REPAIR TO ROOF, CHAJJA, SUNKEN SLAB INCL REPAIR TO LEAKAGE AND SEEPAGE TO VARIOUS BLDGS OF AGE B/R-III OF GE (WEST) JABALPUR

Amount

Demolition of concrete of any description and in any position complete all as specified and directed.

M&L for 25mm thick cement concret Type B-1 1:2:4 (Using 20mm graded aggregate ) complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:3) on brick or concrete surfaces mixed with water proofing compound @ 2% by weight of cement finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC measured and paid separately)

Supply only integral water proofing compound

M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg sqm per coat. Including polythene film, black , 50 micron laid in floors.

M&L for lean concrete (1:5:10) Type E2 laid completed all as directed and specified

M&L cement concrete 1:1 ½:3 type A-0 using 12.5 mm graded stone aggregate as in roof kerbs PCC as in kerbs/covet fillet complete all as specified.

S&F GI tubing 40mm bore medium grade fixed to wall and ceiling or laying in floor as sunken spout all as specified and directed

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

S&F Glazed ceramic coloured tiles in vertical surface 350x250x7 mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement with pigment to match, laid over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.

S&F Coloured Non Skid ceramic joint free tiles 7 to 8mm thick area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors, set and jointed in neat cement slurryand pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for wire brushing and cleaning top surface of tiles,lime terracing or cement concrete,including flashing and junction of parapet,etc,and surface painting with a layer of blown bitumen of any penetration applied hot @1.70 kg per sqm.blinded with grit or pea size gravel @ 0.006 cu.m per sqm and lightly tampered (area of flashing etc.shall be added to the roof area complete all as specified and directed

Dismantling brick tiles or terracing tiles, single layer on roof s

Material and labour for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding 50mm thick in average complete all as specified and directed. .

M&L for 10 mm thick cement plaster in CM 1:3mixed with water proofing compound @ 2 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs:- (a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. (b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. (c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wover fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame. (d) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

M&L for 20mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

S&F cement concrete tiles size 25cmx25cmx22mm thick machine cut pressed set jointed and pointed in neat cement slurry with grey cement and pigments in floors and cut and polished complete all as specified and directed

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as sepecfied & directed.

Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and directed.

Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed..

M&L for Brick work with old size sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4 complete all as specified and as directed.

M&L for 5mm thick cement plaster in cement mortar 1:3 as on ceiling, soffits of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in CM (1:4) on brick or concrete surfaces mixed with water proofing compound @ 2% by weight of cement finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC measured and paid separately)

M&L for 15mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed.

M&L Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper incl chalk whiting on plastered surface complete all as specified and as directed.

Prepration of newly plastered surfaces and applying three coat of white wash on ceiling all as specified.

M&L Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and directed.

M & L for RCC (1:2:4) nominal Mix using 20mm graded aggregate in chajjas,parapet facia etc complete all as specified and as directed.

M & L for RCC (1:2:4) nominal Mix using 20mm graded aggregate in slab supported on walls,beam and column in floors, roof,landing, balconies,canopies,deck slabs and in shelves and the like complete all as specified and as directed.

Form work to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams with faiir finish etc complete all as specified and directed.

Formwork to chajjas, troughs and similar items including edges fair finished complete all as specified and directed.

S&F Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutters form the frames) area not exc 1.5 sqm each and removal to store complete all as specified and directed.

S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC “C” channel having strip of 20 mm width stuck inside with solvent cement rail on either side and as gap inset for top rail and bottom rail, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supply and fixing in the frame and site as specification all as specified.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain, colour PVC sheet reinforced with MS square tube, suppling and fixinging opening as per specification and drawing

S&F 100 mm but hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed.

S&F aluminum anodised barrel tower bolt 125 mm long of extructed section

S&F aluminum anodised handle cast type 125 mm, anodised

S&F in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good.

S&F in repairs PVC low level flushing cistern , white , 10 ltrs capacity with float valve and brackets complete including fixing low level flush pipe 32mm dia after dismantling of old unserviceable existing flushing cistern complete all as specified and directed.

S&F in repairs grating doom 100mm dia PTMT (Min weight 25 grms)

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed.

