 0°–90°, Pan/Tilt Modes - Pan: 0.1°/s - 240°/s: Tilt: 0.1°/s - 120°/s, Presets 256 , Tours, IR distance 150 m (590 feet) (Detection), IR can be internal or external with full 360 deg PAN coverage Audio- 1/1 Channel In/Out, Memory card slot (support upto 1TB) , 24 individually configurable privacy masks, Simple single cable installation with POE plus support for indoor/Outdoor application, Defog, IP66 , ONVIF Profiles S and G, CE, UL Certified. `

Supply, installation, testing and commissioning of 32 channel NVR , ONVIF compliant , recording bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out , 2 X RJ-45 port (1000M) , Bit Rate 16kbps-20mbps per channel, Sync Playback 4/8/10/16 ch playback, iOS smartphone support , third party camera supported, 8 HDD support , each HDD slot support upto 8 TB HDD , , 1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse, Display resolution up to 4K, 1 E-Sata Port, RS-485 Port, Cloud Storage, Net HDD, Two Way Talk, Edge analytics : Customer Flow staistics, Face Attendence, Face Detection and Recognition, Heat Map, Human and Vehicle Detection, Pedestrian Intrusion Detection and Line cross Detection, Queue length detection, Regional population statistics, SOD-Stationaary Object Detection, Deterrence, PIR, AI Registerd Qty- 10000 and AI Captured Qty- 200000. Protocol support:- HTTp, TCP/IP, IPv4, UPNP, RTSP,UDP,SMTP,NTP,DHCP,DNS,IP filter,PPPOE,DDNS,FTP,IP search, P2P, NFS/SMB/CIFS, IPC Management. Certifications: UL,CE,FCC,BIS.

Supplying ,Installation, Testing and commissioning of 8TB HDD for Storage.

Supply, Installation, Testing and Commissioning of 24 port 10/100/1000 plus 2 X gigabit SFP , managed L-2 Switch with SFP module switching capacity 216 gbps, Complete as per side required.

Supply Installation,Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14HP modules, micro processor based Controller,top discharge type condensing unit(s), with R410A Refrigerant,vibration isolators,with suitable foundation etc. complete as required.The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping.The unit shall be suitable to work on 400V plus /-10%, 3Phase, 50HzAC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required.The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5. (Considering conversion factor IHP= 0.83TR) Unit Per HP

Supply, installation ,testing and commissioning of following minimum capacity 4-wayflow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter , fan section with low noise fan /dynamically balanced blower ,multi speed motor, coil section with DX Copper coil,electronic expansion valve,outer cabinet,drain pump,grill ,necessary supports ,vibration isolation, cordless remote control etc.,suitable for operation on singlephase 230V±10%, 50HzAC supply, complete, as required.The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System.The cooling capacity of indoor unit will beat air inlet conditions of 27DegreeCDBand19DegreeCWB temperature. 1.5 TR

Supply, Installation, Testing and commissioning of 12U Rack - Outdoor with PDU,FAN and Cable Manager(Wallmount).

Supply, installation ,testing and commissioning of following minimum capacity 4-wayflow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter , fan section with low noise fan /dynamically balanced blower ,multi speed motor, coil section with DX Copper coil,electronic expansion valve,outer cabinet,drain pump,grill ,necessary supports ,vibration isolation, cordless remote control etc.,suitable for operation on singlephase 230V±10%, 50HzAC supply, complete, as required.The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System.The cooling capacity of indoor unit will beat air inlet conditions of 27DegreeCDBand19DegreeCWB temperature. 2 TR

Design, supplying, installing, testing and commissioning of Sewage Treatment Plant for 20 KLD STP electro mechanical system based on MBBR technology. Anticipated effluent parameters before treatment:PH 7.5 - 8.5 BOD 250 mg/lt SS 450 mg/lt. COD 500 mg/lt. T-N upto 35 mg/lt P upto 10 mg/lt Desired Sewage discharge standard after outlet of UF are as below: pH: 6.0 - 9.0 TSS ( 10 mg/lit BOD5 days ( 10 mg/lit COD (50 mg/lt Sewage treatment plant shall include the following Civil Units : (Client Scope) Bar Screen Chamber-1 No. Oil and Grease Chamber -1 No. Sewage equalization tank -1 No. Anoxic Tank -1 No MBBR Tanks -2 Nos. Tube Settler Tank -1 No. Chlorine Contact Tank -1 No. Sludge Holding Tank -1 No. Treated Water Tank -1 No.- 45 Flushing WaterTank -50 KL Foundation for Electromechnical- 1 No. Sump Pit-1 No. Supply, installation, testing and commissioning of 2 Nos SS 304 Perforated Coarse Type Screen Size 800mm x 800mm with suitable garbage lifting arrangement. - 1 Set Mixer for anoxic tank. 1 Set ( Make: ATE/Toro/Aqua Itly/Ebara ) Supply, installation, testing and commissioning of level switch for automatic operation of system. - Lot Supply, installation, testing and commissioning of Submersible, non clogging type pumps capable of handling solids minimum 20 mm having CI casing and impeller with SS Shaft complete with mechanical seal and all accessories, motor of required capacity. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock. Pumps shall have following duty. Make: Willo/Grundfos/Leo/Lubi Submersible Sewage Transfer Pumps Flow Rate (each) 4 m3 / hr Head 15-17 Mtr - 2 Nos Submersible Sump Pumps Flow Rate (each) 4 m3 / hr Head 8-10 Mtr - 2 Nos Cost shall be inclusive of PVC Flexible Pipe 40mm dia , rope for lifting pump from sump to outside. Providing and fixing horizonal,centrifugal sludge recirculation/Transfer pump . The pumps shall have CI casing, CI Impeller with mechanical rotary shaft seal. Motor to be suitable for including all necessary piping valves and other accessories complete as required. Solid Handling capacity 7-10mm Sludge Recirculation Pump-Anoxic To MBBR Capacity : 10 Cum/hr. Head :8-10 mtrs. - 2 Nos Make : Kirloskar/MandP/Lubi/Leo Sludge Recirculation Pump-Anoxic To MBBR Capacity : 2 Cum/hr. Head :8-10 mtrs. - 2Nos Make : Kirloskar/MandP/Lubi/LeoAir diffusion system shall include the following: Supply, installation, testing and commissioning of twin lobe, rotary Air blower capable of delivering 220 cum/hr of free air at required pressure driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. Blower Make- Everest/Beta/Akash Air Blowers Flow Rate (each) 120 m3 / hr @ 5000mmwg - 2 Nos Air Grid in UPVC complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, paint,supports and clamps, puddle flanges etc cutting chases and making good the wall wherever required. Contactor to submit detailed P and I indicating their proposal. - Lot Make: Astral/Prince/Supreme/Vectus Non-clog type air dispersion system capable of handling required air with oxygen transfer efficiency. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily. (Coarse and Fine bubble membrane diffusers. - Lot Make : Rehaue/Ecologix/EDI Note : Air dispersion system shall be provided for MBBR Tank and Equalization Tank. Providing and fixing all interconnecting piping (as described below) and isolation control valves for making the system complete. The piping material shall be MS `B` class. MS Epoxy : Non submerged air piping and pumped effluent riser ( non-submerged) uPVC/PVC: Submerged air line. uPVC/PVC Piping : Interconnecting pipe line after delivery header of pump / filter - 1 Job Make: Astral/Prince/Supreme/Vectus/Jindal/Tata Supply, installation, testing and commissioning of MBBR media. The media shall be enough for proper functioning of STP. [MBBR System to be in two reactors] - 1 Job Make: MM Aqua/Cooldeck `Supply, installation, testing and commissioning of PVC tube deck settling media to be installed in Tube Settler Tank alongwith retainer plates and suitable sludge removal arrangement either by pumps or any other suitable arrangement. Capacities, length, width,depth, of the media shall be enough for proper functioning of STP. - 1 Job Make: MM Aqua/Cooldeck Supply, installing, testing and commissioning of ultravoilet dis-infection unit. The unit shall have over 99.9 % bacterial reduction from inlet to outlet. The dis-infection chamber shall be constructed of SS 316L on all welted parts. The UV lamp shall be of low pressure mercury vapour type with hard glass enclosure, the sockets shall be water tight and vibration resistant. The lamp life shall be rated for 6000 hours. Flow Rate : 12 m3/hr Dosing Pump: Alfa Mumbai/ Sukruit/One Point Supplying, installing, testing and commissioning of centrifugal pumps, CI body, CI impeller. motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply Make: Willo/Kirlosker/Leo/Lubi Filter feed pumps: Capacity : 4 Cum/hr.Head : 25-30 Mtrs - Nos Supplying, installing, testing and commissioning of MSFRP vessel filter with all necessary accessories. Filter shall be suitable for minimum working pressure of 5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc. Make: Thermax/Ecologix/Ion Exchange Multigrade pressure sand filter Flow rate : 4 Cum/hr Filtration rate: 15 m3/hr/m2 HOS : 1800 mm Dia: 500mm - 1 Set filtering sand, anthracite, pebbles and gravel media MOC: MSFRP Activated Carbon Filter Flow rate : 4 Cum/hr Filtration rate: 15 m3/hr/m2 HOS : 1800 mm Dia: 500mm filtering sand, anthracite, pebbles and gravel media MOC: MSFRP - 1 Set Supplying, installing, testing and commissioning of Chlorine dosing system consisting of one HDPE tank of 100 litres capacity with a positive displacement diphragm dosing pump having variable flowrate of 0-10 lph. The motor shall be suitable for operation at 240 V/single phase/50 Hz. Supply. The pump shall be supplied complete with necessary polypropylene piping, valves, strainers, low level switch and injection fittings. The pump shall be speed and stroke control. 1-Set Dosing Pump: Toro/Prominent/Grundfos Electrical Panel- Motor Control Centre - 1 Set `Providing, installing, testing and commissioning of Ultra Filtration (UF) system for further polishing treated effluent and capable of producing 2000 litre / hour of polished water meeting the requirements . The system shall be complete with UF Feed Pumps (1W plus 1S), Membranre Flushing Pumps, Cartridge Filters , complete instrumentation for automation and monitoring, Rotameters, Pressure Gauges, interconnecting pipework, electrical cabling and switchgear, all complete as described in Scope of Work enclosed herewith. Filter Make: Azud/Toro. descrive above work all complete as Engineer-in-Incharge

