PROVN OF ADDN AND ALTN OF FOUR SHELTERS OWT INTO VARIOUS WARDS/DEPTS IN MH AND PROVN OF CERTAIN MINOR AND REVENUE WORKS AT LIKABALI MIL STN UNDER GE 872 EWS (8740/T-40/E8)

Amount

B/R SERVICES/WORKS

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) of any description, exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness, complete all as specified and as directed.

Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed.

M&L Hardcore broken Stone or Boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and well rammed to a True surface, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc., complete all as specified and as directed.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement and Formwork will be Measured and Paid for separately under appropriate Items.

M&L Pre-cast Cement Concrete 1:3:6 (20mm graded stone aggregate) Block Masonry with Solid Blocks, exc. 10 Cm in width, Set in Cement Mortar 1:6, complete all as specified and as directed.

M&L Formwork to Soffits of Suspended Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Work; not exc. 200mm thick (Horizontal or Sloping), etc., Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Plain Fillets, Bullnosed, Splayed, Chamfered or Rounded on One Edge or Face, Wrought, secured with Nails, Sectional Area exc. 3.0 Sq Cm but not exc. 6.0 Sq Cm, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Plain Fillets, Sqaure, Rectangular or Triangular in Section Cleanswan, secured with Nails, Sectional Area exc. 6.0 Sq Cm but not exc. 13.0 Sq Cm, complete all as specified and as directed.

M&L Aluminium anodised Powder coated (minimum thickness of Powder Coating 50 micron), Frame for Doors, Windows, Ventilators, having One or More Rebates on Frame including Jointing Cleat for fixing, etc., complete all as specified and as directed.

M&L Aluminium anodised Powder coated (minimum thickness of Powder Coating 50 micron) Door Shutters, Aluminium Section weighing 0.55 KG/RM including necessary Joining Cleats, Glazing Clips, Rubber Neoprene Packing, Handles (as approved) 2 No. & Aluminium anodised Barrel Tower Bolt 150mm long 2 No. in Each Door, Hinges, Aluminium anodised Snap Beading, Screws, etc., complete all as specified and as directed.

M&L Aluminium anodised Powder coated (minimum thickness of Powder Coating 50 micron) Window and Ventilator Shutters, Side Hung type without Sash Bars, Aluminium Section weighing 0.55 KG/RM including necessary Joining Cleats, Aluminium anodised Snap Beading, Screws, Glazing Clips, Rubber Neoprene Packing, Aluminium anodised Fittings such as Peg Stays 150mm long (1 No.), Hinges 100mm long, type B-21 (2 No.) suitable Handle (2 No.), etc., complete all as specified and as directed.

M&L Aluminium anodised Powder coated (minimum thickness of Powder Coating 50 micron) Window and Ventilator Shutters, Side Hung type without Sash Bars, Aluminium Section weighing 0.55 KG/RM including necessary Joining Cleats, Aluminium anodised Snap Beading, Screws, Glazing Clips, Rubber Neoprene Packing, Aluminium anodised Fittings such as Peg Stays 150mm long (1 No.), Hinges 100mm long, type B-21 (2 No.) suitable Handle (2 No.), etc., complete all as specified and as directed.

S&F Door Closer Aluminium (Die Cast) Body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram, complete all as specified and as directed.

S&F Brass Mortice Lock 100mm in size, 2-Lever, Vertical type, complete all as specified and as directed.

S&F Aluminium anodised Harrison Rails (Curtain Rails) 20mm Outer dia, Chromium plated, fixing with and including Brackets, Stops, Rollers, Side Holders, etc, complete all as specified and as directed.

M&L Stainless Steel Wire Cloth having 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed

S&F Sheet Glass 4.8mm thick, Plain, Ordinary quality and glazing with Oil Putty in Square, exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

M&L Aluminium Snap Grid Frame Work of size 605x605mm in False Ceiling, complete all as specified and as directed.

S&F Hangers 4.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed.

S&F HSPC Non-Asbestos Fibre Cement Building Boards 4.0mm thick, Pre-primed, Self Embossed, Textured Designer, fixed or laid/ inserted to GI/ Aluminium Frame Work with Screws, complete all as specified and as directed.

S&F HSPC Non-Asbestos Fibre Cement Building Boards 6.0mm thick, Pre-primed, Self Embossed, Textured Designer, fixed or laid/ inserted to GI/ Aluminium Frame Work with Screws, complete all as specified and as directed.

S&F Prelaminated Particle Boards 12mm thick, Interior grade, Prelaminated One Side with Decorative Choice Lamination and Other Side Balancing White Lamination, fixed with Screws to Timber Frame Work, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Sub-base of Floors, etc., complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick in Floors, Hardstanding, etc., finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed.

