Const of various works such as Flooring and Tiling Finishing Examination Hall Toilets Volley ball Court incl. leveling of Ground at Govt. Model Hr.Sec.School Billawar.

Amount

Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1mtr from cutting edge, disposed earth is to be leveled and neatly dressed in: a) All kind of soil

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead. a) 1:3:6 or richer mix.

Providing and laying in position cement concrete 1:5:10 (1 cement:5 coarse sand:10 graded crushed stone aggregate 40mm excluding the cost of centring and shuttering. All works upto plinth level. (Refer J&K Sanctioned Schedule of Rates 2012, item code 4.5.10 (including all leads and lifts carriages of material by MT/HL)

Providing and laying in position cement concrete of 1:4:8 grade (1 cement : 4 fine sand : 8 graded crushed stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. All work upto plinth level (including all leads and lifts carriages of material by MT/HL)

a) 1 : 4 : 8 (1 cement : 4 fine sand : 8 graded nallah stone aggregate 40mm nominal size).

b) 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crusher stone aggregate 20mm nominal size).

Providing and laying Reinforced cement concrete 1:1.5:3(1 Cement: 1.5 Coarse Sand: 3 graded crushed stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircases having upto 15° slope excluding the cost of centering & shuttering. All works upto Floor V level. a) 1: 1.5: 3 (1 Cement: 1.5 Coarse Sand: 3 graded crushed stone aggregate 20 mm nominal size). (including all leads and lifts carriages of material by MT/HL)

Providing and laying Damp Proof Course 40mm thick with cement conc. 1:2:4(1 cement:2 course sand:4 graded stone aggregate 12.5mm nominal size). a) Crushed (including all leads and lifts carriages of material by MT/HL)

Centering and shuttering including strutting, propping etc. and removal of form work for:-

a) Foundations, footing, bases of columns etc for mass concrete

Suspended floors, roofs landings balconies and access plate form.

Edges of slab and breaks in floors and walls above 20cm wide.

d) Lintels, beams, plinth beams girders, bressumers and cantilevers.

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. a) Cold twisted bars.

Extra for making plaster drip coarse / Groove in plastered surface of moulding to RCC projections.a) Sunshade

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation plinth in cement mortar 1:6 (1 cement : 6 fine sand) (including all leads and lifts carriages of material by MT/HL)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (including all leads and lifts carriages of material by MT/HL)

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Honey-comb brick work 10/11.4 cm thick with bricks of class designation 75 in cement mortar 1:4 (1 cement: 4 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Supplying and filling in plinth with fine sand under floor including watering ramming consolidation and dressing complete.

Supply and filling of good earth /stone dust for leveling of ground including all lead and lifts.

Structural steel work welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

15 mm cement plaster on rough side of single or half brick walls of mix 1: 6 (1 cement: 6 fine sand) (including all leads and lifts carriages of material by MT/HL)

12 mm cement plaster on rough side of single or half brick walls of mix 1: 4 (1 cement: 4 fine sand) (including all leads and lifts carriages of material by MT/HL)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lungs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Second class deodar wood

Providing and fixing 35mm thick panelled or panelled and glazed shutter for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excl. panelling which will be paid for separately, all complete as per direction of engineer-in charge Second Class Deodar wood:

Providing and fixing paneling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or paneled and glazed shutters 25mm to 40mm thick

a) Plain Particle board 12mm thick flat pressed, 3 layer or graded wood particle board medium density grade I, IS:3087 marked

b) Second class deodar wood.

Providing and fixing 4mm thick weighing @ 10 kg/sqm) plain glass in fixed portion of Door/window vents with 2nd class deodar wood beading of 20x15mm.

Providing and fixing 100mm diameter and 60cm long rain water spout in cement mortar 1:4 (1 cement: 4 fine sand) stone ware spout (including all leads and lifts carriages of material by MT/HL)

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors windows and clerestory windows with hinges and necessary screws: ISI marked M.S. pressed bright finished butt hinges with necessary screws of required size Second Class Deodar wood:

Providing and fixing M.S. grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. a) Fixed to steel windows by welding.

Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry, but excluding the coat of nosing of steps etc. complete 50mm thick with 20mm nominal size of stone aggregate.

Providing and fixing glass strips in joints of terrazzo / cement concrete floor (40mm wide and 4mm thick).

Providing and laying 40mm thick cement concrete flooring 1:2:4 finished with a floating coat of neat cement slurry, but excluding the cost of nosing of steps etc. complete.

Making plinth protection 50 mm thick of cement concrete 1: 3: 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth crushed.