Supplying, installation, testing and commissioning of Addressable monitor module, 100% soft addressed from panel, integral short circuit isolators, capable of monitoring NO contacts, Option to choose operation mode as supervision of 20Sec or activation immediatee to connect NO/NC contacts such as pressure switch, flow switches, fire pump contacts etc Module shall be supplied with mounting plate from OEM for ease of installation and maintenance.

Intelligent and electronically addressable photoelectric smoke detector with microprocessor in head and including mounting base with LED etc. complete as per specification (Above False ceiling)

Intelligent and electronically addressable photoelectric smoke detector with microprocessor in head and including mounting base with LED etc. complete as per specification (Below False ceiling)

Supply, Installation, testing and commissioning of 11 KV DP structure as per CEI and SEB norms and comprising of the following, but not limited to it for completion of works RSJ pole of 9.15 mt length of size 175 x 90 mm complete with suitable M.S. base plate welded at bottombase plate - 2 Nos. MS Channel of size 100 x 50 mm, length 4 mts (approx) 11 KV AB switch - 1 set 11 KV Horn Gap fuse Unit - 1 set 11 KV Lightning Arrestor 11 KV Disc insulator 11 KV Pin insulator 6 SWG copper wire for jumpering Supply and erection of Stay set complete with necessary foundation, excavation and refilling of earth etc. as required. Concrete foundation for RSJ poles burrioed upto a depth of 1830 mm in ground in a pit of size 450X450 mm in CC 1:3:6 along with 200 mm copping above ground inclusive of earth work. Necessary Nut, Bolts, clamps, operating handle for AB switch, clamping welding etc. complete as required. Painting the RSJ poles complete with two coat of Red Oxide and two coats of GI enamel paints complete as required. Transpotation of all materials and accessories at site Complete erection, testing and commissioning.

Supply , Installtion , Testing and comissioning of armoured 6 core Singlemode OFC cable for interfloor switch connectivity.

Supply, Receiving, Unloading, Storing, Shifting, Installation, Testing and Commissioning of indoor type floor mounted, dust, damp and vermin proof, cubicle HT. Metering Panel made out of 14 gauge CRCA sheet steel complete with 5 Amp electronic trivector meter, C.T.`s of 40/5 Amp, 0.5 Class, 10 VA Burden, and P.T`s of 11 KV / v3, 110V / v3, 100 VA conforming to relevant IS Standards and complete as required. H.T. Metering cubicle along with C.T.`s, P.T.`s and trivector meter shall be got tested and approved from local electricity supply authority. The GA drawing shall be got approved by SEB/ local statutory authorities before fabrication.

Supply , Installtion , Testing and comissioning of 12 port loaded LIU with adaptor plates , pigtel cables for connections.

Supply , Installtion , Testing and comissioning of LC-LC singlemode fiber patch cord.

Design, Manufacture, Supply, delivery, erection, testing and commissioning of a single enclosed 2 mm thick sheet steel clad floor mounting, vermin proof, fully interlocked vertical isolation, extensible, horizontal draw out, air insulated, metal clad switchboard having double isolation features complete with circuits as detailed below. The switchboard shall be complete with necessary PVC insulated copper busbars, small wiring, labels, cable eyes, cable termination to receive XLPE cables, foundation bolts and suitable for operation on 11 kV 3 phase, 50 cycle, earthed system with a rupturing capacity of 350 MVA at 11 kV Panel shall be equipped with following accessories and as per specifications and schematic drawing. 1No. - Metal Clad housing with having 630A Vaccum circuit breaker with Electric operated mechanism (spring charged motor - 230V AC) 1-Set- Tripping coil and closing Coil 24V DC 1 - Set of isolating plug and receptacle 1 - Set of Automatic safety shutter 1- Set of breaker control switch (TNC) 1 set - Dual Core Cast Resin Current transformers of ratio 40/5A Class 5P10 and Class 0.5, 15 VA burden for protection and metering. 1set of 11/ v3KV / 110/v3 Volt, 100 VA burden and accuracy class 1, 3 nos. single phase construction, dry type cast resin PT 1 - Set of ON/OFF/Trip/ Spring Charged and Trip circuit healthy and phase indicating lamps. 1 No.- H.T. Cable joint box for 3C x 300 Sq.mm aluminium conductor XLPE cable,11 KV(E) 1- set of IDMT relay with 2 element of O/C protection(50%-200%) and 1 element of E/F protection (20%-80%). 1 no. Anti Pumping Relay 1 Set of Power Pack 220 Volt A.C. / 24 Volt D.C. complete as required. Supplying,Installation,Testing and Commissioning Rate for 11 kV HT Panel as described above

Supply, installation ,testing and commissioning of following minimum capacity 4-wayflow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter , fan section with low noise fan /dynamically balanced blower ,multi speed motor, coil section with DX Copper coil,electronic expansion valve,outer cabinet,drain pump,grill ,necessary supports ,vibration isolation, cordless remote control etc.,suitable for operation on singlephase 230V±10%, 50HzAC supply, complete, as required.The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System.The cooling capacity of indoor unit will beat air inlet conditions of 27DegreeCDBand19DegreeCWB temperature. 3.2 TR

Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger ( SMPS Based ) with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 12 Nos. 20/16A DP MCB`s (D.C. duty) as outgoing complete as required and as directed by Engineer Incharge.