S&F in repairs Vitreous China Wash hand basin white, angle back size 600 x 480 mm size excluding taps, but including brackets fixed to walls complete all as specified and directed.

Taking down old GI tubing and connection including fittings 15mm bore pipe complete all as specified and as directed.

Taking down old GI tubing and connection including fittings 20mm bore pipe complete all as specified and as directed.

S&F 15mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors, complete all as specified and directed.

S&F 20mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors, complete all as specified and directed.

S&F repairs 15mm bore dia concealed/Angular stop valves chromium plated fancy type , screwed down , high pressure ,screwed both ends for iron pipe or for union and fixed complete all as specified and directed

S& F in repairs Stop valve cast copper alloy chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan headed screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe in repairs complete all as specified and directed.

S& F in repairs Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed 15 mm pipe complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings, heads, shoes, bends, swan necks etc.including cleaning or refixing or removal to store.

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) branch piece,single (single Y) equal or unequal complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) branch piece,single (single Y) equal or unequal complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) branch piece,double (single Y) equal or unequal complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) branch piece,double (single Y) equal or unequal complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) junction,single (single T) equal or unequal complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) junction,single (single T) equal or unequal complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) junction,double (double T) equal or unequal complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) junction,double (double T) equal or unequal complete all as specified and as directed.

S & F for Low density polyethylene (HDPE) 40mm pipes of pressure rating 6kgf/sq cm complete all as specified and directed.

Dismantling of cast iron drain pipe jointed with cement mortar/lead joint and taking out from wall/floor if reqd /75/100mm complete all as specified and directed.

S&F cast iron sand cast soil waste pipes of size 100 mm in any length with or without earts, with cement joints fixed to walls complete all as specified

S&F cast iron sand cast soil waste pipes of size 75 mm in any length with or without earts, with cement joints fixed to walls complete all as specified

S&F 100 mm branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed

S&F 75 mm branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed

S&F 100 mm cast iron sanitary connection 'S' or 'P' branch, with branch 370 to 450 mm long excluding join complete all as specified and directed

S&F Bends (any radius),diminishing pieces or tapers 100 mm bore complete all as specified and directed

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately)

S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts complete

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.

S&F prepainted 0.50mm thick galvanium aluminium zinc coating GI based corrugated steel coloured Sheet in the Tile Profile pattern having tensile strength of 550 Mpa as in roof covering & on chajjas fixed with self tapping screws as spd etc.

S&F prepainted 0.50mm thick galvalume aluminium zinc coating GI based plain steel coloured Sheet in having tensile strength of 550 Mpa as in roof serrated ridge fixed with self tapping screws as spd etc.

S&F 1.00mm thick plain galvanised, mild steel sheeting in hips, valley guttrs, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 gm completed all as specified and directed

M&L for mild steel work in wind tie/hold fasts or similar small articles conforming to Fe 290 Gde E-165 complete.

M&L for rolled mild steel sectioons in rafters, purlins and posts or hollow square pipe as in tiles battens etc. where connected to common rafters and running rails fixed with angle cleats or other connecting plates and nut, bolts etc. confirming to Fe-290 (Gde E -165).

S & F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nuts exc 5 cm and n exc 10 cm long of 10 mm dia completed all as specified and directed.

Disconnecting existing Tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re-fixing in position, water tanks of capacity Exc 500 & n exc 1000 ltrs.

Cleaning and removing , all scale and dirt, etc from tanks and from mouths of circulating pipes, etc of water tanks of capacity Exc 500 & n exc 1000 ltrs.

Dismantling Asbestos cement (Corrugated, semi-corrugated, etc.) sheets in roof coverings.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise describned and treated with Creosote complete all as specified and as directed.

Preparation of old painted steel surface of any description, over 10 cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L two coat of synthetic enamel painting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth completed all as specified and directed

S&F steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded

S&F steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded

S&F steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and as directed.

S&F 3mm thick sheet glass, pin head type and glazing with oil putty in a square n exc 0.5 Sqm in each pane completed all as specified and directed.

Chetna Enterprises

ANAMIKA CONSTRUCTION

RP ANAND

M/S CENTRAL REFRIGERATION AND ELECTRICALS