Renovation of West Facing RCC roof Building in PUE School at Rasichettipalayam and Renovation of East facing RCC roof building in PUES at Orakaliyur and Renovation of Tiled roof building in PUES at Orakaliyur and Renovation of Kitchen shed in PUES at

Amount

Dismantling and removal of Pressed Tiles & Weathering Course

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Removal of Cement Plastering Including all Charges etc…, Compelete

Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc complete

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting two coats with enamel paint for ABL Boards Black Boards,etc,as per specification and as directed

Provision for Bala Painting

Brick work in cement mortar 1:3 mix Partition wall and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffoldin

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

Brick work in cement mortar 1:3 mix Partition wall and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Providing cuddapah slab 38 to 40mm for shelfs etc.,

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffoldin

Brick work in cement mortar 1:3 mix Partition wall and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffoldin

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt,handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proofplywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work.

Dismantling and removal of Pressed Tiles & Weathering Course

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Removal of Cement Plastering Including all Charges etc…, Compelete

Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc complete

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting two coats with enamel paint for ABL Boards Black Boards,etc,as per specification and as directed

Provision for Bala Painting

Brick work in cement mortar 1:3 mix Partition wall and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying & erecting centering for sides & soffits including necessary supports & strutting upto 3.29m height for plane surface in all cross bracings using mild steel sheets etc.,

Supplying and fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standard specification.

Reinforced Cement Concrete 1:1.5:3 mix using 20mm ISS HBG metal for all RCC item of works excluding cost of Reinforcement and fabricating charges, centering and shuttering but including curing as directed by the departmental officers complete complying with standard specifications Rate for 10m³

scratch proof ceromic tiles of size 305x305x6mm cost and conveyance of all materials to site and all labour charges etc complete

Earth work Excavation for foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Cement concrete 1:4:8 mix using 40mm ISS metal including cost conveyance of all materials to site and all labour charges for mixing,and laying and curing etc complete for 10 cum.

Supplying and filling with collected gravel including all cost of materials and labour charges etc.

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Providing Granolithic flooring 1:2:4 mix,to 20 mm thick including cost of all at site etc complete and as directed

Painting two coats with Exterior Emulsion using best quality of Emulsion, brushes, scaffolding charges etc., complete with standard specifications and as directed by the departmental officers

Brick work in cement mortar 1:3 mix Partition wall and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffoldin

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

Brick work in cement mortar 1:3 mix Partition wall and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Providing cuddapah slab 38 to 40mm for shelfs etc.,

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffoldin

Brick work in cement mortar 1:3 mix Partition wall and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffoldin

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt,handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proofplywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work.

Dismantling and removing of Mangalore tiled roofing etc, as per specification and directed

Dismantling and removing of Country Wood Rafters,Planks,Reepers etc, as per specification and directed

Supplying of new country Wood Rafters and Reepers Including all charges etc…, complete

Roofing the Mangalore Tiled Roof including all cost etc, completed etc.,

Clean Removal of Wall Plastering Including all charges etc.., complete

Plastering with CM 1:5 mix with 12 mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats over Black boards paint works such as best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officer

Painting two coats over Old Wooden Works such as doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications

Provision for BALA Painting

Supplyand fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting SD 88

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD 110

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb SD 83

Earth work Excavation for foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Cement concrete 1:4:8 mix using 40mm ISS metal including cost conveyance of all materials to site and all labour charges for mixing,and laying and curing etc complete for 10 cum.

Supplying and filling with collected gravel including all cost of materials and labour charges etc.

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Providing Granolithic flooring 1:2:4 mix,to 20 mm thick including cost of all at site etc complete and as directed

Painting two coats with Exterior Emulsion using best quality of Emulsion, brushes, scaffolding charges etc., complete with standard specifications and as directed by the departmental officers

Brick Partition wall work in cement mortar 1:3 mix and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Brick work in cement mortar 1:3 mix Partition wall and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying & erecting centering for sides & soffits including necessary supports & strutting upto 3.29m height for plane surface in all cross bracings using mild steel sheets etc.,

Supplying and fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standard specification.

Reinforced Cement Concrete 1:1.5:3 mix using 20mm ISS HBG metal for all RCC item of works excluding cost of Reinforcement and fabricating charges, centering and shuttering but including curing as directed by the departmental officers complete complying with standard specifications Rate for 10m³

scratch proof ceromic tiles of size 305x305x6mm cost and conveyance of all materials to site and all labour charges etc complete

Brick work in cement mortar 1:3 mix Partition wall and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffoldin

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

Brick work in cement mortar 1:3 mix Partition wall and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffoldin

Providing cuddapah slab 38 to 40mm for shelfs etc., all complete

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt,handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proofplywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work.

Dismantling and removal of Pressed Tiles & Weathering Course

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Removal of Cement Plastering Including all Charges etc…, Compelete

Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Supply of New Steel door including all charges etc.., complete Steel door (0.90mx1.80m)

Supply of New Steel Window including all charges etc.., complete Steel Window (1.20mx1.15m)

Labour Charges for fixing New Steel Door including all charges etc.., complete

Labour Charges for fixing New Steel Window including all charges etc.., complete

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc complete

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER)

Wiring with 2 x 1.5 sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil) SD 22

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting SD 87

Supply and fixing of 1400mm (56") sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 110

M.Manickam (BID ID -1168724)