Supply, installation, testing and commissioning of 800 kVA 11000/433 volts Deta/Star, vector group DY11, outdoor mounting, oil cooled, ONAN transformer with ON Load Tap Changer (OLTC) AVS relay and RTCC for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote manual operation of On Load Tap changer, suitable for incoming voltage variation of plus 5% to - 15% in steps of 1.25% 17 steps to give a constant secondary voltage. The transformer shall be provided with fittings, accessories, protection, first filing of oil etc. including Buchholz oil temperature alarm/trip protection and space for mounting differential protection CT`s in LV chamber complete as per specifications and as required. The transformer shall be provided with arrangement to terminate XLPE cable on HT side and to connect XLPE Cable on LT side, complete as required and conforming to IS:1180 EEL II (Revised in July 2017), IEC 60726 and IS 2026, ECBC-2017, ANSI, NEMA standards and as per specification complete in all respects as required at site. Transformer described as above.

Supply, installation ,testing and commissioning of following minimum capacity 4-wayflow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter , fan section with low noise fan /dynamically balanced blower ,multi speed motor, coil section with DX Copper coil,electronic expansion valve,outer cabinet,drain pump,grill ,necessary supports ,vibration isolation, cordless remote control etc.,suitable for operation on singlephase 230V±10%, 50HzAC supply, complete, as required.The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System.The cooling capacity of indoor unit will beat air inlet conditions of 27DegreeCDBand19DegreeCWB temperature. 4.0 TR

Supplying of following size of aluminum conductor, XLPE insulated armoured and over all PVC sheathed, 11 KV (E) grade earthed cable as per relevant IS code and technical specifications 3C x 240 sq.mm. XLPE insulated Aluminium. Armored. Cable

Supply, installation ,testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower ,multi speed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet ,cordless remote control , drainpan , necessary accessories etc.,suitable for operationon 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic forceshut down provisionin case of fire on receiving signal from BMS System.The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. 1.65 TR

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 150 mm dia ID

The TFA shall be of double skin construction complete with filter, cooling coil and constant volume supply air fan sections.The unit shall be of uniform cross section throughout and free standing type.Construction shall be prefabricated individual framed sections bolted together with neoprene gaskets between to make a complete unit. All AHU`s shall be ceiling suspended /Floor Suspended type. The AHU casing to have a `Penta-Post` perimeter frame with wholly be easily removable.Formed from galvanised sheet externally powder coated, rigidly reinforced with 50mm thick foam or fibreglass insulation. The outer skin of casing panels shall be of minimum 1.0mm thick galvanised steel sheet and the internal skin shall be of minimum 0.8mm thick GSS sheet. All air handling units shall include thermal breaks on casing framework,and wherever required to prevent condensation on the casing.Thermal breaks shall be in the form of profiled rubber inserts between internal and external surfaces.TFA Shall be complete with DIDW Centrifugal fan ,starters for AHUs with motor capacity less than 3 HP , Squirrel cage induction motor, cooling coil (Copper tubes and Aluminium fins, 0.5 mm thick) With UV Lamp.TFA shall incude the cost of metering, power and control wiring between Control panel and Motor 2500 CFM (CS) TFA, 10.0 TR, 6 row deep cooling coil, 40 mm Static Pressure.

Providing and filling AAC blocks including proper watering and compaction in sunken areas all complete as per drawings and as directed by the Engineer-in-chargein-Charge.

Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means.

Providing and Installation of Funder Max / ALSTRONG for cladding on exterior pergolas 9mm thick Exterior grade F- Quality panels of standard size with both side décor . The Panels shall be perforated as per the design of the Architect. FunderMax / ALSTRONG Exterior panels are duromer high-pressure laminates (HPL) as per EN 438-6 type EDF manufactured with norm conformity of EN 438-7 using patented NT Technology (NT is Non fading high performance acrylic polyurethane surface Technology). Panels will be double hardened including acrylic polyurethane resin and thermally cured under high pressure. These Panels will have CE-Mark necessary for their use in building applications. Installation of FunderMax panels will be done by MBE Rivets (with Fixed and Sliding Points) with recommended Aluminum T section of 100x50x2 mm thick and L section 50x50x2mm thick held by Aluminum Wall Bracket with Wind load and Dead load slot as per design, anchored by standard anchor fasteners along with Thermal Separator. Installation of FunderMax Panels will be done using Rear Ventilated Principles only, which is ensured by providing ventilation gap minimum 200 cm2/ per Meter (for free flow of air behind the façade) for the façade and using the framework with no horizontal section.

`Providing and fixing glass reinforced concrete (GRC) customized jali 50mm thick on Aluminium Frame work (Tubular section of size as required). Approximate size of Jali 1100 mm x 1800mm). Basic Rate of jali 4200 Rs./SqM excluding taxes, freight and loading and unloading`

Providing and fixing Stainless steel satin finish SS 304 grade Tower Bolts SS screws for wooden doors of approved make and model all complete as per the directions of Engineer-in-charge 250x10 mm

The TFA shall be of double skin construction complete with filter, cooling coil and constant volume supply air fan sections.The unit shall be of uniform cross section throughout and free standing type.Construction shall be prefabricated individual framed sections bolted together with neoprene gaskets between to make a complete unit. All AHU`s shall be ceiling suspended /Floor Suspended type. The AHU casing to have a `Penta-Post` perimeter frame with wholly be easily removable.Formed from galvanised sheet externally powder coated, rigidly reinforced with 50mm thick foam or fibreglass insulation. The outer skin of casing panels shall be of minimum 1.0mm thick galvanised steel sheet and the internal skin shall be of minimum 0.8mm thick GSS sheet. All air handling units shall include thermal breaks on casing framework,and wherever required to prevent condensation on the casing.Thermal breaks shall be in the form of profiled rubber inserts between internal and external surfaces.TFA Shall be complete with DIDW Centrifugal fan ,starters for AHUs with motor capacity less than 3 HP , Squirrel cage induction motor, cooling coil (Copper tubes and Aluminium fins, 0.5 mm thick) With UV Lamp.TFA shall incude the cost of metering, power and control wiring between Control panel and Motor 3500 CFM (CS) TFA, 14.0 TR, 6 row deep cooling coil, 40 mm Static Pressure.

Providing and fixing Stainless steel satin finish SS 304 grade Tower Bolts SS screws for wooden doors of approved make and model all complete as per the directions of Engineer-in-charge

Supplying, installing, testing and commissioning of inline fans suitable for installing in any position in vertical or horizontal ducts. The capacity of the fan given as under Air Quantity : 500 CFM Static Pressure : 15 mm wg Duty : Exhaust

`Supply and fixing approved Slim floor tile 3000mm x 1000mm Porcelain sheet having 3.5mm thickness with mesh on cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Suitable for internal and external facade with matt and slip resistant finishes weighing 21kg. Shade and installation process shall be as directed by Engineer in charge. Material shal confirm to BS EN 14411G. Slab shall include the surface hardness (UNE EN ISO 67-101) of 7 MOH scale, Stain resistance at class 5 (stains could be easily clean by hot water), Water absorption 0.4%, Resistance to chemical attack, Smog resistant, Froast resistance, Resistance to thermal shock and bacteria, Fire Resistance (A1 Class). ECO Friendly certification under GREEN GUARD CERTIFICATION from US Green Building Council and UV protected all complete as per drawing and as directed by Engineer-in-charge Rates shall include cost of all items listed above at all heights and levels including hardware etc as per drawings and as directed by the Engineer-in-charge`

