PROVISION OF BOUNDARY WALL AT TECHNICAL AREA AT AFSSR AND PROVISION OF TILES FOR WALKING TRACK IN JOGGERS PARK AT AFSSR UNDER GE AF GURGAON

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

M&L for Returning filling in with soil , inlcuidng spreading, levelling, watering and well ramming in layers not exc 25 cm thicks etc complete all as specified and as directed.

M&L for PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed.

M&L for TMT bars 5 mm dia and over, upto and including 10 mm dia as in stirrups, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

M&L for formwork to sides of footing, sides and soffits of plinth beams etc finished even and fair surfaces complete all as specified and as directed.

M&L for formwork to sides of columns, pillars, posts, struts square or rectengular is section with rough finished surfaces complete all as specified and as directed.

M&L for formwork to sides & soffit of beams and similar works with rough finished surfaces complete all as specified and as directed.

M&L for Reinforcement cement concrete M-25 ( Design mix) as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc complete all as specified and as directed.

M&L for Reinforcement cement concrete M-25 ( Design mix) as in columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M&L for Reinforcement cement concrete M-25 ( Design mix) as in tie beam, top beam with coping etc complete all as specified and as directed.

M&L for brick work with sub class 'b' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and as directed .

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete wall surface etc finished even and fair including water proofing compound @ 3% by weight of cement complete all as specified and as directed. Rate of WPC included in quoted rates.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint complete all as specified and as directed.

M&L for Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete as specified and as directed.

Removing excavated soil to a distance exc 1.50 KM mtr but not exceeding 5.00 KM mtr and depositing where directed etc complete all as specified and as directed.

S&F mild steel angles, tees, flats, C section, MS square bars etc as in steel gates, steel posts and struts in fencing, grills fixed to framed or indipendent members including embedding in concrete and screwing and welding whereever required etc. including cut to shape as directed, drilling holes, notching for wire etc including all necessary drilling, bolting, welding or riveting and similar work conforming to FE-290 Gde E-165 complete all as specified and as directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed. Note: - Each line of wire to be measured separately.

S&F hot dipped galvanised concertina razer tape coil 915mm dia, spring steel high tensile centre core wire 2.5 mm dia having 200-250gm zinc coating, 0.5 mm thick razer sheet having 90-120gm, zinc coating & min 10 mm width ( before wraping centre core wire),with GI clip 1.6 mm thick complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25mm thick Cement concrete (1:2:4) type B-0 as in sub-floors, sub-bases, floors and pavings etc. complete all as specified and as directed.

M&L for exterior grade, coloured glossy finish and highly abrassive paver designer endura tiles of size 30cm x 30cm x 9-10mm thick (as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over and including 15 mm thick screed bed in cm 1:6 complete all as specifed and as directed.

M&L for cement concrete type B-2 1:2:4 as in filling or mass concrete and making surface good or edges protection kerbs complete all as specified and as directed.

P R Constructions

M/S PARKASH ENTERPRISES

HANUMAN BUILDERS

M/S ujjwal associates

akhil enterprises

Chaudhary Constructions

M/S GEETANJALI ENTERPRISES

k k enterprises

Shakashi Construction Co.

M/S VIJAY TRADERS