Rejuvenation of existing open wells and Kalapatti Rice Mill Street Kuttaiin East Zone within the Coimbatore City Municipal Corporation (CCMC) Area in Ward No 08 East Zone

Clearing of bushes, grass, and undergrowth around and inside the open well area including uprooting of vegetation and disposal of the same up to a lead of 50 meters, complete as directed by the Engineer-in-Charge.

For Removing Thick Bushes In Well Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in a stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal and vertical tubes joint with cup and lock system with M.S. tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc., and maintaining it in a serviceable condition for execution of work of cleaning and/or pointing and/or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc., wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Random rubble masonry in cement motor 1:5 (one Part of cement, Five part of Crushed Stone Sand (M- Sand)) mix using all granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as per standard specification

Pointing Random Rubble masonry with Cement Mortar1:3 (One Part of Cement and Three Part of Palstering Sand (P- Sand)) to flush pointing , curing etc complete - 10 sqm S.I.327

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, Complying with standard specifications

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over apriming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. (Sl.No.395)

Painting old/new iron work over well ( grills, weldmesh sceens etc) , two coats over one coat of primer

Supplying laying and jointing G.I. Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excluding cost of such specials cutting threading of pipes and fixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holes in roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc.,

Providing Barbed wire (Two Ply and Four Pronged) fencing fixing horizontally in 5 rows, with L angle 50X50X6 mm ht. 2.5m (0.45m below G.C.) @ 2.5m interval set in 1:3:6 mix using 20mm jelly including tying the binding wire etc., complete, over UCR Masonry of 0.45m thick and 1m height. (0.5m below ground and 0.5m above ground) including necessasry PCC, Coping in M-150, pointing in CM: 1:3 and painting with cement paint,etc. complete.

Providing and fixing wicket gate 1.0 M Wide foor compound with 20 mm dia G.I. PIPE APPROVED GRILL WORK, RCC M-155 Side pillars of 25 cm x 40 cm x 2.5 M height, its foundation, finishing, painting, etc, complete.

Panel board (for 7.5hp Motor)

Supplying and erecting 525 V 3 phase, 50 Hz., APP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of all polypropylene condensers (APP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

( 7.5HP-5.5KVAR )

Supply of 2 core 4 sq.mm Aluminium conductor PVC insulated LTUG cable

Maintenance of 7.5 hp pump including servicing and maintenance of key items such as; Lubrication, bearing, Seals & Gasket, Impeller, Valves, Piping, Electrical components, performance monitoring, Cleaning etc.

Maintenance for 3 Years For First year

For Second year

For Third year