`Supply and fixing approved Slim wall tile 3000mm x 1000mm Porcelain sheet having 3.5mm thickness with mesh on cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Suitable for internal and external facade with matt and slip resistant finishes weighing 21kg. Shade and installation process shall be as directed by Engineer in charge. Material shal confirm to BS EN 14411G. Slab shall include the surface hardness (UNE EN ISO 67-101) of 7 MOH scale, Stain resistance at class 5 (stains could be easily clean by hot water), Water absorption 0.4%, Resistance to chemical attack, Smog resistant, Froast resistance, Resistance to thermal shock and bacteria, Fire Resistance (A1 Class). ECO Friendly certification under GREEN GUARD CERTIFICATION from US Green Building Council and UV protected all complete as per drawing and as directed by Engineer-in-charge Rates shall include cost of all items listed above at all heights and levels including hardware etc as per drawings and as directed by the Engineer-in-charge`

Supplying, installing, testing and commissioning of inline fans suitable for installing in any position in vertical or horizontal ducts. The capacity of the fan given as under Air Quantity : 1000 CFM Static Pressure : 15 mm wg Duty : Exhaust

Providing and laying floor tiles in size 122x247mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

```Supply, installation, testing and commissioning of direct driven Axial Flow Fans as shown in drawings and as per specifications. Each fan shall be complete with totally enclosed fan cooled motor IE-3 (IP:55), Starters, metering, power and control wiring between Control panel and Motor etc., motor mount and vibration isolators. Fan motor shall be suitable for 3 Phase, 415 plus /- 10% V, 50 Hz AC supply.(Motor speed shall not exceed 900 rpm). The Smoke Extraction Fan and its casing shall be suitable for smoke exhaust application and fan shall be AMCA certified. Motor shall be thermally rated (class H) for 250°C for 2 hours as per [BS-7346 Part-2 : 1990] Class-B. Axial Flow Fans with DOL starter below 7.5 HP and Star Delta for 7.5 HP and above``` Duty : For Basement -Normal Exhaust with class H Motor Air Quantity : 4000 CFM Static Pressure : 30 mm wg Motor Rating : 2 HP (Suggested)

