CO 30 Beded CHC Building at Nohradhar Tehsil Sangrah Distt Sirmour HP SH Providing E I therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x4.0 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. 3x1.5 Sq. mm.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Supplying and fixing 16 Amps, 240 volts power unit, 2-pole & earth socket and switch on surface or in recess,complete with connections, testing and commissioning etc. as required. Make:-Legrand ,Havells,Anchor,or any other approved by Engineer-in-Charge.

Supplying and fixing metal box for 8moudule along with modular base and cover plate on surface/recess including providing and fixing 3Nos of S.P. 5 pin 5/6 amps modular socket outlet and one No 5/6 amps,modular piano type switch, connections, painting etc. as required.(Computer Point)

Providing and installation of following surface mounting slim round type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,Greatwhite, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following surface mounting slim square type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,Greatwhite, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following surface mounting slim square type LED Panles with extruded aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, C&S, Havells, Bajaj, Greatwhite, Panasonic or any other approved by Engineer-in-Charge.

LED Panel 36W(2'x2')

Supplying and fixing of following LED bulk head fitting with all accessories including making connections, testing etc. as required. Make Greatwhite Philips, Panasonic or any other approved by Engineer-in-Charge.

LED bulk head 5W

Supplying and fixing of fancy Mirror/Dressing lights containing LED/ CFL lamp holder(s) of all sizes and shapes, complete with all accessories but excluding LED/CFL lamp including making connections, testing etc. as required. Make: Philips ,Havells, Panasonic or any other approved by Engineer-in-Charge.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 900 mm sweep (make Havelles Velocity,or at par in Bajaj, Crompton Greaves, Usha, Kahitan or any other approved by Engineer-in-charge.)

Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Providing and installation of Light duty, plastic body, Ventilating Fan, Light duty, (Plastic body) 250 mm sweep in the existing opening, by means of suitable rag-bolts/nuts, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respects to the satisfaction of the Engineer-in-Charge:- Make: Havells, Bajaj, Crompton Greaves, Usha, Kahitan or any other approved by Engineer-in-charge.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Providing and installation of following type of LED batten (Commercial Type) with aluminium housing provided for efficient heat dissipation, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Syska, Havells, Bajaj, Greatwhite, Panasonic or any other approved by Engineer-in-Charge.

LED Batten Light 10W

LED Batten Light 20W

Providing & fixing of 4 module LED foot light of white color 5 Watt complete in all respect including making connections, testing etc. as required. Make:Greatwhite ,Philips, Panasonic Bajaj,Greatwhite, C&S, or any other approved by Engineer-in-Charge..

Supplying and fixing of fancy wall bracket containing thread type CFL/LED lamp holder(s) of all sizes and shapes, complete with all accessories but excluding CFL/LED lamp including making connections, testing etc. as required. Make:Havells ,Philips, Panasonic or any other approved by Engineer-in-Charge..

Supplying and fixing of fancy wall bracket of chrome finish colour with opal glass diffuser made of mild steel, with single holder containing thread type LED lamp holder(s) of all sizes and shapes, complete with all accessories but excluding led lamp including making connections, testing etc. as required. Make Jaquar, Philips,Havells Lighting complete in all respect as approved by Engineer-in-Charge

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-8 Way

Double door-12 Way

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Cat.-A

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-MCBDP-63 Amp Cat-A

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. Cat-A.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- 25 Liter capacity water heater (Cat-A)

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required.

32 Amp. Category-A

63 Amp. Category-A

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Supplying and erection of sheet metal cubical pedestal(confirming to ( IEC code -61439) of dimensions 2100mm (height) x 2800mm (width) x 450mm (deep) with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments including 1 Nos MCCB 500/630 Amp (4 Pole), 1 Nos MCCB 400 Amp. (4 Pole), 1 Nos MCCB 200 Amp. (4 Pole), 7 Nos MCCB 63 Amp. (4 Pole) ,5 Nos MCCB 32 Amp. (4 Pole), Change over switch 200 Amp (4 Pole), copper busbar Strips 800 Amp.,400 Amp.,200 Amp. ,metering module& indicating lamp set. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form

Supplying and erection light sub- panel (confirming to IEC code -61439) of dimensions 700mm (height) x 700mm (width) x 300mm (deep) with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to hose 32 Amp. TP&N MCCB,63 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying and erection light sub- panel (confirming to IEC code -61439) of dimensions 700mm (height) x 700mm (width) x 300mm (deep) with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to hose 63Amp. TP&N MCCB,63 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 16 sq. mm (four core)

Armoured cable 25 sq. mm (3.5 core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-

Armoured cable 400 sq. mm (3.5 core)

Supplying & fixing, testing, commisioning of storage type water cooler with reciprocating compressor of ISI marked, environment friendly new age refigerant of rugged stainless steel/ galvanized steel body. Total storage capacity 120 Lt. and cooling capacity 80 Lt/Hr with 2 Nos of faucets and all accessories etc. . Make Usha, Blue Star, Carrier or its equivalent make.

Supplying of Aluminium foldable with platform ladder, extra hand rail with broad non clip corrugated flat steps & safety guard rail.Auto folding platform 250mm X 250mm, sleek extra hand rail solid rubber shoes with 4 legs, light in weight foldable 6 feet platform height. Make:- Alco ladders, Step-up ladders, Climbus ladders or any other approved by Engineer-in-charge.

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Providing and installation of LED 5 W retrofit lamp B-22/E-27 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Greatwhite, Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

GURU NANAK ELECTRICALS