Providing gola 75x75mm in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone agg. 10mm down gauge) including finishing with cement mortar 1:3 (1 cement:3 fine sand) as per standard design in 75x75mm deep chase.

Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc. (Make Armocreate of SWC Chryso France) consisting of (a) applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining was upto 300mm height including rounding of junction of walls and slaps. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (iv) Finishing the surface with 20mm thick joint less cement mortar of mix 1: 4 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm / sq 3mm deep. (e) The whole terrace so finished shall be flooded with water far a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurras as 65mm. (including all leads and lifts carriages of material by MT/HL)

Making Khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1: 2:4 (1 cement: 2 coarse sand : 4 graded stone agg.20mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edges & making and finishing the outlet complete (including all leads and lifts carriages of material by MT/HL)

Providing and fixing on wall face un-plasticized rigid PVC rain water pipes conforming to IS:13952 type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. a) 110mm dia.

Providing 40x 5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30 x 10 x 15 cm 1 : 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

White washing with lime to give an even shade new work (three or more coats).

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @ 3.84 kg / 10 sqm.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Applying priming coat With ready mixed red oxcide zinc chromate primer of approved brand and manufacture on galvanized iron/ steel work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats).

Painting top of roof with bitumen of approved quality at 17 kg per 10 Sqm impregnated with a coat of course sand at 60 Cudm per 10 Sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete: a) With residual type petroleum bitumen of penetration 80/100.

Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete

Providing and fixing of aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws complete : a) 300x16mm

Providing and fixing of aluminum casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws complete :

Providing and fixing aluminum tower bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

(ii) 150 x 10mm

Dumping stones in horizontal i.e. on level including cost of stones (including all leads and lifts carriages of material by MT/HL)

Dismantling doors, windows and clerestory window (Steel or wood/shutter including chowkats, architrave holdfast etc. complete and stacking within 50 metres of area of 3 sqm. and below.

Dismantling wood work in frames, truses, purlins and fafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area 40 sqare centimeters and above.

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : In mud mortar.

Demolishing dressed stone work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead: In mud mortar.

Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License nos.with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank (Sintex, Electroplast, Star, Lotus, or equivalent having valid ISI license).

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. a) Concealed G.I. pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the walls.

(i) 15mm dia nominal bore

(ii) 20mm dia nominal bore

Providing and fixing G.I. pipe complete with G.I. fittings including trenching and refilling etc. (external work).a) 15mm dia nominal bore.

Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Parryware / Hindware / Seabird/Orient (Coral)/ Hindustan/Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever require. White Vitreous china Orissa Pattern W.C.pan of size 580 x 440mm with integral type foot rests.

Providing and fixing wash basin with C.I./M.S.brackets, (without pillar taps) 32mm C.P. brass waste coupling of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever required a) Flat back wash basin size 550 x 400mm (without taps).

Providing and fixing white vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.

Providing and fixing C.P.brass bib cock of approved quality conforming to IS:8931: 15mm nominal bore Mark, ESS, Cazar or of equivalent make as approved by Engineer-in-charge.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS:8931. a) 15mm nominal bore

Providing and fixing soil waste and bent pipes 100mm dia sand cast iron as per IS:1729.

Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings 1/C fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. (Internal work exposed on walls) 50mm nominal.

Providing and fixing 100mm sand cast iron grating for gully, floor or nahani Trap a) (Refer J&K Sanctioned Schedule of Rates 2012, item code 19.29).

Providing and fixing plain bend of required degree 100mm dia. Sand cast iron S&S as per IS:1729.

Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete 100mm.

Providing and fixing collar sand cast iron S&S as per IS:1729.

Providing and fixing mirror superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm (outer dimentions).

Providing and fixing 1st quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy bottle green, black or any size as approved by Engineer- in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30 kg per sqm including pointing in white cement mixed with pigment of matching shade complete (including all leads and lifts carriages of material by MT/HL)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 60x60cm (Double Charge) (including all leads and lifts carriages of material by MT/HL)

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Stone aggregate below(Crusher Bajree) 40mm size from Billawar crusher for an average lead of 5.00 Km. by M.T. b) Sand from from Billawar crusher for an average lead of 5.00 Km. by M.T. c) Bricks from Hiranagar for an av. lead of 70.00 Km. by M.T. d) Stone aggregate above 40mm nominal size from from Billawar crusher for an average lead of 5.00 Km. by M.T.

Pritam Singh

M/s Surinder Mohan Gupta

Tilak Raj Sharma