```Supply, installation, testing and commissioning of direct driven Axial Flow Fans as shown in drawings and as per specifications. Each fan shall be complete with totally enclosed fan cooled motor IE-3 (IP:55), Starters, metering, power and control wiring between Control panel and Motor etc., motor mount and vibration isolators. Fan motor shall be suitable for 3 Phase, 415 plus /- 10% V, 50 Hz AC supply.(Motor speed shall not exceed 900 rpm). The Smoke Extraction Fan and its casing shall be suitable for smoke exhaust application and fan shall be AMCA certified. Motor shall be thermally rated (class H) for 250°C for 2 hours as per [BS-7346 Part-2 : 1990] Class-B. Axial Flow Fans with DOL starter below 7.5 HP and Star Delta for 7.5 HP and above``` Duty : For Basement -Smoke Exhaust in Case of Fire with class H Motor Air Quantity : 4000 CFM Static Pressure : 30 mm wg Motor Rating : 2 HP (Suggested)

```Supply, installation, testing and commissioning of direct driven Axial Flow Fans as shown in drawings and as per specifications. Each fan shall be complete with totally enclosed fan cooled motor IE-3 (IP:55), Starters, metering, power and control wiring between Control panel and Motor etc., motor mount and vibration isolators. Fan motor shall be suitable for 3 Phase, 415 plus /- 10% V, 50 Hz AC supply.(Motor speed shall not exceed 900 rpm). The Smoke Extraction Fan and its casing shall be suitable for smoke exhaust application and fan shall be AMCA certified. Motor shall be thermally rated (class H) for 250°C for 2 hours as per [BS-7346 Part-2 : 1990] Class-B. Axial Flow Fans with DOL starter below 7.5 HP and Star Delta for 7.5 HP and above``` Duty : For Electrical Panel Room -Fresh Air with class F Motor Air Quantity : 2000 CFM Static Pressure : 30 mm wg Motor Rating : 2 HP (Suggested)

CONTROL and TRANSMISSION WIRING Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for transmission

CONTROL and TRANSMISSION WIRING Supply, installation, testing and commissioning of 2 Core x 1.5 mm2 copper wire in PVC conduit as per specifications for remotes

Supply, installation, testing and commissioning of rigid heavy duty PVC piping complete with fittings, support as per drawing and insulated with 6 mm closed cell elastomeric insulation. 25 mm dia

Supply, installation, testing and commissioning of rigid heavy duty PVC piping complete with fittings, support as per drawing and insulated with 6 mm closed cell elastomeric insulation. 32 mm dia

Providing and laying Wall tiles in size 122x247mm with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete.

`ALUMINIUM LOUVER Supply and fixing of Aluminium louver 600 mm fixed type louver system consisting of single skin high corrosion resistant aluminium alloy of Al Mn05-Mg05 (ENAW 3105) of 0.90 mm thick, plain and customized perforation. The louver is fixed on aluminium extruded tube with aluminium extruded wing shaped brackets of Alloy Al-Mg-Si 0.5 (ENAW 6063-T6) with fixing system accessories which shall be manufactured on high speed, high precision roll forming machine with ARKU SIX Hi configuration roller levelling process. The customized perforation pattern dully approved shall be done on CAD/ CAM auto index to achieve flatness of the panel without any undulation. The maximum unsupported length of louver fin shall be 5700mm and required length shall be determined based on structural design requirement by considering the relevant wind load, dead load and deflection criteria. The module and angle of fin for the fixed system shall be as per the approved drawing.` The full louver fins shall be fixed at the both ends on the concrete slab. MS steel sub-structure and anchor fasteners required to fix the fins to be provided by the main contractor (MS substructure and anchor fasteners shall be paid additionally in separate item). Visible area of the fin can be covered using back skin of 0.7mm thick aluminium if required as per client’s requirement. The fin shall be coated on visible side with The Aeroscreen fin shall be coated on visible side (front and back skin) with exterior architectural super durable polyester based coil coating with minimum dry film thickness of 20 micron Aluminium panels shall be chromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer finish, the other side (Inner side) with a primer coat and skin coat on a Continuous paint line. `The coils to go through 4 stages of pre-treatment, three times oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability. The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and topcoat of approved colour of 15 microns. Central assembly and wing shaped brackets and customised brackets for half fins are anodised with minimum 10mircon. Manufacturer should have in house testing lab and powder coating line with Nano technology and Catalytic Converter Oven. The Rate includes labour, material, fixtures, accessories, Anchor Fastners etc complete as per drawings and specifications. Nothing Shall be paid extra.`

`Providing and fi xing Stainless Steel 304 tower bolts 24 INCHES with nuts and screws etc. complete (OZONE model no -OZ-TB-S 24`` or approved equivalent)`

REFNET (Y-JOINT ) Supply,installation,testing and commissioning of Y - Joints with necessary fittings as per specification.

Providing and fixing Stainless steel satin finish SS 304 grade 6` LONG Handles with SS screws for wooden doors of approved make and model all complete as per the directions of Engineer-in-charge

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

HOLLOW SS LEVER HANDLE ON ROSE WITH EUROPROFILE CYLINDER ESCUTCHEON , SS MATT (Hafele GEZE 19mm dia lever handle Suitable for 40 to 50mm door thickness, Grub screw fixing onto 8mm x 100mm spindle. For Wooden Doors IN PAIR (Hafele 98302002 or equivalent) `a) GEZE 55mm backset Mortise sash lock, 20mm stainless steel square forend, 72mm center to center with strike plate. With screws for Timber doors/Metal doors (ONE NO.).(Hafele 98484001 or equivalent) b) GEZE 52mm dia with 38mm fixing centers supplied with stainless steel structure 8mm thick (ONE NO.) (Hafele 98482002 or equivalent)` 5 pin Euro profile knob cylnder with 3 keys, 70mm length (ONE NO.) (Hafele 98245213 or equivalent)

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Providing and fixing Stainless steel SS 304 grade satin finish Half moon shape floor mounted door stopper of dia 44mm x 32mm with SS screws of approved make and model all complete as per directions of Engineer-in-charge

Supplying ,Installation, Testing and commissioning of 42” Full HD LED Display Unit - Wall Mount.

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required 41.3 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Supply, installation, balancing and commissioning of Factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 0.80 MM (22 gauge) Galvanized Sheet Steel Ducting

Supply, installation, balancing and commissioning of Factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 0.63 MM (24 gauge) Galvanized Sheet Steel Ducting

Supply, installation, balancing and commissioning of Factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 1.0 MM (20 gauge) Galvanized Sheet Steel Ducting

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 0.63 MM (24 gauge) Galvanized Sheet Steel Ducting

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 0.80 MM (22 gauge) Galvanized Sheet Steel Ducting

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 1.0 MM (20 gauge) Galvanized Sheet Steel Ducting

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

Supplying and fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying and fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers as per specifications.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring and removable core.

Supplying, fixing testing commissioning of Return air/ Exhaust diffusers of powder coated aluminium without volume control dampers with anti smudge ring and removable core.

Supplying ,Installation, Testing and commissioning of HDMI Cable- 3Mtr

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. Fire damper

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. Actuator

Supplying, fixing acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 Kg/M3, with 25 mm x 25 mm GI section of 1.25 mm thick at 600 mm centre to centre covering with rienforced plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound complete as required and as per specification.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class“O”) insulation on existing duct after applying Suitable adhesive for nitrile rubber. The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. 19 mm thick (In Condition Space)

Supply , Installtion , Testing and comissioning of CAT6 information outlet (I/O) for Data, Voice, CCTV and Wi-Fi rack.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class“O”) insulation on existing duct after applying Suitable adhesive for nitrile rubber. The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. 25 mm thick (Non condition Space)

Supply, installation and balancing of extruded aluminium powder coated air louvers complete with aluminium wire mesh birdscreen and volume conrtol dampers as per specifications. Fresh air louvers

Supply , Installtion , Testing and comissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination.

Supply, installation and balancing of extruded aluminium powder coated air louvers complete with aluminium wire mesh birdscreen and volume conrtol dampers as per specifications. Exhaust air louvers(without volume control dampers)

Supply, Installation and Testing of 125mm deep Antivibration Flexible Joints made out of imported fire retardant fabric with extruded aluminium frame/ flange on both sides of approved make. For Inline fan /Ductable

Supply and Installation of VRF Outdoor unit Frame work constructed out of MS Channel (75 x 40) having cross angle supports, 150 x 150 mm size MS plates in bottom. The complete stand shall be enamel painted and with anti vibration pads

Providing and fixing G.I Frame for Partitions consisting of G.I vertical studs of size 50mm and horizontal members @ 600 x 600 or where ever required as per manufacturer, specs, using Gypsteel sections, hardwood will be inserted as may be required to fix door frames skirting etc. with all necessary fixing arrangement complete as per shown in drawing and directed by the Architect. Quote only for framework with 50mm thick glass wool. All components to be of India Gypsum or LA gyp (la farge) The cost to be included of 50 mm thick 24 kg/m3 density glass wool insulation inside the partition frame work including jointing and finishing.