M&L Roughening Surfaces of Old Concrete Floor by Picking, Sweeping Clean and Washing down with Water to remove Dust, etc., and Brushing with Neat Cement Slurry @ 3.0 KG/SQM on Cleaned Concrete Surfaces, complete all as specified and as directed.

M&L Non-skid Ceramic Coloured 7.0m to 8.0mm thick, (square/rectangular) area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) in Floors, jointed in Neat Cement Slurry and pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Non-skid Ceramic Coloured 7.0m to 8.0mm thick, (square/rectangular) area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Plinth Protection, finishing Concrete Surfaces Fair and Even, complete all as specified and as directed.

M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick/PCC Blocks or Concrete Works including mixed with WPC, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured and Paid saperately under appropriate Item.

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing Old Painted Steel and Iron Surfaces of any descriptions, over exc. 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade), complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe, complete all as specified and as directed.

S&F Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.

S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule, complete all as specified and as directed.

S&F PTMT Ball Valve 15mm bore (dia), having weight not less than 142 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipes, complete all as specified and as directed.

S&F Vitreous China White Wash Hand Basin 580x450mm with Pedestal (for Hospital use), Flat Back including PTMT Waste Fitting 32mm bore (dia) and Waste Pipe 32mm bore (dia) of Polyethylene of Low or High density, a Pair of Cast Iron Brackets or Erecting Stand duly Painted, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 but excluding Taps, complete all as specified and as directed.

S&F Low Density Polyethylene Pipes (LDPE) 32/40mm bore (dia) of Pressure ratings 6.0 Kg/Sq Cm for drain out waste Water of Wash Hand Basin/Kitchen Sink/ Urinal, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size and 450mm in length with PTMT Nuts, complete all as specified and as directed.

S&F Tubular Towel Rail 60 Cm long, PTMT, fixed with and including Brass Chromium Screws, complete all as specified and as directed.

M&L PVC (SWR) Floor Trap 75mm bore (dia) with Grating, Plain including jointing to Waste Pipe with Solvent Cement and fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate), complete all as specified and as directed.

S&F PVC (SWR) Pipe 75mm bore (dia), Single Socketed, in any length with Rubber Ring Joints, laid in Trenches/Floors or fixing to Walls, complete all as specified and as directed.

S&F PVC (SWR) Bend any type 75mm bore (dia), provided with Access Door, etc., jointing with Solvent Cement, complete all as specified and as directed.

E/M SERVICES/WORKS

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLS multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/FAN/BELL POINT on controlled by One Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLS multi-stranded single core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6/16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Runs of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc., complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping shall deem to be include in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wires required for looping, etc. as ordered will deem to be include in the Quoted Unit Rate.

S&F Switch Piano Flush type, 6 Amp, Single Pole, 1-way, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 6 Amp, 2-in-1, 5 Pin, Flush type, Universal, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 16 Amp, 3 Pin, Flush type, Universal, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Ceiling Rose Surface type, Bakelite 65x50mm, 3 Terminals suitable for 230 Volt AC, 6 Amp and connecting up, complete all as specified and as directed.

S&F LED Tube Light Fitting 1x20 Watt with 20 Watt LED Tube, 4.0 Feet long with Fixtures, Integrated Batten T-5 Nakshatra, P-Series with all Accessories, Pre-wired and connecting up with and including suitable size 3 Core Twisted Flexible Copper Conductor Cable, complete all as specified and as directed. MAKE : C&S, Cat No. LTTB420WLEDP/W or eqivalent in BAJAJ/ HAVELLS

S&F Sheet Metal Enclosure, Single Pole with a 2-Pin and Earth Plug and Socket with and including 1 No. MCB Single Pole, 20 Amp, 240 Volt and connecting up, complete all as specified and as directed.

S&F MCB Single Pole 6 to 32 Amp, 'C' Series, 10 kA, 240 Volt and connecting up, complete all as specified and as directed.

S&F MCB Single Pole & Neutral 40 Amp, 'C' Series 10 kA, 240 Volt and connecting up, complete all as specified and as directed.

S&F Sheet Metal Enclosure Double Door, SPN Distribution Board 6-way, 240 Volt, IP-43 Protection, Painted with Epoxy based Powder coated and suitable for mounting MCB DP/SPN as Incomer and MCB SP as Out-going complete with 200 Amp rated Neutral Bars, Earth Bar connecting Cable Links with Top and Bottom Removable Gland Plate, complete all as specified and as directed.

M&L XLPE insulated, screen, PVC bedded, Galvanised Iron Strips or Wire, armoured, heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional area 10 Sqmm, 2 Core, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing, complete all as specified and as directed.

M/S N K SAI TRADING

FREEZCON

M/s Sashi Enterprise

M/S S. P. ENTERPRISE

D B Construction

M/s PRABIR ENTERPRISE

M/S Raju prasad