Providing and fixing Galvanized chicken wire mesh 0.4mm-0.8mm thick with hole size of 8x16mm at junctions of RCC and brick work including nails, tools etc. all complete as directed by the Engineer-in-charge

Supply of fire buckets 4 No. in each set duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. Fire buckets shall be painted red from outside and white from inside with additional handle at the bottom and suitable for outdoor installation.

Providing and fixing roller blinds comprising of polymer coated fibre fabric (make-phifer) pvc free and lead free with minimum openness factor of 3% as per AS standards. The fabric shall be fire retardant and have high heat reflection ratios. The roller mechanism shall be a moulded unit made from engineering grade plastic polymer with steel spring support. The fabric shall be finished on the sides with edge tape duly welded for waviness control. The fabric shall be attached to the roller tube with high quality self adhesive tape. Headrail: shall be .812` high x 2` deep extruded aluminum headrail with a wall thickness of 0.045” and painted to coordinate with fabric color. Cord lock: shall be a snap-in design of injection-molded thermoplastic incorporating a metal, free-floating, serrated cord-locking roller. Lift cord: shall be 1.2mm polyester and concealed for a clean appearance. A snap tassel and joiner ball connect to a single Danskord for raising and lowering the shade. Cord, tassel and joiner ball are color coordinated with fabric. Installation: Bracket shall be low profile, hidden snap-in design made of 0.025” zinc-plated spring steel. Bottomrail: shall be 0.375` high x 2` deep extruded aluminum with a wall thickness of 0.045” and painted to coordinate with fabric color. Fabrication Shades shall be fabricated according to specifications and accurate to tolerance established by SWF engineering standards

Supply and fixing on position the approved Single Line Diagram framed in 1000 x 800 mm size glass frame and installed in main switch room as directed by Engineer Incharge

Providing and fixing roller blinds comprising of polymer coated fibre fabric (make-phifer) pvc free and lead free with minimum openness factor of 3% as per AS standards. The fabric shall be fire retardant and have high heat reflection ratios. The roller mechanism shall be a moulded unit made from engineering grade plastic polymer with steel spring support. The fabric shall be finished on the sides with edge tape duly welded for waviness control. The fabric shall be attached to the roller tube with high quality self adhesive tape. Headrail: shall be .812` high x 2` deep extruded aluminum headrail with a wall thickness of 0.045” and painted to coordinate with fabric color. Cord lock: shall be a snap-in design of injection-molded thermoplastic incorporating a metal, free-floating, serrated cord-locking roller. Lift cord: shall be 1.2mm polyester and concealed for a clean appearance. A snap tassel and joiner ball connect to a single Danskord for raising and lowering the shade. Cord, tassel and joiner ball are color coordinated with fabric. Installation: Bracket shall be low profile, hidden snap-in design made of 0.025” zinc-plated spring steel. Bottomrail: shall be 0.375` high x 2` deep extruded aluminum with a wall thickness of 0.045” and painted to coordinate with fabric color. Fabrication Shades shall be fabricated according to specifications and accurate to tolerance established by SWF engineering standards (for blackout roler blind100% opaque fabric.)

Supply of First Aid box as directed by Engineer Incharge

Supply of tool kit with 1 pair 11 KV rubber hand gloves as directed by Engineer Incharge.

Supplying and fixing standard shock treatment charts in English and Hindi duly framed and covered with glass as directed by Engineer Incharge.

Providing Safety mat made of elastomeric polymers Material (Class B) 1.2 M wide with thickness 2.5 mm to withstand 12KV dielectric strength AS PER relevant IS Code

Providing a mat made of elastomeric polymers Material (Class A )1.2 M wide with 2 mm thickness to withstand 1.1 KV dielectric strength AS PER relevant IS Code

Design, manufacture, supply, erection, testing and commissioning of following rating of DG Sets in Accoustic Enclosure, having self excited and self regulated 415 V, 3 Phase, 4-Wire, 50 Hz, 0.8 p.f. Alternator coupled with multi-cylinder, turbo-charged/ turbo-charged after cooled as called for, Diesel Engine capable to generate the power not less than the required BHP to achieve the alternator capacity as given below, with radiator Cooled, Residential type silencers and Electronic governer (G3 Governing System), DG set controller suitable for Auto Synchronization and Auto Load Sharing with microprocessor based Synchronization relay like Woodward/Dief/ Deepsea or equivalent including providing of Engine control panel, 24V batteries of suitable rating, battery-charger with battery leads, inbuilt oil fuel tank of capacity as per OEM standards and complete with all standard accessories and protection as required and as per specifications, including first filling of lube oil, fuel tank, providing common base plate, anti vibration pads, drip trays, foundation bolts, nuts, bolts, cable termination/adopter box sutiable to terminate upto of 3.5Cx240 sq.mm. XLPE cables as required for a complete installation including RCC/PCC foundation for DG set as per the structural detail for Dynamic Load submitted by the Vendor and approve by the Client. DG set should comply relevant Indian standards. DG shall have Remote Monitoring System. 500 KVA (With Acoustic Enclosure)

Supply, installation, testing and commissioning of exhaust pipe fabricated out of 6 mm thick MS pipe Class C Heavy duty conforming to IS:3589 with all fixing accessories and hardwares.The work include necessary cladding of exhaust pipe work using 50 mm thick Loosely bound resin (LBR) mattress/ mineral wool/ Rockwool, density not less than 120 kg/m3 and aluminium cladding (0.6 mm thick) for the complete portion. The exhaust pipe work includes necessary supports, foundation etc. to avoid any load and stress on turbo charger / exhaust piping.The exhaust pipe shall be run along the existing wall of the building duly clamped/supported on independent structure for which, the design and Drawing for such structure shall be got approved from the Engineer-in-charge. 200 mm dia

Design, supply, fabrication and erection of steel structure from channel /angle iron of suitable sizes to support the chimney /exhaust MS pipe duly taking into consideration of the wind load/pressure at the site etc. including the cost of civil foundations as required to support a maximum of 2 nos exhaust chimneys on the overhead platform complete as required. The structure shall be given primer coat and two coats of enamel painting.

SS Flexible Bellow 300 mm dia

Aluminium cladding for the residential silencers

Supply and Fixing of Y Bend for Exhaust pipe

Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete.

Supply, testing and commissioning of 6 meter high G.I octagonal pole (Above Ground Level) with single/double arm as per requirement of suitable length with inbuilt junction box with 10A SP MCB, connectors for incoming/outgoing cable connection and 300mm x 300mm x 20 mm thick base plate and bracket (double arm/single arm whichever required) complete in all respect.

Supplying, installation, testing and commissioning of 60W LED Solar Street Light On 6 Meter GI octagonal Pole having Compact, Aesthetic, Eco friendly and modern integrated Solar street light in extruted Aluminum construction with high efficiency monocrystalline silicon photo voltaic panel, high efficacy SMD LED 9500K having secondary lens optics for street lighting distribution, high performance lithium battery, MPPT charge controller and Intelligent control module/sensor with higher reliability, long service life, suitable for easy and quick installation.

Supplying, installation, testing and commissioning of 60W LED Street Light IP66 LED with High performance having system lumen output of minimum 6000 lumens, contemporary designed housing made of die-cast aluminium, with street optic LENS for uniform light distribution. PF better than 0.9, CRI better than 70 complete with all accessories.

Trap door for Gypsum False ceiling Providing and fixing trap door in false ceiling, made of 12.5 mm thick prelaminated ply/ fixed including all hardware, hard wood lipping etc. complete as per drawing and design. Make: Knauf Size: 600x600

Supplying, installation, testing and commissioning of Gate light fitting suitable for 45 watt IP 65LED having system lumen output of minimum 4200 lumens complete with all accessories and lamp.

Supply of Lightnig counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, meet the requirements for IS/IEC 62305 and IEC 62561-2.Tested for Electrical ,Mechanical and Chemical as per IEC 62561.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections. 50 mm x 6 m thick GI flat

Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections. 50 mm x 6 mm thick Cu flat

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 4 X 6 sq. mm (28mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 4 X 10 sq. mm (28mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 4 X 16 sq. mm (28mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 3½ X 25 sq. mm (28mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 3½ X 35 sq. mm (32mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 3½ X 50 sq. mm (35mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 3½ X 70 sq. mm (38mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 3½ X 95 sq. mm (45mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 3½ X 120 sq. mm (45mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 3½ X 150 sq. mm (50mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 3½ X 185 sq. mm (57mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 3½ X 240 sq. mm (62mm)

`Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.` 3½ X 300 sq. mm (70mm)

ALUMINIUM SKIRTING : Supply of 100 mm `DMC` Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thichness 1.30 to 1.50 mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

CLICK and LOCK TILES (LVT) : Providing and Fixing of 5 plus 1 mm thick Click-N-Lock tiles with wear layer is of 0.5 mm, Stone Polymer composite and has an IXPE Cushion backing of 1 mm ,100% Water and Termite proof, Scratch / Fire / UV resistant, a Recyclable Green product having WEL- LOCK click system with suitable skirting. Classification of abrasion resistance ( Rubbing action of two abrading wheels of S-42 Type , load Applied 500 grams, No. of Cycles 4,200).Design as approved by the Engineer/Architect`

Single Compression Gland for Cu. Cable 4C/3C/2C x 4/6/2.5 sq.mm.

Providing and Installation of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width and 100 mm Height) U Shape panels in RAL color finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm. Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be 150 mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels.

Supply , Installtion , Testing and comissioning of CAT6 patch cord 7 feet for user termination to information outlet Rack End.

Supply of LED Lights behind the Fabric Wall/False ceiling in noddes/PCB with rece nmended wattage as per manufactura`s standards to gve an effect ofambicnt lighting LED make MLS/ Bridgelux /Osram- SMD 2835, LED spacing/Pitch should be aticast 73-80mm with beam anele of 170 degree. Colour temperature shoud be as per design intent 3000K/4000K/6000K Wattage of 8-10W/mr. LED modules/PCB sbould be positioned properly to pronde an cven ight low, casting noshadows or dark spots. LED Driver Cost included.

Supply andinstallation of fabric false cciling/wsll formed out with NAKSHATRA CLIPSO TRANSLUCENT Printed fabric coverings made out of polyester knitted fabric costed with Polyurethane (PU). The NAKSHATRA CLIPSO TRANSLUCENT Printed fabric width of 2m, 3m. 4.lm and5.Im with weight of 200gm/m2, thickness of 0, 3 mm. The appcarance of fabric is malt, smooth and uniform with blanq color and light transmission of 50%. The tear strength of fabric should be accordance to CH: 4,5daN, TR: 6,5 daN. The fire rating should bc accordance to B-S1, d0. The fabric should be huznidity resistant and free of carcinogenic substancesCMR) or volarile organic Compounds (VOC`s) At labeling in acydance with the French decree no. 2011-321, Ocko-Tex standard100 cetified Fabric should be installed with approved nenufacturer guidelines. It comes with 10- year manufacturer guarantee. The installation of NAKSHATRA CLIPSO TRANSLUCENT Printed fabric should be dry installation and done at room lemperature sing CLIPSO PVC. ABS Grppers. Clipso ceiling base to be made of MS or Wooden frame finishing to a lush finish of tapered and square edges in desired design as per archtect specilication, LED Fittings included in the Item.

Supply , Installtion , Testing and comissioning of 42 U Wall mount rack with fans , 2 Nos of hardware pkts.

XLPE Insulated Copper Armoured Cables 4CX 2.5 Sq.mm

XLPE Insulated Copper Armoured Cables 2C x 4 Sq.mm.

XLPE Insulated Copper Armoured Cables 2C x 6 Sq.mm.

Supply, installation, testing and commissioning of Single Mode 1G SFP Module compatible with above switches.

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3½ X 300 sq. mm (70mm)

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3½ X 240 sq. mm (62mm)

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3½ X 185 sq. mm (57mm)

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3½ X 120 sq. mm (45mm)

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3½ X 95 sq. mm (45mm)

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3½ X 50 sq. mm (35mm)

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3½ X 35 sq. mm (32mm)

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3½ X 25 sq. mm (28mm)

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 4 X 16 sq. mm (28mm)

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 4 X 10 sq. mm (28mm)

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 4 X 6 sq. mm

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray cross members with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness

`Supply, Installation, Testing and Commissioning of electronic private automatic branch exchange (EPABX) system of Pure IP at core server Based voice solution with 04 Port Voicemail ,04 Port FXS ,04 Port FXO ,1 PRI Trunk lines (30 Ch) Circuit with CLIP Facility ,120 IP users License ,01 Nos. IP Operator Console, 100 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, TEC should be with GR Number, - Should Support Redundant server in active-Active mode. `

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray cross members with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

`Supply, Installation, Testing and Commissioning of Type 1 IP Phone 2 VoIP account, 120x40 Dot-matrix screen with backlight, Full HD duplex speaker phone, IPV6, Gigabit Ethernet, PoE . `

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray cross members with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 450 mm width X 62.5 mm depth X 2.0 mm thickness

`Supply, Installation, Testing and Commissioning of Type 2 IP Phone with 4 Voip accounts, 4 line keys, 3.5-inch (480x320) Colour Screen display with backlight, GigE, colour displays for 6 DSS keys, IPV6, 2 x Gigabit Ethernet , PoE. `

Supply, Installation, Testing and Commissiong of 4 Door 4 reader access control panel with onboard 32 Bit RISC ARM CPU, 8MB flash memory, shall support up to 100000 card user, 400000 event transactions, TCP/IP, the panel should have inbuilt 4 GB SD memory card to take mirror image of device configuration. data shall support standard Wiegand readers, Access Control panel should have MODBUS connectivity to integrate the panel with BMS (Building Management System), with metal enclosure and inbuilt power supply, facility of din-rail mounting should available. capable to integrate with IP/CCTV and NVR for access event alerts, Inbuilt door interlocking facility, SNMP alerts facility, Low battery and AC fail alert facility and reader Tamper detection alert facility should available.

Supply, Installation, Testing and Commissiong of Cloud Compatible enterprise level Web based Modular Access Management and Time Attendance software with SQL Database and support up to desired number of users. Single GUI Plateform with complete modular software with provision to integrate with different application ie: Access Control, VMS, Alarm Management, etc. Employee Self Service - login module for Employee/HOD/MANAGER where they can view their attendance: they can apply for leave/manual punch/tour entry/outdoor entry though internet with their login ID and password. Same way manager can online approve all application sent by employee. Comprehensive Email and SMS module for to send various SMS and Email on the base of different events in Access Control and Time Attendance system. It should support Multi company, multi location, multi department, multi login with different rights, muti hierarchy of employee, Should support maker and checker facility - the local administrator should able to add the users but he should not able to authenticate/approve the User, Approval right of the added user should be with main Administrator. Dedicated output reports for Payroll integration, Duress Authentications, Email and SMS can be sent on every configured event ie: Leave Application/approval, Manaual Punch Application/Approval,Outdoor Application/Approval, Tour Application/Approval, Condone Application/Approval . Holiday restriction (Reader Wise), Device Configuration – Push/Pull, Dual Authentications, Easy Employee tracking as outdoor Employee Attendance should marked with their GPS Location, Employee can mark Offline attendance (If No Network) through Android Mobile App.

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray tee`s with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supply, Installation, Testing and Commissiong of Mifare smart Card Reader Technical Specs.

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray tee`s with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supply, Installation, Testing and Commissiong of Mifare Smart Card Contactless transmission of data and supply energy (No battery needed), Operating Distance: Upto 100mm (Depending on Antenna Geometry), Operating Frequency: 13.56 MHZ. Fast Data Transfer: 106 Kbit/s High Data Integrity: 16 Bit CRC, parity, bit coding, bit counting. 1 Kbyte, organized in 16 sectors with 4 blocks of 16bytes each (one block consists of 16 byte), User definable access conditions for each memory block. Data retention of 10 years. Mutual three pass authentication (ISO/IEC DIS9798-2), Data encryption on RF-Channel with replay attack protection. Individual set of two keys per sector (per application) to support multi-application with key hierarchy. Unique serial number for each device. Transport key protects access to EEPROM on chip delivery.

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray tee`s with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 450 mm width X 62.5 mm depth X 2.0 mm thickness

Supply, Installation, Testing and Commissiong of Electromagnetic Lock 600 lbs, Single leaf, LED Status Display.

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supply, Installation, Testing and Commissiong Electromagnetic Lock 1200 lbs, double leaf, LED Status Display.

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 450 mm width X 62.5 mm depth X 2.0 mm thickness

Supply, Installation, Testing and Commissiong of 8 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers and the access controllers).

Supply, Installation, Testing and Commissiong of U/L Clamp made of aluminium anodised for EM Lock.

Supply, Installation, Testing and Commissiong of Exit push button as required.

Supply , installation, testing and commissioning of Fingerprint plus Proximity reader with wiegand output. Supporting EM as well as HID prox cards. Configurable wiegand interface(8 to 128 bits). Capacitive type sensor. 9500 finger templates. Recognization and matching time ( 1sec. Steel coating on sensor to work in rugged enviornment.

HVAC PANEL INCOMER 1 No. 630 Amp FP MCCB, 36 kA breaking capacity with microprocessor release and rotatry handle. METERING and INDICATION 1 set of R,Y,B phase indicating lamps 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB 1 No. (0-630A) Ammeter with ASS with 3 nos. 630/5A CT`s BUS-BAR 1 Sets of 800A TPN Aluminum bus bars with colour coded heat shrinkable PVC sleeves. OUTGOINGS 8 Nos. 100 A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle. 8 Nos. 63 A TPN MCCB, 25 kA breaking capacity with thermal release and adjustable setting and with rotary handle. 2 Nos. 63A TPN MCB, 10 KA Supply, Receiving, fixing, testing and commissioning of HVAC PANEL as described above

Supply , Installtion , Testing and comissioning of CAT6 patch cord 3 feet for rack side switch termination for user End.

DSR 17.2.5 Supplying, installation, testing and commissioning of response indicator on surface/recessed MS Box having two LED,metallic cover complete with all connections etc as required.

DSR 17.2.7 Supplying, installation, testing and commissioning of fault isolator complete with base as required.

DSR 17.2.10 Supplying, installation, testing and commissioning of addressable fire control module complete as required.

DSR 17.2.9 Supplying, installation, testing and commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

DSR 17.2.15 Supplying, installation, testing and commissioning of addressable horn cum strobe complete as required.

DSR 17.2.14 Supplying, installation, testing and commissioning of addressable manual call point complete as required.

DSR 17.2.17 Supplying, installation, testing and commissioning of fire fighter telephone handset complete as required.

DSR 17.2.19 Supplying, installation, testing and commissioning of fire fighter phone jack complete as required.

DSR 17.3.2 Supplying, installation, testing and commissioning of 1.5/3/6W ceiling speaker complete as required.

DSR 17.3.2 Supplying, installation, testing and commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

DSR 17.3.7 Supplying, installation, testing and commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.

DSR 1.53.1 Supplying and drawing of UTP 4 pair CAT6 LAN cable in the existing surface /recessed steel /PVC conduit as required (1 run of cable).

DSR 17.5.2 Supplying and laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring and FRLS outer sheath complete as required.

DSR 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. DSR 1.17.2 2 x 1.5 sq. mm

Capacitor Panel (195 KVAR) plus C171:C188 INCOMER 1 No. 400 Amp FP MCCB, 35 kA breaking capacity with microprocessor release and rotatry handle. METERING and INDICATION 1 Set of phase indicating lamps 1 No. 12 stage Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232 C port. Controller should mounted on the front side of the panel. Panel shall be suitable for Auto/Manual operation and shall be provided as per technical specifications. BUS-BAR 1 Set of 500A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 1 Nos.of 125A TP MCCB with suitable Capacitor duty contactor 3 Nos.of 63A TP MCCB with suitable Capacitor duty contactor 6 Nos.of 32A TP MCCB with suitable Capacitor duty contactor 2 Nos.of 20A TP MCCB with suitable Capacitor duty contactor 1 Nos. 50 KVAR capacitor Bank each with 7% harmonic and discharge resistor suitable capacity to carry expected current continuosly. with suitable size capacitor duty contactor, start/stop Push buttons, ON/OFF indication Lamps, Auto/ manual switch complete with wiring in all respects. 3 Nos. 25 KVAR capacitor Bank each with 7% harmonic and discharge resistor suitable capacity to carry expected current continuosly. with suitable size capacitor duty contactor, start/stop Push buttons, ON/OFF indication Lamps, Auto/ manual switch complete with wiring in all respects. 6 Nos. 10 KVAR capacitor Bank each with 7% harmonic and discharge resistor suitable capacity to carry expected current continuosly. with suitable size capacitor duty contactor, start/stop Push buttons, ON/OFF indication Lamps, Auto/ manual switch complete with wiring in all respects. 2 Nos. 5 KVAR capacitor Bank each with 7% harmonic and discharge resistor suitable capacity to carry expected current continuosly. with suitable size capacitor duty contactor, start/stop Push buttons, ON/OFF indication Lamps, Auto/ manual switch complete with wiring in all respects. Supplying,Receiving, fixing, testing and commissioning of Capacitor Panel as described above Note: The capacitos shall also stipulate the following (i) All the capacitors shall be suitable for 525 V (ii) Necessary control and fixing card with proper wiring and lugs of the required rating to be provided. (iii) Suitable exhaust fans, ventilation louvers to be provided for cooling. (iv) LED indication lamps for number of capacito banks ` ON and Power Factor lagging or leading. (v) The APFC shall be protected from following * Over- voltageand Voltage unbalance * Over temperature-system should be in standby mode and automatically restart after above condition restored. *Total harmonic Distortion

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 300 mm dia ID

Supply, Installation, Testing and Commissiong of Mifare smart Card Reader Technical Specs. Read Range -4-9 cms Data Read CSN/Sector Type Smart Card (Mifare Classic) Transmit Frequency 13.56 MHz Card (Transponder ) Mifare® Series (ISO14443-A) Card Read Time 0.1 Sec Output Interface Wiegand Format (32 Bits) LED Indicator Bi Color LED Power supply 12V DC @ 100mA Material Abs Plastic Card should be read in1 sec A Wiegand output that easily interfaces with most existing Wiegand protocol access control panels. Compact and Elegant. Easily installed on walls and doors.

Providing and fixing overhead storage as per design in repro,pantry and cabin etc. fabricated out of 19mm BWP commercial board finished in 1mm thk. laminate on both sides of approved shade and color. All exposed edges to be finshed with 2mm thk PVC edge binding or TW duco painted edge as per detail drawings. Avg height of storage to be 600 - 700mm the cost to be inclusive of intermediate shelf out of 19mm commercial board finished in 0.8mm thk laminate and rate to be inclusive of all necessary hardware etc.like SS handles, locks : tower bolts, magnetic ball catch, hinge etc. of approved make all complete. Rates of overhead storage to be inclusive of light trough below, according to design/details, throughout the running length of the storage. Overhead storage of following size: Note only BWP Board to be Used Kitchen storage length as per layout x 400mm X 700mm Ht.

Providing and fixing low height storage of following size storage: fabricated out of 19mm BWP commercial board in 1.0mm thk approved laminate from the outside and 0.8 mm laminate on the inside. All storages to have a backing of 12 mm thk MARINE PLY. rate to include back splash of 150mm above the counter in same finish. Shelves also to be lined with 0.8mm laminate from inside. All exposed edges to be finshed with 2mm thk PVC edge binding or TW edge duco painted as per detail drawings. Cost of the storage units to be inclusive of brushed steel finish handles, SS soft close hinges, tower bolts, Shutter magnets (Medium), locks, tower bolts, magnetic ball catch, hinge etc and all necessary hardware of approved make all complete as per drawing and detail and as per the instructions of the architect. The storages to have a support member of SS brushed steel section as per detail/design/design as provided by the Architect. Note only BWP Board to be Used Gents Toilet under counter storage Size: same as above but Size of : 450-600mm wide.

Providing and fixing low height storage of following size storage: fabricated out of 19mm BWP commercial board in 1.0mm thk approved laminate from the outside and 0.8 mm laminate on the inside. All storages to have a backing of 12 mm thk MARINE PLY. rate to include back splash of 150mm above the counter in same finish. Shelves also to be lined with 0.8mm laminate from inside. All exposed edges to be finshed with 2mm thk PVC edge binding or TW edge duco painted as per detail drawings. Cost of the storage units to be inclusive of brushed steel finish handles, SS soft close hinges, tower bolts, Shutter magnets (Medium), locks, tower bolts, magnetic ball catch, hinge etc and all necessary hardware of approved make all complete as per drawing and detail and as per the instructions of the architect. The storages to have a support member of SS brushed steel section as per detail/design/design as provided by the Architect. Note only BWP Board to be Used Kitchen /pantry under counter storage Size: same as above but Size of length as per layout, width 450-600mm.

Providing and fixing low height storage of following size storage: fabricated out of 19mm BWP commercial board in 1.0mm thk approved laminate from the outside and 0.8 mm laminate on the inside. All storages to have a backing of 12 mm thk MARINE PLY. rate to include back splash of 150mm above the counter in same finish. Shelves also to be lined with 0.8mm laminate from inside. All exposed edges to be finshed with 2mm thk PVC edge binding or TW edge duco painted as per detail drawings. Cost of the storage units to be inclusive of brushed steel finish handles, SS soft close hinges, tower bolts, Shutter magnets (Medium), locks, tower bolts, magnetic ball catch, hinge etc and all necessary hardware of approved make all complete as per drawing and detail and as per the instructions of the architect. The storages to have a support member of SS brushed steel section as per detail/design/design as provided by the Architect. Note only BWP Board to be Used Providing and fixing shutter for shaft/below whb counteras, shutters will be fixed on wooden frame (40x75mm) as per drawing. fabricated out of 19mm BWP commercial board finished in 1mm thk. laminate on both sides of approved shade and color. All exposed edges to be finshed with wooden lipping with polish all necessary hardware etc.like SS handles, locks : tower bolts, magnetic ball catch, hinge etc. of approved make all complete. : Note only BWP Board to be Used

Storage: Storage cabinet shall be formed out of 19mm thick Marine ply finished with approved laminate, edge finished with WOODEN LIPPING WITH Melamine polishing. Storage shall have openable shutters and drawer stack as per detail. Intermediate shelf shall be formed out of 19mm thick water proof ply finished with approved laminate. Storage to be complete with hardwares like handles, Auto Closing Hinges (top mounting hinges for 2nos. shutters), hinges installed as per the details and direction, etc. low height/Full height storage: 450mm deep. Storage cabinet shall be formed out of 19mm thick marine ply finished with approved 1.5mm. thick laminate and 0.8mm thick laminate inside, edge finished with wooden lipping with melemine polish. Intermediate shelf shall be formed out of 19mm thick water proof ply finished with approved laminate. Storage to be complete with hardwares like Auto Closing Hinges, installed as per the details and direction, etc. All exposed edges shall have wooden lipping with polish, as per detail.

Bidder Name

Amount

Ashok Kumar Garg (GSTN-06ABTPG1118P1ZC) BID ID -1139231

Aalaya Engineering Project Private Limited (GSTN-23AAICA6789P1ZV) BID ID -1148124

Sanjay Kumar, Contractor (GSTN-NA) BID ID -1148582

Aalaya Engineering Project Private Limited (BID ID -1148124)

Ashok Kumar Garg (BID ID -1139231)

Aalaya Engineering Project Private Limited (BID ID -1148124)

Sanjay Kumar, Contractor (BID ID -1148582)